Tel: +86-371-86151827

304l stainless steel plate en 1 4306 made

Steel grade:304l stainless steel plate en 1 4306 made

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

304l stainless steel plate en 1 4306 made Introduction

Steel grade 304/ 304L and 1.4301/ 1.4306/ 1.4307 ...

Steel grade 304/ 304L and 1.4301/ 1.4306/ 1.4307. Non-magnetic but become slightly magnetic when cold worked Grade AISI 304L or EN 1.4306 and 1.4307 Type 304L is a very low Carbon stainless steel with general corrosion resistance similar to T304 but with superior resistance to intergranular corrosion following welding or stress relieving.

Core 304L/4306 EN 1.4306, ASTM TYPE 304L stainless steel ...

General characteristics. Core 304L/4306 is an austenitic stainless steel that belongs to the standard CrNi stainless steel family. Core 304L/4306 has the variant with 10.5 wt.% nickel for improved formability and low carbon content for improved resistance against intergranular corrosion after welding.

Stainless Steel EN 1.4306 AISI 304L X2CrNi19-11 UNS S30403

Description : 1.4306 / AISI 304 L is an austenitic chromium-nickel stainless steel with a low carbon content. Special properties : 1.4306 is essentially a more highly alloyed version of 1.4307. Due to the slightly higher chromium and notably higher nickel content, 1.4306 is more corrosion resistant than 1.4307.

304L En1.4306 Stainless Steel Sheet - tjtgwy.en.made-in ...

304l Stainless Steel Plate, 304l Stainless Steel Sheet, 1.4306 Stainless Steel Plate manufacturer / supplier in China, offering 304L En1.4306 Stainless Steel Sheet, Brass Strip/ Bronze Strip, ASTM Brass Tube / Brass Pipe and so on.

AISI SS 304 / 304L S30400 / S30403 1.4304 / 1.4306 | Stardust

SS 304 / SS 304L. SS 304 is considered the basic stainless steel alloy, composed of 18% chromium and 8% nickel. These components also give cause for 304 to be referred to as “18/8”. The remainder of its composition is made up of carbon, manganese, silicon and …

X2CrNi1810 Sheets, Stainless Steel X2CrNi1810 Plates ...

Jayesh Metal Corporation is One of the Reputed Supplier and Exporter of X2CrNi1810 plates, UNS S30403 Sheets, X2CrNi1810 SS Plate, DIN 1.4306 Steel Cold Rolled Sheets, Stainless Steel 1.4306 Plates, AISI 304L Sheet, SS X2CrNi1810 HR Plates, SS X2CrNi1810 CR Sheets, EN X2CrNi1810 Plate, EN X2CrNi1810 sheets and plates in Mumbai, India.

AISI 304L (S30403) Stainless Steel :: MakeItFrom

AISI 304L (S30403) Stainless Steel. The graph bars on the material properties cards further below compare AISI 304L stainless steel to: wrought austenitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Stainless Steel EN 1.4307 AISI 304L X2CrNi18-9 UNS S30403

Reliable is a Stockist Supplier and Distributor of Stainless Steel EN 1.4307 AISI 304L Pipes, Plates, Sheets, Tubes, Fittings & Flanges

1.4306 Stainless Steel Bar - tjtgwy.en.made-in-china

304l Stainless Steel Bar, 1.4306 Stainless Steel Bar, Sus304l Stainless Steel Bar manufacturer / supplier in China, offering 1.4306 Stainless Steel Bar, ASTM A192/A179/A178/A210 Seamless Steel Pipe / Bolier Pipe, ASTM B265 Gr1, Gr2 Titanium Sheet / ASTM B265 Gr1, Gr2, Gr3 Titanium Plate …

China En 1.4306 3mm Stainless Steel Plate Shanghai - China ...

Stainless Steel Sheet 1.4306, Stainless Steel Plate 1.4306, 1.4306 Stainless Steel Sheet manufacturer / supplier in China, offering En 1.4306 3mm Stainless Steel Plate Shanghai, Stainless Steel Checkered Plate (304 316L 410S 420 420J1 420J2), Stainless Steel Checkered Plate Stock Price (304 SUS304 316 316L) and so on.

China 304/304L Stainless Steel (1.4301/1.4307) Data Sheet ...

