Tel: +86-371-86151827

12cr17ni7 steel plate nm360

Steel grade:12cr17ni7 steel plate nm360

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

12cr17ni7 steel plate nm360 Introduction

Wear resistant steel plate AR360, AR400, AR500, NM360 ...

Jin Chao Yang can supply Wear resistant steel plate AR360, AR400, AR500, NM360, NM400, NM500 with Executive Standard:JIS G4051, GB711, YB/T107, ASTM, welcome to inquiry

China GBT 12Cr17Ni7 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 12Cr17Ni7 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422[PDF]

Datasheet for Steel Grades Special Alloy 12Cr17Ni7

This page is mainly introduced the 12Cr17Ni7 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of 12Cr17Ni7,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

GBT1220 12Cr17Ni7 steel,12Cr17Ni7 stainless steel - BEBON ...

GB/T122012Cr17Ni7--- Austenitic stainless steel. Austenitic stainless steel 12Cr17Ni7 main features and application. The properties for 12Cr17Ni7 steel are specified for flat rolled product (plate, sheet and coil) in GB/T1220, The Corrosion resistance of 12Cr17Ni7 steel is similar to that of 06Cr19Ni10 steel.

NM450/NM500/NM550 Steel Plate-GNEE GROUP Discount …

Product Introduction. NM 400/ NM45 0 Wear-Resistant Steel Plate (Abrasion Resistant) Hardox s teel p late is used in the manufacture of n umerous products; Conveyors, Chutes & Liners and Aggregate Containers are a few examples of uses for the hot rolled coil-NM450 steel sheet.Typically, hot rolled steel plart-NM400 steel plate is made in the as-rolled condition.

NM400 wear/ abrasion resistant steel plate with improved ...

NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa.An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

NM400 steel,NM400 steel plates--Xin Steel Industrial Co., Ltd

XINSTEEL INDUSTRIAL CO.,LTD offering high quality of abrasion resistance steel plates nm400,nm400 steels with more experiences in China. English Español. Home; ... NM400 steel,NM400 steel plates. ... High strength abrasion resistant steel plates NM400 . Steel Grade:NM300,NM360,NM400,NM450,NM500,NM550,NM600 .

GBT1220 12Cr17Ni7 steel,12Cr17Ni7 stainless steel - …

GB/T122012Cr17Ni7--- Austenitic stainless steel. Austenitic stainless steel 12Cr17Ni7 main features and application. The properties for 12Cr17Ni7 steel are specified for flat rolled product (plate, sheet and coil) in GB/T1220, The Corrosion resistance of 12Cr17Ni7 steel is similar to that of 06Cr19Ni10 steel.

NM400 steel,NM400 steel plates--Xin Steel Industrial Co., Ltd

XINSTEEL INDUSTRIAL CO.,LTD offering high quality of abrasion resistance steel plates nm400,nm400 steels with more experiences in China. English Español. Home; ... NM400 steel,NM400 steel plates. ... High strength abrasion resistant steel plates NM400 . Steel Grade:NM300,NM360,NM400,NM450,NM500,NM550,NM600 .

NM360 Hot Rolled Steel Plate Suppliers and Manufacturers ...

Find nm360 hot rolled steel plate here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

NM400 NM500 Steel Plate - srilankasports.org

Wear Resistant Steel Plate . GRADE NM360, NM400, NM500, NM550 WNM360, WNM400, WNM450, WNM500 NM400 is a high strength wear-resistant steel plate. NM400 has quite high mechanical strength. Its mechanical properties are 3 times to 5 times that of ordinary low alloy steel plates, and it can significantly improve the wear resistance of mechanical ...

steel price of NM400 tensile,steel plate price,where to ...

Abrasion Resistant Steel Plate-WZB - steels-supplier. NM360 and NM400 wear-resistant steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, cement machinery, metallurgical machinery, brick machinery and other products parts. Also used as …

12Cr17Ni7(1Cr17Ni7) GB/T4237 Austenitic stainless steel ...

12Cr17Ni7(1Cr17Ni7) stainless steel plate/coil is used in railway, vehicles, belt conveyors, bolts and nuts, springs. 12Cr17Ni7(1Cr17Ni7) GB/T4237 Austenitic stainless steel plate/coil Other Name 12Cr17Ni7 stainless steel plate/coil, 1Cr17Ni7 stainless steel plate/coil

Nm400 Steel, Nm400 Steel Suppliers and Manufacturers at ...

Alibaba offers 4,801 nm400 steel products. About 85% of these are steel sheets, 1% are steel round bars, and 1% are steel pipes. A wide variety of nm400 steel options are available to you, such as en, din, and aisi. You can also choose from free samples, paid samples. There are 4,804 nm400 steel suppliers, mainly located in Asia.

China Nm400 Nm500 Hot Rolled Wear Resistant Steel Plate ...

Steel Plate, Nm450 Steel Plate, Wnm400A Wear Plate manufacturer / supplier in China, offering Nm400 Nm500 Hot Rolled Wear Resistant Steel Plate, Colorful Afp Aluzinc Coated Galvalume Steel Coil for Steel Material, Cold Rolled Afp Aluzinc Coated Galvalume Steel Coil for Decorations and so on.

NM360-WuYang steel & iron Co.,LTD.

Wear resistant steel plate of NM360/400 thickness 10-30mm is recommended. 7) construction machinery: loader, bulldozer, excavator bucket board, side blade, bucket bottom plate, blade, rotary drilling rig, drill rod. Such machines require particularly tough and wear-resistant high strength wear-resistant steel plate, available material for NM500 ...

NM400 hot rolled abrasive steel plates - pond-pro

China steel plate supplier NM400 millsteel grade,steel ...Buy NM400 hot rolled abrasive steel plates NM360 NM400 NM450 NM500 HADOX 450 DOMEX 450 from Metal B2B, NM400 hot rolled abrasive steel plates features: abrasive steel plate, 1. Thickness 6-60mm, 2. Width 1800-3000mm, 3.

Aisi 4340 Steel Flats - hopkinsplasticsurgery

4340 Alloy Flat Steel, 4340 Alloy Flat Steel Suppliers and ...Alibaba offers 173 4340 alloy flat steel products. About 55% of these are steel round bars, 20% are steel sheets, and 12% are flat steel. A wide variety of 4340 alloy flat steel options are available to you, such as aisi, astm, and gb.

Abrasion Resistant Steel Plate-WZB - steels-supplier

WNM-Abrasion Resistant Steel Plate. WZB-NM360, WZB-NM400, WZB-NM500, WZB-NM500, WZB-NM550 are steel grades of wear steel plate made of Wugang, which is used for high wear and high impact applications, it can also be used as high strength structural steel with yield strength larger than 800MPa. The premise of the steel plate has a good impact toughness and welding performance …

NM500 High strength abrasion resistant steel plate,NM500 ...

NM500 High strength abrasion resistant steel plate,NM500 GB/T 24186-2009 NM500 High strength abrasion resistant steel plate for construction machine in the quenched, tempered condition and TMCP heat treatment. NM500 Chemical requirement Gra

NM360 steel plate,NM360 Wear Resistant Steel - steel …

NM360 wear plate belongs to (wear plate) series, also known as wear-three hundred sixty. N is resistant (nai) M is the mill (mo) of two Chinese characters of the first phonetic alphabet, 360 represents the average Brinell hardness of this steel plate

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.