Tel: +86-371-86151827

dc01 dc02 dc03 dc04 cold rolled steel sheet plate

Steel grade:dc01 dc02 dc03 dc04 cold rolled steel sheet plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

dc01 dc02 dc03 dc04 cold rolled steel sheet plate Introduction

Steel Sheet Dc01 Dc03 Dc04 Steel Sheet

Cold Rolled Steel Sheet (DC01) dc03 full hard cr cold rolled steel plate sheet – steelplate. Coil Cold Rolled Steel Dc04 Dc01 Dc03 Katalor keeps more than 10,000 tons dc03 full hard cr cold rolled steel plate sheet in stock each month. DC01 DC02 DC03 Cold Rolled Steel Coil for Auto Panel

price cold rolled steel sheet steel coil dc02

SPCC DC01 DC02 DC03 DC04 Cr CRC Cold Rolled Steel Sheet ... Corrosion Resistant Plate, Stainless Steel Coil, Stainless Steel Strip manufacturer / supplier in China, offering SPCC DC01 DC02 DC03 DC04 Cr CRC Cold Rolled Steel Sheet Plate Coil, High Quality Manufacture Price Seamless Pipe Steel Sch80 ASTM A106 Steel Pipe, ASTM A312 304/321/316L Stainless Steel Seamless Pipes and …

Cold Rolled Steel Coil 0.1-3mm Thickness SPCC DC01 DC02 ...

Cold Rolled Steel Coil 0.1-3mm Thickness SPCC DC01 DC02 DC03 DC04 ST12 Q195 . Description: Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling.

DC01 cold rolled steel --- BEBON galvanized steel ...

DC01 is the cold steel plates under the standard of GB/T 5213-2001 Cold rolled low carbon steel and strip. Cold rolled steel sheet is short for ordinary carbon structural steel manufacture, also known as manufacture, commonly known as the cold plate. It has good performance, manufacture surfaces is clean and bright.

Dc04 Cold Rolled Steel Sheet, Dc04 Cold Rolled Steel Sheet ...

Alibaba offers 1,286 dc04 cold rolled steel sheet products. About 94% of these are steel sheets, 1% are stainless steel sheets. A wide variety of dc04 cold rolled steel sheet options are available to you, such as coil, plate.

Dc01 Steel Sheet, Dc01 Steel Sheet Suppliers and ...

SS400 SPCC ST12 DC01 DC02 cold rolled steel sheet in coil with ASTM JIS standard for automobile manufacturing in stock Standard: ASTM,JIS,DIN,AISI,BS,GB Material Grade: Q195,Q215,Q235,SPCC,SPCD,SPCE,SGCC,SGCH,DC01,DC03,DC04,DC05 etc. Coil diameter 508-610mm Coil weight 3.5-5tons Application Used in automobile manufacturing, machinery …[PDF]

Cold Rolled Steel Sheet for Drawing and Forming EN …

Cold rolled steel sheet for drawing and forming applications is produced in a broad spectrum of grades ... EN 10130 DC04 0,08 0,40 0,025 0,025 0,025 0,020 EN 10130 DC01 0,12 0,60 0,045 0,045 0,030 0,020 Data sheet: B3.1 Cold Rolled Steel Sheet for Drawing and Forming ...

DC01 / 1.0330 Non-alloy quality steel - equivalent ...

Non-alloy quality steel Chemical composition of steel DC01 (1.0330), Standards of steel DC01 (1.0330) Mechanical Properties of steel DC01 (1.0330) Equivalent grades of steel DC01 (1.0330) Tensile Strength, Elongation, Proof strength, Hardness

SPCD Cold Rolled Steel Coil Sheet , Building Metals Steel ...

SPCD Cold Rolled Steel Coil Sheet , Building Metals Steel Sheet Coil DC01 DC02 DC03 . Description: Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling.

DC01 cold rolled steel --- BEBON galvanized steel ...

DC01 is the cold steel plates under the standard of GB/T 5213-2001 Cold rolled low carbon steel and strip. Cold rolled steel sheet is short for ordinary carbon structural steel manufacture, also known as manufacture, commonly known as the cold plate. It has good performance, manufacture surfaces is clean and bright.

China Cold Rolled DC01 DC02 Steel Plate - China Stainless ...

China Cold Rolled DC01 DC02 Steel Plate, Find details about China Stainless Steel, Color Coated Steel Coil from Cold Rolled DC01 DC02 Steel Plate - Shanghai Changzeng Metal Co., Ltd.

