Tel: +86-371-86151827

317l stainless steel sheet building material

Steel grade:317l stainless steel sheet building material

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

317l stainless steel sheet building material Introduction

Alloy 317L Austenitic Stainless Steel Plate - Sandmeyer Steel

General Properties. Alloy 317L (UNS S31703) is a lowcarbon corrosion resistant austenitic chromium-nickel-molybdenum stainless steel. The high levels of these elements assure the alloy has superior chloride pitting and general corrosion resistance to the conventional 304/304L and 316/316L grades.

Stainless Steel 317/ 317L - Aircraft Materials

Alloy 317 and 317L are molybdenum-bearing austenitic stainless steels. Due to the molybdenum content of 3-4% 317 and 317L are more resistant to general corrosion and pitting/crevice corrosion than type 304.317 and 317L are used in the Food, Pharmaceutical, Marine and Architecture industries.

Stainless Steel Grade 317L (UNS S31703) - Material Science

Topics Covered

317L - Rolled Alloys, Inc.

317L is a molybdenum containing austenitic stainless steel, with improved corrosion resistance over 304/304L and 316/316L stainless steel. The increased levels of chromium, nickel and molybdenum over 316L stainless steel improve chloride pitting resistance and general corrosion.

317L Stainless Steel | Penn Stainless Products

General Properties. Alloy 317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids.

317 Stainless Steel 317L Round-Bar-Supplier-Sheet-Pipe

317 Stainless Steel is an austenitic stainless steel which contains molybdenum. This grade has improved corrosion resistance over 304/304L and 316/316L. 317/317L By controlling the addition of nitrogen, 317L commonly meets the properties of the straight …

317/317L Stainless Steel Bar - National Specialty Alloys

317/317L Stainless Steel Bar UNS S31700/S31703 (Dual Certified) 317 stainless steel, also known as UNS S31700 and Grade 317, is primarily comprised of 18% to 20% chromium and 11% to 15% nickel along with trace amounts of carbon, phosphorus, sulfur, silicon and balanced with iron.[PDF]

Specification Sheet: Alloy 317L - Stainless Steel Plate ...

however the material will harden due to cold working. Alloy 317L can be easily welded and processed by standard shop fabrication practices. Specification Sheet: Alloy 317L (UNS S31703) W. Nr. 1.4438 An Austenitic Stainless Steel with High Levels of Chromium, Nickel and Molybdenum for Enhanced Corrosion Resistance When[PDF]

Stainless 316, 316L, 317, 317L - Specialty Stainless Steel ...

Stainless 316, 316L, 317, 317L 1 .888 282 3292 | UPMET.COM. Specific Heat . Magnetic Permeability . Mechanical Properties. Minimum mechanical properties for annealed Types 316, 316L, 317 and 317L austenitic stainless steel plate, sheet and strip as required by ASTM specifications A240 and ASME specification SA-240, are shown below. Minimum Room

317l Stainless Steel Sheet Building Material - gofschools.org

Stainless Steel Cold Rolled Strip/Belt/Coil 316ti 317L 347. Building Material, Steel Products, Steel Strip manufacturer / supplier in China, offering Stainless Steel Cold Rolled Strip/Belt/Coil 316ti 317L 347, Stainless Steel Plate for Elevator Sheet 321, ASTM 304 Stainless Steel Cold Rolled 2b …

Building Material 201 202 304 304L 316 316L Steel ...

China S316 Building Material Stainless Steel Sheet . Steel Plate, 201 202 304 316L 317L 321 430, 304 2b Finish Stainless Steel Plate manufacturer / supplier in China, offering S316 Building Material Stainless Steel Sheet, High Quality Angle Steel (2#~20#), Galvanized Building Material I Beam H Beam Steel and so on.

317/317L Stainless Steel Bar - National Specialty Alloys

317/317L Stainless Steel Bar UNS S31700/S31703 (Dual Certified) 317 stainless steel, also known as UNS S31700 and Grade 317, is primarily comprised of 18% to 20% chromium and 11% to 15% nickel along with trace amounts of carbon, phosphorus, sulfur, silicon and balanced with iron.

