Tel: +86-371-86151827

mill price hsla steel plate with st44 3

Steel grade:mill price hsla steel plate with st44 3

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

mill price hsla steel plate with st44 3 Introduction

St44-3,St44-3 STEEL,St44-3 PLATE

St44-3 structural steel plate is a kind steel grade in steel specification DIN 17100.For the different thickness of steel plate St44-3,there is a little difference in the minimum yield strength and tensile strength values.Tensile strength shall be within 430 up to 580 Mpa for the thickness belows 3mm,and tensile strength of steel plate St44-3 ...

DIN 17100 St37 3 steel mill - pressure vessel steel plate ...

Bebon steel can supply DIN 17100 St44-3 Carbon structural steel plate, St44-3 steel sheet Surface Treatment price and specification ,we are steel suppliers and manufacturer,you can contact us to get DIN 17100 St44-3 Carbon structural steel plate, St44-3 steel . St37.3 steel plate,Din 17100 St37-3--Xin Steel …

SA573 Grade 65 mill - pressure vessel steel plate grades

Mill price hsla steel plate with St44 3. ja.steel-grade-plate. Translate this pageasme sa573 グレード 70 (sa573gr70) 炭素及び低合金高張力鋼板 ar ニュースレター 今すぐ登録、毎月の貴重な情報が表示されます。 ASME SA516/SA516M SA516 Grade 55 SA516 Grade 60 SA516 Grade 65 SA56 Grade

Steel St44 Wholesale, Steel Suppliers - Alibaba

Alibaba offers 732 steel st44 products. About 65% of these are steel pipes, 28% are steel sheets, and 2% are steel h-beams. A wide variety of steel st44 options are available to …

St60 2 High Strength Low Alloy Steel Plate - rdblegend.co.in

DIN 17100 St60-2,St60 2 structural steel plate--Xin Steel . High strength low alloy steel plate St60-2 owned the minimum yield point shall be above 335 Mpa for the thickness equal or above 16mm,and tensile strength shall be within 590-770 Mpa Normlized St60-2 is mainly for heavy steel plate for improve the steel property when rolling Under steel standard Din 17100,there are different steel grades

15mnv Alloy Steel Plate - pond-pro

S275nl Alloy Steel Plate sheet China SupplierKatalor is a professional A572 Gr50 A709 A633D St52 S355JO S355JR S275NL 16Mn 15MnV low alloy steel plate/sheet supplier in China. Alloy Steel Plate - steels-supplier. 16 mn is a major steel grade of high strength low alloy steel plate in most industries, The consumption of this type is very large.

st44 steel - w3s.in

St44-3,St44-3 STEEL,St44-3 PLATE. St44-3 structural steel plate is a kind steel grade in steel specification DIN 17100.For the different thickness of steel plate St44-3,there is a little difference in the minimum yield strength and tensile strength values.Tensile strength shall be within 430 up to 580 Mpa for the thickness belows 3mm,and ...[PDF]

Products & Prices - usa.arcelormittal

Effective 2/27/2011 Revised 12/31/2010 ArcelorMittal USA (Plate Products) Products & Prices USA Plate Products EFFECTIVE 11/9/15

st44-2 steel plate - BEBON INTERNATIONAL

st44-2 steel plate, DIN 17100 st44-2 steel plate is a kind of Low alloy high strength steel plate. DIN 17100 st44-2 steel plate is characterised by a minimum yield strength of 265-275MPa and tensile strength of 410-580MPa,so st44-2 steel is mainly used in riveted, bolted, or welded construction of bridges and buildings.The followings are DIN ...

Buy High Strength Low Alloy Plate From Top Steel Supplier ...

16 mn is a major steel grade of high strength low alloy steel plate in most industries, The consumption of this type is very large. Its intensity is higher than the ordinary carbon structural steel Q235 by 20% ~ 30%, atmospheric corrosion resistance by 20% ~ 38%. 15 MNVN is mainly used as medium strength steel plate. It is featured with high ...

ST44 plate steel - carbon-steeltube

St44-3 structural steel plate is a kind steel grade in steel specification DIN 17100.Current Xinsteel roll low alloy steel plate St44-3 in the below range,thickness shall be within 2-650mm,width shall be within 1200-4100mm and length shall be within 5000-16000mm.For the different thickness of steel plate St44-3,there is a little difference in ...

DIN 17100 St37 3 steel mill - pressure vessel steel plate ...

Bebon steel can supply DIN 17100 St44-3 Carbon structural steel plate, St44-3 steel sheet Surface Treatment price and specification ,we are steel suppliers and manufacturer,you can contact us to get DIN 17100 St44-3 Carbon structural steel plate, St44-3 steel . St37.3 steel plate,Din 17100 St37-3--Xin Steel …

SA709 Grade 50 steel plate mill - pressure vessel steel ...

