Tel: +86-371-86151827

sa514 gr q steel plate chemical composition

Steel grade:sa514 gr q steel plate chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sa514 gr q steel plate chemical composition Introduction

ASME SA514 Gr T Chemical composition - pressure vessel ...

ASME SA514 Gr.B Plate, ASTM A514 T-1 steel, ASTM A514 . Carbon Steel ASME SA514 GR.B Tempered Steel Plates is roughly three times stronger than plain carbon steel.Grade B, Grade S and Grade E are by far the most common, however, we have other grades available.Each grade is limited to a range of thicknesses.

ASME SA514 Gr P steel Chemical composition - pressure ...

ASME SA514 Gr Q steel plate Chemical composition. ASME SA517/SA517M high tensile alloy steel plates for pressure vessels. ASME SA517 in the standard SA517/SA517M is a kind of high tensile alloy steel plates material used to fabric high temperature pressure vessels.

A514 Grade Q|A514 Gr.Q|A514GrQ STEEL PLATE__Steel …

A514 Grade Q|A514 Gr.Q|A514GrQ STEEL PLATE ASME SA514 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service ASME SA514 grade Q plates shall be normalized.

ASTM A514 Grade Q|A514 Gr.Q STEEL PLATE__Steel Supplier

Length: 3000mm to 15000mm. Gangsteel is specialized in supplying ASTM A514 steel plate in A514 grade Q. For more information of A514 grade Q steel plates, please check them in following: A514 Grade Q Chemical Composition.

ASTM A514 Steel Plate - Grade B, E, F, H, Q, S | Leeco ...

leecosteel› …› Alloy Quenched & Tempered (Q&T) Steel PlateA514 Steel Plate. ASTM A514 plate steel has a min-yield strength of 100 ksi/690 MPa. It’s most commonly used as a structural steel in building construction, for cranes, or other large machines supporting high loads. A514 is used where a weldable, machinable, very high strength steel is required to save weight or meet ultimate strength requirements.

supplier of SA514 Grade Q,A36,Q235B,Q345B steel plate ...

SA514 Grade Q steel plate,SA514 Grade Q steel sheet - … SA514 Grade Q is a high-strength quenched and tempered alloy steel plate under ASME standard. ASME SA514 Grade Q steel plate/sheet is mainly used for welding bridge and other structures with thickness less than or equal to 6in.

A514 Grade Q,ASTM ,A514 Grade Q steel plate …

Adopt Standard: ASTM A517 . steel grade: A514 GRA,A514 GRB,A514 GRC,A514 GRE,A514 GRF,A514 GRH,A514 GRJ,A514 GRK,A514 GRM,A514 GRP,A514 GRQ,A514 GR R,A514 GRS,A514 GRT,. A514 Grade Q is for high yield strength, quenched and tempered alloy steel plate of structural quality in thickness of 150mm and under intended primarily for use in welded bridges and other …

AISI A514 Grade B Alloy Steel (UNS K11630) - AZoM

They comprise different kinds of steels which exceed the composition limits of Mn, C, Mo, Si, Ni, Va, and B set for carbon steels. They respond more quickly to mechanical and heat treatments than carbon steels. The following datasheet will discuss in detail about AISI A514 grade B alloy steel, which has high yield strength. Chemical Composition[PDF]

Data Sheet 1 ASTM A514 Grade B - SSAB

ASTM A514 Grade B High-Yield-Strength, Quenched and Tempered Alloy Steel Plate ... Chemical Composition Meets chemical requirements of ASTM A514 Grade B, as shown below (wt % ladle analysis): ... Thickness, width, and length tolerances for A514 Grade B steel plate are in accordance with the requirements of ASTM A6. The flatness tolerance for as ...

BEBON steel - A514 steel plate

Bebon International is a professional A514 steel exporter and a steel Stockist in china. We keep more than 1000 tons A514 steel in stock every month. If you want to get the A514 steel price, please do not hesitate to contact us. Any need in A514 Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling ...

Q310GNHJ Steel Plate steel plate,Q310GNHJ Steel Plate ...

Q310GNHJ Steel Plate has widely applications.In construction, Q310GNHJ Steel Plate is mainly used to make roof board and grill for industrial and civilian buildings. In light industry, Q310GNHJ Steel Plate is mainly used to make casing of household electric appliances, civilian smoke stack.

ASTM A514 / A514M - 18 Standard Specification for High ...

Abstract. This specification covers high-yield, quenched, and tempered alloy steel plates for use in welded bridges and other structures. Plates shall be subjected to heat treatment to conform to the tensile and hardness requirements for thickness, tensile strength, yield strength, elongation, reduction of area, and Brinell hardness.

supplier of sa514 gr b steel yield strength,A36,Q235B ...

