Tel: +86-371-86151827

1 2436 cold work steel plate aisi d6 tool steel flat bar

Steel grade:1 2436 cold work steel plate aisi d6 tool steel flat bar

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

1 2436 cold work steel plate aisi d6 tool steel flat bar Introduction

AISI D6 Tool Steel | 1.2436 | X210CrW12 | SKD2 - Otai ...

AISI D6 tool steel is a high-carbon, 12% chromium alloy cold work tool steel with tungsten. D6 steel is an air hardening alloy tool steel with excellent resistance to wear and abrasion. As a high carbon high chromium tool steel D6 has better through hardening properties than D3 steel and dimensional stability combined with high resistance to tempering.

Cold Work Tool Steel - Otai Special Steel

AISI / ASTM A681 O1 Tool Steel is a low alloy cold work tool steel that must be oil-quenched in heat treatment. Tools and dies made from O1 Flat Ground will have good wearing and abrasive qualities.

Mat.No. AISI D6 Tool Steel | 1.2436 | X210CrW12 | SKD2 ...

1. Supply Range of ASTM D6 Tool Steel D6 Steel Round Bar: diameter 8mm – 4000mm D6 Steel Plate: thickness 2mm –300mm x width 200mm – 800mm Other sizes of D6 oil steel or as per customer’s requirements Surface Finish: Black, Sand Blasting, Rough Machined, Peeled, Turned or …

D6/1.2436 Cold Work Tool Steel, Alloy Tool Steel

Pre: D3, 1.2080 Cold Work Tool Steel, Alloy Tool Steel Next: DC53 Cold Work Tool Steel, Alloy Tool Steel

1.2436 Steel, 1.2436 Steel Suppliers and Manufacturers at ...

Alibaba offers 266 1.2436 steel products. About 66% of these are steel round bars, 9% are steel sheets. A wide variety of 1.2436 steel options are available to you, such as en, din, and aisi.

China DIN 1.2436 / AISI D6 Cold Work Steel Round Bar ...

Steel Round Bar, 1.2346 Tool Steel Bar, D6 Steel Bar manufacturer / supplier in China, offering DIN 1.2436 / AISI D6 Cold Work Steel Round Bar, Hot Sale 6063 Aluminium Anti-Slip Plate, China Manufacturer 2024 Aluminum Tube Pipe for Decoration, Industry and so on.

DIN 1.2436 / AISI D6 - ALTA Special Steel Co.,Ltd, Tool ...

High carbon high chromium tool steel in flat and round bar. This is a tool steel grade offering very high wear resistance with edge holding quality. It is an air hardening alloy tool steel with excellent resistance to wear and abrasion. As a high carbon high chromium tool steel 1.2436 has good through hardening properties and dimensional ...

1.2436 D6 Steel, 1.2436 D6 Steel Suppliers and ...

Alibaba offers 232 1.2436 d6 steel products. About 50% of these are steel round bars, 7% are steel sheets, and 1% are steel pipes. A wide variety of 1.2436 d6 steel options are available to you, such as en, din, and aisi.

D6 Tool Steel | High-Carbon, High-Chromium, Cold-Work ...

D6 Tool Steel | High-Carbon, High-Chromium, Cold-Work Steel (UNS T30406) D6 tool steel china supplier and stockholders. ASTM AISI D6 Tool Steel is a cold work tool steel grade with widely […]

D6 skd2 1 2436 Cold Work Steel - cafethuys.nl

Cr12w D6 Skd2 Cold Work Steel Plate - alibaba. Cr12w D6 Skd2 Cold Work Steel Plate , Find Complete Details about Cr12w D6 Skd2 Cold Work Steel Plate,D6 Steel Plate,1.2436 Tool Steel Flat,Skd2 Cold Formed Steel Sheet from Supplier or Manufacturer-Dongguan Songshun Mould Steel …

China 1.2436 D6 Cold Work Die Steel Sheet - China Mould ...

Mould Steel Sheet, Mold Steel, Special Steel manufacturer / supplier in China, offering 1.2436 D6 Cold Work Die Steel Sheet, 1.4104 AISI 430f Stainless Steel Plate Flat Steel Bar, H13 Special Steel Bar for Making Tool and so on.

D6 Tool Steel - D6 Tool Steel Suppliers, Buyers ...

Product Name: Cr12W/ D6/1.2436/round bar/flat bar/cold work tool steel/die steel/mould steel A kind of cold work tool steel, belonging to Ledeburitic steel of high carbon,high chromium and high abrasion resistance; With quite good hardenability,...

1.2436 steel bar - natural-elements-online

1.2436 (X210Crw12) D6 Cold Work Tool Mould Steel Bar. Mold Steel Sheet, Special Steel, K107 manufacturer / supplier in China, offering 1.2436 (X210Crw12) D6 Cold Work Tool Mould Steel Bar, H13 Special Steel Bar for Making Tool, 1.2316 ASTM 420 Mould Steel for Making Plastic Products and so on. D6/1.2436 Cold Work Tool Steel, Alloy Tool Steel

D6 skd2 1 2436 Cold Work Steel - cafethuys.nl

Cr12w D6 Skd2 Cold Work Steel Plate - alibaba. Cr12w D6 Skd2 Cold Work Steel Plate , Find Complete Details about Cr12w D6 Skd2 Cold Work Steel Plate,D6 Steel Plate,1.2436 Tool Steel Flat,Skd2 Cold Formed Steel Sheet from Supplier or Manufacturer-Dongguan Songshun Mould Steel …

cold work tool steel bar d6 - w3s.in

D6 Tool Steel | High-Carbon, High-Chromium, Cold-Work ... ASTM AISI D6 Tool Steel is a cold work tool steel grade with widely application. D6 is similar with SKD1 Cold work tool steel, no matter in properties or in applications. the cost and price for both D6 and SKD1 steels only have a little different.