DC04 cold rolled steel coil sheet strip - cafethuys.nl

Dc04 Cold Rolled Steel, Dc04 Cold Rolled Steel Suppliers ... Dc01 Dc02 Dc03 Dc04 Cr Cold Rolled Steel cold rolled steel coil usage and features. cold rolled steel coil comes from hot rolled steel coil through pickle and anneal procession, the outlook and properties is much better than hot rolled steel coil. cold rolled steel coil Product name cold rolled steel sheet coil Material SPCC, SPCD ...

Carbon Steel Coil Sheet , Cold Rolled Sheet Metal Coil ...

Hot Rolled Plate Steel. Carbon Hot Rolled Plate Steel Thickness 6mm - 300mm ASTM JIS EN Standard. ASTM A36 Hot Rolled Steel Sheet , Custom Size A283 Grade Hot Rolled Steel Plate. JIS G 3101 SS400 Hot Rolled Plate Steel 6000mm - 24550mm Length Optional. EN 10025-2 S235JR Hot Rolled Sheet Steel , 6000 - 24950mm Hot Rolled Carbon Steel

DC02 cold rolled steel coil sheet strip - w3s.in

Corrosion Resistant Plate, Stainless Steel Coil, Stainless Steel Strip manufacturer / supplier in China, offering SPCC DC01 DC02 DC03 DC04 Cr CRC Cold Rolled Steel Sheet Plate Coil, High Quality Manufacture Price Seamless Pipe Steel Sch80 ASTM A106 Steel Pipe, ASTM A312 304/321/316L Stainless Steel Seamless Pipes and so on. Learn more

[Hot Item] DC01 DC02 DC03 DC04 Cold Rolled Steel Coils

Cr Steel Coils, CRC Steel Coils, Mild Cr Coils manufacturer / supplier in China, offering DC01 DC02 DC03 DC04 Cold Rolled Steel Coils, ASTM A516 Gr70 Building Material Boiler Steel Plate/Boiler Steel Plate, Color Roof Tile/PPGI Roof Sheet/Prepainted Corrugated Steel Roofing Sheet and so on.

Mild Steel Strip, DC01, DC04, DC03, Cold Rolled Uncoated ...

Mild Steel Strip, DC01, DC04, DC03, Cold Rolled Uncoated Mild Steel. ... These can be supplied in thickness’s of between 0.10mm and 7.00mm, and widths of between 4.00mm and 650mm Cold-rolled mild steel coils for forming and deep drawing are available in a range of qualities, each designed for particular applications.

DC01 / 1.0330 Non-alloy quality steel - equivalent ...

Non-alloy quality steel Chemical composition of steel DC01 (1.0330), Standards of steel DC01 (1.0330) Mechanical Properties of steel DC01 (1.0330) Equivalent grades of steel DC01 (1.0330) Tensile Strength, Elongation, Proof strength, Hardness

supplier of Dc04 steel sheet,A36,Q235B,Q345B steel plate ...

SPCD Cold Rolled Steel Coil Sheet , Building Metals Steel Sheet Coil DC01 DC02 DC03 . Description: Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling.

Spcc Dc01 Properties Cold Rolled Steel Plate

SPCC Cold rolled steel sheet / DC01 steel plate for building China SPCC, Spcd, DC01, DC03 Cold Rolled Steel Plate wefsun.en.made-in-china› Product› steel . Cold Rolled Steel Sheet / Plate SPCC ST12 DC01 . Shop online for the cold rolled steel sheet / plate SPCC ST12 DC01 with competitive price from our factory. We are one of the most ...

China Cr Steel Sheet (DC01 DC02 DC03 DC04) - Tianjin …

DC01 Steel Sheet, DC02 Steel Sheet, DC03 Steel Sheet manufacturer / supplier in China, offering Cr Steel Sheet (DC01 DC02 DC03 DC04), 0.39mm 0.4mm 0.41mm 0.42mm 0.43mm 0.44mm 99.994% Pure Lead Foil for Laboratory, 99.994% Pure Lead Foil for Laboratory and so on.

316 0.4mm stainless steel sheet dc01 dc03

cold rolled stainless steel sheet - Welded Steel Pipes. custom Cut DC01, DC02, DC03, DC04, SAE 1006, SAE 1008 Cold Rolled Steel Thin 304 304L 430 Cold Rolled Stainless Steel Plate / Sheet ASTM AISI SUS EN SUS JIS EN DIN BS GB Cold Rolled Stainless Steel Sheet 316L stainless series Standard: JIS, AISI, ASTM,GB,DIN,EN Thickness: 0.4mm-50mm Width:

Dc04 steelsheet - pressure-vessel-steel

Dc04 steelsheet. Mild Steel Strip, DC01, DC04, DC03, Cold Rolled … Mild Steel Strip and Mild Steel Coils are low carbon variants with carbon levels of up to 0.12% as defined in BS 1449: part 1 1991, with such grades as CS1, CS2, CS3 and CS4.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.