Tel: +86-371-86151827

a709 grade hps50w steel plate exporter

Steel grade:a709 grade hps50w steel plate exporter

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a709 grade hps50w steel plate exporter Introduction

A709 Gr 50 | HPS 50W - ASTM A36 STEEL PLATES, A572 …

Chemtech is A709 Grade 36, A709 Gr 50, HPS 50W, HPS 70W , Steel plate, High Performance Steel plates stockist, suppliers and exporters in INDIA

ASTM A709 Grade HPS 50W & 70W | Leeco Steel, LLC

leecosteel› Steel Plate ProductsLeeco Steel offers ASTM A709 grade HPS steel plate is primarily used in the manufacture of bridges. We offer A709 steel plate in the grades HPS 50W & HPS 70W because they are higher performing grades for extreme climates. We offer various thicknesses, lengths, and widths to meet your specifications. Request a quote today!

ASTM A709 Grade HPS50W steel exporter - thehandler.nl

ASTM A709 Grade 50,A709 Gr.50 steel plate__Steel Supplier. A709 Grade HPS50W steel plate A709 Grade HPS50W steel grade is a high strength low alloy structural carbon steel used in building bridge projects. China steel supplier/exporter/factory. Forging astm astm a 709 gr50 - A36 steel …

A709 Gr.HPS50W - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A709 Gr.HPS50W can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

ASTM A709 Grade HPS50W steel sheet Specs - KATALOR STEEL

ASTM A709 Grade HPS50W steel sheet Specs Advantage: We promise we can offer you the qualified ASTM A709 Grade HPS50W steel sheet Specs at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many ASTM A709 Grade HPS50W steel sheet Specs stock in our warehouse, So hereby, we sincerely hope you join us, let's join hands to make you be the …

A709 Structural, Carbon & HSLA Steel Plate - BBN Steel

A high-strength, low-alloy structural steel plate utilized primarily in the manufacture of bridges. BBN Steel stocks A709 Grade 36, A709 Grade 50 and A709 Grade 50W. These grades are often specified with Charpy tests referencing the specific zone or lowest anticipated service temperature.

ASTM A709 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A709. The ASTM A709 is the Standard Specification for Structural Steel for Bridges and encompasses carbon, high-strength low-alloy, and quenched and tempered alloy steels used as structural plates in the construction of bridges. SSAB offers the following five grades of A709; 36, 50, 50W, HPS 50W and HPS 70W.

A709 Gr.50W - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A709 Gr.50W can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

A709 Gr 50 | HPS 50W - ASTM A36 STEEL PLATES, A572 STEEL …

Chemtech is A709 Grade 36, A709 Gr 50, HPS 50W, HPS 70W , Steel plate, High Performance Steel plates stockist, suppliers and exporters in INDIA

ASTM A709 Grade HPS50W steel exporter - thehandler.nl

ASTM A709 Grade 50,A709 Gr.50 steel plate__Steel Supplier. A709 Grade HPS50W steel plate A709 Grade HPS50W steel grade is a high strength low alloy structural carbon steel used in building bridge projects. China steel supplier/exporter/factory. Forging astm astm a 709 gr50 - A36 steel …[PDF]

Datasheet for Steel Grades Carbon Steel A709 …

Gr.HPS50W ,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application. Datasheet for Steel Grades Carbon Steel A709

A 709 Gr.50W steel plate steel plate,A 709 Gr.50W steel ...

A 709 Gr.50W Weathering Steel Description. ASTM A709 Grade 50W equal grade are EN10155 :S355K2G1W,NFA 35-502,E 36 WB 4 .A709 Grade 50W is the specification used for steel plate used in the manufacture of bridges. A 709 Gr50W Weathering Steel Delivery Conditions

ASTM A709 Grade 100 exporter - pressure vessel steel plate ...

ASTM A709 Grade HPS50W steel sheet Specs - KATALOR . ASTM A709 Grade HPS50W steel sheet Specs manufacturer in China ,we are professional ASTM A709 Grade HPS50W steel sheet Specs suppliers and distributor ,if you need ASTM A709 Grade HPS50W steel sheet Specs price and application ,please contact us. China steel supplier/exporter/factory.

ASTM A709-50W Corten Steel Plates & Sheets

Amardeep Steel Is One Of The Leading Exporter,Supplier,Stockist And Manufacturer Of ASTM A709-50W Corten Steel Plates & Sheets.Amardeep Steel Has Ready Stock Of ASTM A709-50W Corten Steel Plates & Sheets To Serve Your Requirements .We Offer Quickest Delivery Of ASTM A709-50W Corten Steel Plates & Sheets.At Lowest Price Without Any Compromise On Our Quality.

A709 Gr HPS100W|A709GrHPS100W steel plate__Steel …

Gangsteel supply ASTM A709 Gr 100,A709 Gr 100W,A709 Gr 36,A709 Gr 50,A709 Gr 50S,A709 Gr 50W,A709 Gr HPS50W,A709 Gr HPS70W,A709 Gr HPS100W steel plate

ASTM A709 Grade 50,A709 Gr.50 steel plate__Steel Supplier

Gangsteel is specialized in supplying ASTM A709 steel plate in A709 Grade 50. For more information of A709 Grade 50steel plates, please check them in following:. Chemical composition % of the Product analysis of A709 Grade 50

ASTM A709 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A709. The ASTM A709 is the Standard Specification for Structural Steel for Bridges and encompasses carbon, high-strength low-alloy, and quenched and tempered alloy steels used as structural plates in the construction of bridges. SSAB offers the following five grades of A709; 36, 50, 50W, HPS 50W and HPS 70W.

A709 Grade HPS 50W,A709GrHPS 50W - Mild steel plate ...

ASTM A 709/A 709M A709 Grade HPS 50W is a kind of weathering steel plate with Cr,Ni,Mo alloy when rolling.The low alloy steel plate A709GRHPS 50W shall have an atmospheric corrosion resistance index of 6.0 or higher calculated from the heat analysis in according to steel guide G 101-predictive method based on the date of larabee and Coburn.When properly exposed to the atmosphere,these ...

A709 Gr.HPS50W - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A709 Gr.HPS50W can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Corten Steel ASTM A709 50W Plates Supplier, Corten A709 ...

Corten Steel ASTM A709 50W Plates Manufacturer. Marc Steel is a well-known supplier and manufacturer of ASTM A709-50W Corten Steel Plates, which are factory-made by using best quality of steel in dissimilar diameters and wall thickness. ASTM A709 50W Plates These ASTM A709-50W Corten Steel Sheets are as well used in a number of automobile and mechanical industries that are …[PDF]

Plate - usa.arcelormittal

appears in A709-05. Separate ArcelorMittal USA plate brochures for both HPS 50W and HPS 100W are available on the ArcelorMittal USA website at arcelormittal. Specification Coverage ASTM A709/A709M-07 and more recent versions: Standard speci-fication for Structural Steel Plates for Bridges. AASHTO M270-07 has added all three HPS grades ...

ASTM A709 Grade 36 Chemical composition - Steel Plate…

Henan Join-Win Im/Ex Corp,main product steel plates, steel coil, steel pipe, hest resistant steel, forged solid round steel bar. service includes : produce Hydraulic machinery and parts, Mechanical parts processing, pressure working, Welding and bonding etc.Email:[email protected]

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.