China steel plate supplier SA514 Gr B steel millsteel . SA514 Gr.Q, steel plate SA514 Gr.Q is for high yield strength, SA514 Gr.Q shall be heat treatment by the mill to conform to the tensile and hardness requirements by heating to not less 900 degree and quenching in water or …

SA514 Gr.A Chemical composition mild steel plate price ...

As a SA514 Gr.A Chemical composition mill/factory in China,we can offer SA514 Gr.A Chemical composition steel geade stock,hot sell 09CuPCrNi-A,Corten A,A283C,A36 steel grade,Q345B grade,S355JR stock,S355J2 steel plate,Q345D,steel plate stock in China.

A514 Gr Q steel plate Chemical composition - pressure ...

We will give you the A514 Gr Q steel plate Chemical composition, pressure vessel steel plate grades plate competitive price, A514 Gr Q steel plate Chemical composition, pressure vessel steel plate grades plate good quality and best service from us.

A514 Grade Q|A514 Gr.Q|A514GrQ STEEL PLATE__Steel …

A514 Grade Q|A514 Gr.Q|A514GrQ STEEL PLATE ASME SA514 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service ASME SA514 grade Q plates shall be normalized.

Q310GNHJ Steel Plate steel plate,Q310GNHJ Steel Plate ...

Q310GNHJ Steel Plate has widely applications.In construction, Q310GNHJ Steel Plate is mainly used to make roof board and grill for industrial and civilian buildings. In light industry, Q310GNHJ Steel Plate is mainly used to make casing of household electric appliances, civilian smoke stack.

SA514 Grade M steel plate Chemical composition mild steel ...

As a SA514 Grade M steel plate Chemical composition mill/factory in China,we can offer SA514 Grade M steel plate Chemical composition steel geade stock,hot sell 09CuPCrNi-A,Corten A,A283C,A36 steel grade,Q345B grade,S355JR stock,S355J2 steel plate,Q345D,steel plate …

supplier of sa514 gr b steel yield strength,A36,Q235B ...

China steel plate supplier SA514 Gr B steel millsteel . SA514 Gr.Q, steel plate SA514 Gr.Q is for high yield strength, SA514 Gr.Q shall be heat treatment by the mill to conform to the tensile and hardness requirements by heating to not less 900 degree and quenching in water or …

a514 steel composition - w3s.in

ASTM A514 Grade Q|A514 Gr.Q STEEL PLATE__Steel Supplier. Gangsteel is specialized in supplying ASTM A514 steel plate in A514 grade Q. For more information of A514 grade Q steel plates, please check them in following: A514 Grade Q Chemical Composition. Learn more

A514 Steel Plate - ASTM514 Abrasion Resistant Steel ...

A514 is a conventional quenched and tempered alloy steel plate designed for structural applications. A514 steel is available in a variety of chemistries: A, B, C, E, F, H, J, K, M, P, Q, S, and T. All of these grades have the same mechanical properties.

ASTM A514 Grade Q Steel :: MakeItFrom

ASTM A514 grade Q is a type of ASTM A514 steel. Cited properties are appropriate for the quenched and tempered condition. The graph bars on the material properties cards below compare ASTM A514 grade Q to: wrought alloy steels in the same category (top), all iron alloys (middle), and the entire database (bottom).

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 Steel Plate. A516 steel plate, also known as PVQ516 steel plate, is carbon steel with specifications for pressure vessel plates and moderate or lower temperature service. A516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important.

ASTM A514/ A514M Grade F Quenched and Tempered Alloy Steel ...

ASTM A514/ A514M Grade F Quenched and Tempered Alloy Steel Plate TJC Steel can supply A514 Grade F/ A514 GrF Quenched and Tempered Alloy steel plate, mainly used in construction with high request of yield strength and welding.

ASTM A514 Alloy & Abrasion Resistant Steel Plate | Chapel ...

ASTM A514. A quenched & tempered, high-strength, weldable steel plate utilized in structural applications. Because of this material’s high yield strength it is ideal for projects requiring a light weight steel without sacrificing durability or toughness. Applications include truck & trailer frames, heavy construction equipment, and crane booms.[PDF]

Steel Plate & Sheet - Alro Steel

Heat Treatment Required Q&T Q&T Q&T Q&T ASTM A-514 Plate Grade B, Grade H, Grade F and Grade Q *This grade of steel may be susceptible to cracking in the heat-affected zone of welds during post-weld heat treatment (stress relief). Careful consideration should be given by competent

Q345 Steel Specification and Equivalent Standard

Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship, railway and vehicles, bridges, boiler, pressure vessel ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.