China 304/304L Stainless Steel (1.4301/1.4307) Data Sheet, Find details about China Stainless Steel, Stainless Stee Plate from 304/304L Stainless Steel (1.4301/1.4307) Data Sheet - Xi′an Xinyifeng Steel …

Stainless Steel EN 1.4306 AISI 304L X2CrNi19-11 UNS S30403

Description : 1.4306 / AISI 304 L is an austenitic chromium-nickel stainless steel with a low carbon content. Special properties : 1.4306 is essentially a more highly alloyed version of 1.4307. Due to the slightly higher chromium and notably higher nickel content, 1.4306 is more corrosion resistant than 1…

AISI 304L (S30403) Stainless Steel :: MakeItFrom

AISI 304L (S30403) Stainless Steel. The graph bars on the material properties cards further below compare AISI 304L stainless steel to: wrought austenitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Stainless Steel EN 1.4307 AISI 304L X2CrNi18-9 UNS S30403

Reliable is a Stockist Supplier and Distributor of Stainless Steel EN 1.4307 AISI 304L Pipes, Plates, Sheets, Tubes, Fittings & Flanges

304L Stainless Steel Alloy Data Sheet | CMC - Bellwood

UNS: S30403 EN-DIN: 1.4306. Printable PDF: 304L Stainless Steel Alloy Data sheet Industries supplied include: Process equipment in mining, chemical, cryogenic, food, dairy, and pharmaceutical industries. 304 grade stainless has excellent welding and formability characteristics and is one of the most utilized stainless steels. 304L is an extra low carbon grade with a 0.03% max carbon content ...

China 304/304L Stainless Steel (1.4301/1.4307) Data Sheet ...

China 304/304L Stainless Steel (1.4301/1.4307) Data Sheet, Find details about China Stainless Steel, Stainless Stee Plate from 304/304L Stainless Steel (1.4301/1.4307) Data Sheet - Xi′an Xinyifeng Steel …

X2CrNi19-11 / 1.4306 Austenitic stainless steel ...

Chemical composition % of steel X2CrNi19-11 (1.4306): EN 10088-2-2005 Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted.

What’s the Difference Between Grade 304 and 304L Stainless ...

Each of these unique formulations of stainless steel offer some degree of corrosion resistance above and beyond that of plain steel. The existence of these stainless steel variants can cause some confusion—especially when the names & formulations of two stainless steel alloys are almost the same. This is the case with grade 304 and 304L ...

China 304L Stainless Steel Sheet for Interior Decoration ...

Stainless Steel Sheet, Stainless Steel Plate, Color Stainless Steel Sheet manufacturer / supplier in China, offering 304L Stainless Steel Sheet for Interior Decoration, Alloy Construction Steel Bar in 4135 4140 34CrMo4 42CrMo4 with Good Quality, 6063 6060 …

Core 304L/4307 EN 1.4307, ASTM TYPE 304L / UNS S30403 ...

Core 304L/4307 is an austenitic stainless steel that belongs to the standard CrNi stainless steel family. The austenitic CrNi standard grades are the most widely used group of stainless steels. Their well-balanced material properties make them suitable for the fabrication of many products.

Stainless Steel ALLOY 304/304L – UNS S30400 / S304033 ...

Alloy 304L a T-300 series stainless steel austenitic, which has a minimum of 18% chromium and 8% nickel. Type 304L has a carbon maximum is 0.030. It is the standard “18/8 stainless” that is commonly found in pans and cooking tools. Alloys 304L is the most versatile and widely used alloy in the stainless steel …

1.4306 Steel Sheet Plate, 1.4306 Steel Sheet Plate ...

Alibaba offers 91 1.4306 steel sheet plate products. About 90% of these are stainless steel sheets. A wide variety of 1.4306 steel sheet plate options are available to …

Top SS 304/304L Sheets & Plates Suppliers, S30400/S30403,1 ...

steelplates.in› …› Stainless Steel 304/304LQuality 304/304L Stainless Steel Sheet Suppliers & Exporters – Metline is a specialized supplier of 304 stainless steel sheets and plates in various surface finishes such as No.1, 2B Polish, 8K Mirror and Matte Finish. We are also one of the biggest service center and supplier of Jindal or Imported SS 304 sheets and plates.

Alloy 304/304L Austenitic Stainless Steel Plate ...

Alloy 304/304L (UNS S30400/S30403) is the most widely utilized “18-8” chromium-nickel austenitic stainless steel. It is an economical and versatile corrosion resistant alloy suitable for a wide range of general purpose applications.

China En 1.4306 (304L) Stainless Steel Seamless Pipe ...

Stainless Steel, En 1.4306 Stainless Steel, 304L Stainless Steel manufacturer / supplier in China, offering En 1.4306 (304L) Stainless Steel Seamless Pipe, Stainless Steel Seamless Pipe (round, square, rectangular, profiled), Bevelled End Stainless Steel Seamless Pipe and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.