Tel: +86-371-86151827

cold rolled 2b 310 stainless steel plate

Steel grade:cold rolled 2b 310 stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled 2b 310 stainless steel plate Introduction

[PDF]

Stainless Steel Sheet, Coil and Plate - Atlas Steels Australia

General requirements for flat rolled stainless and heat-resisting steel plate, sheet and ... 2B The general-purpose, cold rolled, smooth finish obtained as a result of a final light ... Stainless Steel Sheet, Coil and Plate October 2016 Page 7 – Section 2 atlassteels.au Stainless Steel Chequer (Floor) Plate ...

Manufacturers Of ASTM A240 310 Stainless Steel Plate | SS ...

» cold rolled 2b 0.8mm sus 310 stainless steel plate US $1850-1980 / Kilogram; 310 Stainless Steel Plate Packaging . Please don’t worry that our products are packed, stored, transported according to the international regulation.

2D Vs 2B Stainless Steel

SSINA: Stainless Steel: Finishes. 1 Finish is produced by rolling stainless steel that has been heated prior to 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls.

SS 310 Plate suppliers | SA240 gr310 | A240 TP310 | SS 310 ...

Largest selection of 310 Stainless Steel Plate at wholesale prices in 2B and #4 brushed finish. Any Quantity, Any Size of 310 Stainless plate, SS 310 2B Plate, SS 310 Diamond Plate, SS 310 Checker Plate, SS 310 Hot Rolled Plate, SS 310 Cold Rolled Plate, Stainless Steel 310 Tread Plate, Stainless Steel 310 Clad Plate at best price in India.

Quality Stainless Steel Sheet & Stainless Steel Plates ...

Stainless Steel Sheet. 4X8 304 Stainless Steel Sheet Metal Bright Annealed Customized. ASTM A240 304L Cold Reduced Steel Sheet Metal Stainless Steel 2B. Cold Rolled 304 2B Stainless Steel Sheets 4X8 , Thick Stainless Steel Plate. ASTM A240 316 Cold Rolled Stainless Steel Sheet 0.5 mm Corrosion Resistant. Request A Quote

316/316L cold rolled stainless steel sheet - tm-steel

316/316L cold rolled stainless steel sheet TIME:2017-08-15. Product Introduction: 316/316L stainless steel. 316 316L steel is following the 304 stainless steel after the second most widely used. The only difference between them is the carbon content. This leads to a little difference between the two, but the overall use is the same.

310 Stainless Steel UNS S31000 | Ulbrich

Type 310 stainless is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000 °F. Learn more here about its applications and properties. ... 310 Stainless Steel UNS S31000 Download Datasheet. ... #BA- Bright annealed cold rolled and bright annealed #CBA- Course bright annealed cold ...[PDF]

Stainless Steel Sheet & Plate

Stainless Steel Sheet, also commonly known as Cold Rolled Sheet, is available in the following finishes: 2B, No.4 with PVC and BA with PVC. Sheets are also available paper interleaved and can be polished or embossed to your requirements. See Stainless Steel decorative finishes. Stainless Steel plate, also referred to as hot rolled plate is also ...

Extensive Stock: Stainless Steel Plate -- Stainless Steel ...

Stainless Steel Plate & Stainless Steel Sheet. Penn Stainless Products maintains an extensive inventory of stainless steel flat rolled products, including stainless steel plate, diamond plate, 2B & 2D stainless steel sheet, stainless steel polished sheet, stainless steel flat & expanded sheet, and perforated stainless steel sheet.. Penn Stainless offers over 24 different grades in stainless ...

2D Vs 2B Stainless Steel

SSINA: Stainless Steel: Finishes. 1 Finish is produced by rolling stainless steel that has been heated prior to 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls.

310/310S hot rolled stainless steel plate - tm-steel

310/310S hot rolled stainless steel plate TIME:2017-08-17. Product Introduction: 310/310S stainless steel. 310 stainless steel austenitic chromium nickel stainless steel has good oxidation resistance, corrosion resistance, because the higher percentage of chromium and nickel, 310 has much better creep strength, can continuously work under high temperature, good heat resistance.

310 Stainless Steel UNS S31000 | Ulbrich

Type 310 stainless is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000 °F. Learn more here about its applications and properties. ... 310 Stainless Steel UNS S31000 Download Datasheet. ... #BA- Bright annealed cold rolled and bright annealed #CBA- Course bright annealed cold ...