D3 Tool Steel | High-Carbon, High-Chromium, Cold-Work ...

D3 Tool Steel | High-Carbon, High-Chromium, Cold-Work Steel (UNS T30403) ASTM AISI D3 Tool Steel is a cold work tool steel grade with widely application. ... We provide D3 steel square bar, D3 round steel bar and D3 steel flat,steel plate Size range as below: ASTM D3 Steel Round Bar: 8mm-800mm ... Contact Otai speical steel for Hot work ASTM D6 ...

D6 skd2 1 2436 Cold Work Steel Plate - cafethuys.nl

Cr12w D6 Skd2 Cold Work Steel Plate - alibaba. Cr12w D6 Skd2 Cold Work Steel Plate , Find Complete Details about Cr12w D6 Skd2 Cold Work Steel Plate,D6 Steel Plate,1.2436 Tool Steel Flat,Skd2 Cold Formed Steel Sheet from Supplier or Manufacturer-Dongguan Songshun Mould Steel …

China Cold Work Tool Steel AISI D6/DIN 1.2436 - China 1 ...

China Cold Work Tool Steel AISI D6/DIN 1.2436, Find details about China 1.2436 Steel, Tool Steel from Cold Work Tool Steel AISI D6/DIN 1.2436 - Huangshi …

1.2436 steel round bar

1.2436 steel round bar. ... cold work steel,special alloy steel GB Cr12W/DIN 1.2436/AISI D6 . Product Description ... High carbon and high chromium, dimensionally stable, ledeburitic 12 % Cr alloyed cold work tool steel, non-deforming, better hardenability.

1 2436 Cold Work Hot Rolled Steel Sheet Die Steel - w3s.in

1.2436 Steel- Din Cold Work Alloy Tool Steel- Made in ...1.2436 is a German Cold work tool alloy steel material grade.it is shock resisting steel. it belong to DIN 17350 standard. Digital Grade material number 1.2436. Metal Steel Grade W-Nr X210CrW12 It is a die steel, use in extrusion moulds, Hot Cast moulds. like aluminium production, Aluminium cutting mold.

D6 Tool Steel - D6 Tool Steel Suppliers, Buyers ...

Product Name: Cr12W/ D6/1.2436/round bar/flat bar/cold work tool steel/die steel/mould steel A kind of cold work tool steel, belonging to Ledeburitic steel of high carbon,high chromium and high abrasion resistance; With quite good hardenability,...

Abrams Premium Steel - Premium 1.2436

Due to its tungsten content this steel grade has a higher tempering resistance and higher wear permanence compared to AISI / SAE 3 mod. Applications The Tool Steel AISI / SAE D6 is suitable for the following applications: Blanking tools, stamping tools, embossing tools, scraping tools, trimming tools, woodworking tools, drawing tools, press ...

Din 1.2436 Aisi D6 Construction Round Bar Tool Hot Rolled ...

Din 1.2436 Aisi D6 Construction Round Bar Tool Hot Rolled Steel Factory Price, US $ 1,000 - 2,500 / Ton, Alloy Steel, AISI, Guangdong, China (Mainland).Source from Dongguan Songshun Mould Steel Co., Ltd. on Alibaba.

DIN 1.2436 / AISI D6 Tool Steel - Alta Special Steel Co.,Ltd

turkishbusinessplatform› …› Stainless Steel BarsDIN 1.2436 / AISI D6 Tool Steel. ALTA SPECIAL STEEL supply DIN 1.2436 / AISI D6 Tool Steel in round bar, plate, square, sheet and block. Min. Order Quantity : 1 ton(s). HS Code: 722840

1.2436 (X210Crw12) D6 Cold Work Tool Mould Steel Bar

Mold Steel Sheet, Special Steel, K107 manufacturer / supplier in China, offering 1.2436 (X210Crw12) D6 Cold Work Tool Mould Steel Bar, Free Cutting Steel Tool Steel Bar (4340), Copper Alloy Tin Bronze Round Bar (CuSn12, CuSn10, CuSn8) and so on.

D6 Round Alloy Steel Bar 1.2436 - srilankasports.org

Hot Rolled Alloy AISI D6 Steel DIN 1.2436 mold Steel Round ... 1.2379 Tool Steel Round Bar, SKD11 Tool Steel Round Bar, Cr12Mo1V1 Tool Steel Round Bar manufacturer / supplier in China, offering D2 1.2379 D3 1.2080 D6 1.2436 H13 1.2344 Tool Steel, Alloy Steel Plate AISI 5140 Round Bar, Factory Directly Alloy Steel Bar 5140 and so on.

aisi d6 steel round bar - natural-elements-online

Aisi D6/din 1.2436 Tool Steel Round Bar - Buy D6 Tool ... DIN 1.2436 tool steel round bar 2.Application 1.2436 / D6 cold work steel is used in cutting and drawing tools of high wear resistance,rolls with high dimensional stability,deep drawing tools,tools of wire,bar and tube production,cold shear blades for thin sheets.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.