Give You Our Best Carbon Steel Plate SA709 Gr 50S low . St44-3 structural steel plate is a kind steel grade in steel specification DIN 17100.Current BBN Steel roll low alloy steel plate St44-3 in the below range. heavy plate, Which is a large steel plate supplier mill at BBN Steel Group. ASME SA709 Grade 50/SA709 Gr.50 steel plates - BBN Steel[PDF]

High-Strength Low-Alloy Steels - ASM International

High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are ... The chemical composition of a specific HSLA steel may vary for ... The HSLA steels in sheet or plate form have low carbon content (0.05 to −0.25% C) in order to produce adequate formability and weldability, and

ST44 plate steel - carbon-steeltube

St44-3 structural steel plate is a kind steel grade in steel specification DIN 17100.Current Xinsteel roll low alloy steel plate St44-3 in the below range,thickness shall be within 2-650mm,width shall be within 1200-4100mm and length shall be within 5000-16000mm.For the different thickness of steel plate St44-3,there is a little difference in ...

st44 steel - w3s.in

St44-3,St44-3 STEEL,St44-3 PLATE. St44-3 structural steel plate is a kind steel grade in steel specification DIN 17100.For the different thickness of steel plate St44-3,there is a little difference in the minimum yield strength and tensile strength values.Tensile strength shall be within 430 up to 580 Mpa for the thickness belows 3mm,and ...

DIN ST44-3N,ST52-3,ST52-3N Low Alloy Steel(id:5123915 ...

DIN ST44-3N,ST52-3,ST52-3N Low Alloy Steel(id:5123915). View product details of DIN ST44-3N,ST52-3,ST52-3N Low Alloy Steel from Henan Bebon International Co.,Ltd manufacturer in EC21

high strength carbon steel plate - w3s.in

High Strength Low Alloy Steel Plate - INFRA-METALSThe atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon steels with or without copper addition. ASTM A514 – Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding.

HSLA Steel Sheet - stainless steel, steel plate for ...

Low alloy steel (HSLA) is referred to alloy elements less than 3.5% of the total. Relative to carbon steel, low alloy steel, on the basis of carbon steel in order to improve one or more performances of steel is added one or several alloy steel elements. The alloy is more than carbon steel during normal production methods, which is called alloy ...

St60 2 High Strength Low Alloy Steel Plate - rdblegend.co.in

DIN 17100 St60-2,St60 2 structural steel plate--Xin Steel . High strength low alloy steel plate St60-2 owned the minimum yield point shall be above 335 Mpa for the thickness equal or above 16mm,and tensile strength shall be within 590-770 Mpa Normlized St60-2 is mainly for heavy steel plate for improve the steel property when rolling Under steel standard Din 17100,there are different steel grades

ASTM A36 Steel Plate - A36 Carbon Steel Plate | Leeco ...

leecosteel› Steel Plate ProductsLeeco Steel distributes ASTM A36 steel plate, which is one of the most widely used carbon structural steels used in the industry. A36 carbon steel plate can be riveted, bolted, or welded in the construction of bridges and buildings, and for general structural purposes. We offer various thicknesses, lengths, and widths to meet your specifications.

st44-2 steel plate - BEBON INTERNATIONAL

st44-2 steel plate, DIN 17100 st44-2 steel plate is a kind of Low alloy high strength steel plate. DIN 17100 st44-2 steel plate is characterised by a minimum yield strength of 265-275MPa and tensile strength of 410-580MPa,so st44-2 steel is mainly used in riveted, bolted, or welded construction of bridges and buildings.The followings are DIN ...

15mnv Alloy Steel Plate - pond-pro

S275nl Alloy Steel Plate sheet China SupplierKatalor is a professional A572 Gr50 A709 A633D St52 S355JO S355JR S275NL 16Mn 15MnV low alloy steel plate/sheet supplier in China. Alloy Steel Plate - steels-supplier. 16 mn is a major steel grade of high strength low alloy steel plate in most industries, The consumption of this type is very large.

Fe430b High Strength Low Alloy Steel Plate - cafethuys.nl

ASTM A588 Structural Steel Plate (Grades A/B) High-Strength Low-Alloy Steel Plate 3/16 inch through 4 inch thickness in up to 120 inch widths and 480 inch lengths. . ASTM A572 Structural Steel Plate (Grades 50/60) High-Strength Low-Alloy Columbium-Vanadium Steel Plate 3/16 inch through 4 inch thickness in up to 120 inch widths and 480 inch lengths.

Hsla Steel, Hsla Steel Suppliers and Manufacturers at ...

ASTM A572 HSLA High Strength Low Alloy Steel Plate thickness 3.0mm-200mm Width 1000mm-3000mm Lengt specifications sale in order h 6000mm above Type Steel plate Technique Hold Rolled Surface Treatment Bare, galvanized or painted to be protected from rust Standards GB, ASTM, DIN, JIS AISI Grades 12Cr1MoV, 15CrMo, 20Cr, 40Cr, 50Mn2V, 30CrMo Application Boiler Plate MOQ 10 Ton …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.