China 310S 2b Cold Rolled Stainless Steel Sheet with High ...

Steel, Stainless Steel Sheet, Steel Coil manufacturer / supplier in China, offering 310S 2b Cold Rolled Stainless Steel Sheet with High Quality, 304 / 304L Cold Rolled Stainless Steel Sheet 0.3-120mm Thickness, Stainless Steel Plate (409L) with High Quality and so on.

Manufacturers Of ASTM A240 Stainless Steel 310 Sheet | SS ...

310 Stainless Steel Sheet Price » SS 310 sheet cold rolled 2B finish stainless steel sheet price per kg US $2000-2800 / Ton » 2B finish 310 stainless steel sheet price per kg US $1000-3000 / Ton » astm a240 310 stainless steel plate sheet US $4000-4500 / Ton » 310 Fantastic Quality stainless steel sheet/plate US $800-3000 / Ton » Checkered GB/T Standard Cold rolling 310 grade stainless ...

Ss 310 Plate | Chhajed Steel & Alloys

Any Quantity, Any Size of 310 Stainless plate, SS 310 2B Plate, SS 310 Diamond Plate, SS 310 Checker Plate, SS 310 Hot Rolled Plate, SS 310 Cold Rolled Plate, Stainless Steel 310 Tread Plate, Stainless Steel 310 Clad Plate, most perfect circumstance cost in India. Distributer of EN 1.4840 Stainless Steel Plate, Stainless Steel 310 Plates ...

Good Quality Cold Rolled Stainless Steel Coils & Hot ...

Haozeshun Steel Trade Co.,Ltd is a supplier and exporter of Cold Rolled Stainless Steel Coils, Hot Rolled Stainless Steel Coil and 304 Stainless Steel Coil - a company has good quality products & service from China.

310 Hot Rolled Stainless Steel Sheet Wholesale, Sheet ...

A wide variety of 310 hot rolled stainless steel sheet options are available to you, such as astm, aisi, and jis. You can also choose from coil, plate, and flat. As well as from iso, bv, and sgs. And whether 310 hot rolled stainless steel sheet is cold rolled, hot rolled, or perforated.[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades

China ASTM Cold Rolled 4X8 2b Surface Stainless Steel ...

Steel Plate, Roofing Sheet, Stainless Steel manufacturer / supplier in China, offering ASTM Cold Rolled 4X8 2b Surface Stainless Steel Sheet, Monel 400 Forged Rods, Nickel Copper Alloy Tube / Pipe, 304 304L 316 316L 310 410 430 Stainless Steel Sheet/Plate/Coil/Roll 0.1mm~50mm and so on.

Stainless Steel 2B & 2D Sheet - Penn Stainless Products

Stainless Steel 2B & 2D Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet. Besides standard 304, 304/L and 316/L, aerospace stainless grades such as 321, 347, 17-4Ph and 17-7Ph are stocked. High temperature stainless grades such as 309/S and 310/S are readily available. Need tempered sheet?

Home [krdtsteel]

About 310/310S stainless steel . 310 stainless steel austenitic chromium nickel stainless steel has good oxidation resistance, corrosion resistance, because the higher percentage of chromium and nickel, 310 has much better creep strength, can continuously …

310 Stainless Steel Sheet Suppliers | ASTM A240 Type 310 ...

Largest selection of 310 Stainless Steel Sheet at wholesale prices in 2B and #4 brushed finish. Any Quantity, Any Size of 310 Stainless Sheet, SS 310 Strips, SS 310 Coil, SS 310 Foil, SS 310 Hot Rolled Sheet, SS 310 Cold Rolled Sheet, Stainless Steel 310 Shim Sheet, Stainless Steel 310 Perforated Sheet at best price in India.

310 Stainless Steel Sheet Suppliers| ASTM A240 grade 310 ...

Supplier, distributor of 310 Stainless Steel Sheet, ASTM A240 Type 310 Stainless Steel Sheets, Polished Stainless Steel 310 Sheet, SS 310 Sheet Price Per kg in India ... Stainless Steel Sheets Type 310, No. 2B Finish - Cold Rolled, Annealed *No 2D Finish, No. 3 Finish - Polished One Side, No. 4 Finish - Polished One Side .

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.