Stainless Steel 317L | Elgin Fasteners

Do you need custom fasteners created with Stainless Steel 317L? Since our inception, Elgin Fastener Group has met every challenge of providing Quality, Timely, …

317 Stainless Steel 317L Round-Bar-Supplier-Sheet-Pipe

317 Stainless Steel is an austenitic stainless steel which contains molybdenum. This grade has improved corrosion resistance over 304/304L and 316/316L. 317/317L By controlling the addition of nitrogen, 317L commonly meets the properties of the straight …

Stainless Steel 317L Plates Suppliers, S31703, 1.4438 Sheets

steelplates.in› Stainless Steel 317L317L Stainless Steel Coils, Sheets, Plates Suppliers, Distributors – UNS S31703, 1.4438. An ISO 9001:2008 Certified Company, Metline Industries (Steel Plates, Sheets and Coil Division) is a leading stockholder, supplier and exporter of ASTM A240 317L Stainless Steel Coils, Sheets and Plates in India and Worldwide.

AISI 317 (S31700) Stainless Steel :: MakeItFrom

AISI 317 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 317 is the AISI designation for this material. S31700 is the UNS number. Additionally, the British Standard (BS) designation is 317S16. The properties of AISI 317 stainless steel include two common variations.

building material 410 stainless steel sheet

Prime 304 430 Stainless Steel Coil Sheet For Building Material. Prime 304 430 Stainless Steel Coil Sheet For Building Material. We are mainly engaged in R&D and production of steel product and steel machining,the Prime 304 430 Stainless Steel Coil Sheet For Building Material and services have covered in more than 100 countries around the world,provide the steel procurement One-Stop …

Building Metal 304 Stainless Steel Sheet Material

302 Mirror Stainless Steel Sheet Building Material. 304 Stainless Steel Sheet Of Different Thick. 304 Perforated Sheet - Online Metal Store. 304 Perforated Sheet. Stainless Steel Perforated Sheet T-304 also known perforated screen, is an excellent choice for its tensile strength, high resistance to corrosion, and high fabrication ability.

Stainless Steel - Grade 317 (UNS S31700) - Material Science

Stainless steels are known as high-alloy steels. They consist about 4-30% of chromium. They are classified into martensitic, austenitic, and ferritic steels based on their crystalline structure. Grade 317 stainless steel is a modified version of 316 stainless steel. It has high strength and ...

Building Material Stainless Steel Sheet Plate Price - Buy ...

Building Material Stainless Steel Sheet Plate Price , Find Complete Details about Building Material Stainless Steel Sheet Plate Price,Stainless Steel Sheet Price,Stainless Steel Plate Price,Stainless Steel Building Sheet from Stainless Steel Sheets Supplier or …

A240 SS317L,ASTM A240 317L (S31703) stainless steel plate ...

ASTM A240 317L (S31703) stainless steel plate Gangsteel is specialized in supplying ASTM A240 steel plate in A240 317L. Our BBN Steel have min 600Tons stock size for each size stainless steel. We also have cutting factory which could cut sta[PDF]

ATI 316™, ATI 316L™, ATI 317™, ATI 317L™

Actual data on any particular product or material may vary from those shown ... ATI 316™, ATI 316L™, ATI 317™ and ATI 317L™ stainless steels are available in the form of sheet, strip and plate to ASTM A240 ... and ATI 317L™ stainless steel product forms are assigned allowable stresses in Section II, Part D of the ASME Boiler and ...

317L - Marco Specialty Steel

317L Stainless Steel Products Offered Wire Cloth Perforated Metal Expanded Metal Bar Grating Principal Design Features: 317L is a low carbon version of 317 stainless. It possesses the same high strength and corrosion resistance and will produce stronger welds due to its low carbon content. Many users are shifting over to this alloy in lieu of […]

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.