Tel: +86-371-86151827

aisi cold rolled stainless steel plate 316ln

Steel grade:aisi cold rolled stainless steel plate 316ln

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aisi cold rolled stainless steel plate 316ln Introduction

AISI/SUS 316LN - TJC STAINLESS.

AISI/SUS 316LN Stainless has a special requirement for N% which makes this material be with better tensile strength than AISI/SUS 316L stainlessThis material is mainly used in furnace parts,heat exchangers,jet engine parts,pharmaceutical tanks,evaporators,pulp,paper …

Cold Rolled 316ln Stainless Steel Plate Wholesale ...

Alibaba offers 132 cold rolled 316ln stainless steel plate products. About 57% of these are stainless steel sheets. A wide variety of cold rolled 316ln stainless steel plate options are available to you, such as aisi, astm, and jis.

China Stainless Steel Plate AISI 316ln - China Stainless ...

Stainless Steel Plate AISI 316ln, Stainless Steel Sheet AISI 316ln, Stainless Steel Coil AISI 316ln manufacturer / supplier in China, offering Stainless Steel Plate AISI 316ln, Stainless Steel Sheet 254smo, 254smo Stainless Steel Manufacturer, ASTM S32654 Stainless Steel Plate. ASTM a 240 Steel Plate and so on.

China Stainless Steel Sheet AISI 316ln, 1.4406 Stainless ...

China Stainless Steel Sheet AISI 316ln, 1.4406 Stainless Steel Sheet, Find details about China Stainless Steel Coil AISI 316ln Manufacturer, Stainless Steel Plate AISI 316ln Manufacturer from Stainless Steel Sheet AISI 316ln, 1.4406 Stainless Steel Sheet - Tianjin Yitejia Steel Sales Co., Ltd.

Aisi 304 Stainless Steel Prices

AISI 304 cold rolled stainless steel sheet/plate 2B finish . AISI 304 cold rolled stainless steel sheet DIN, GB, JIS, GB,DIN,ASTM,JIS,AISI,ect, SUS 201, 1mm-50mm.Source from Tianjin Huanyu Hengtong Stainless Steel

China AISI Stainless Steel Sheet (316N 317LN 316CB 317LMN ...

316ln Stainless Steel Sheet, 316CB Stainless Steel Sheet, 317lmn Stainless Steel Sheet manufacturer / supplier in China, offering AISI Stainless Steel Sheet (316N 317LN 316CB 317LMN), 0.39mm 0.4mm 0.41mm 0.42mm 0.43mm 0.44mm 99.994% Pure Lead Foil for Laboratory, 99.994% Pure Lead Foil for Laboratory and so on.

China AISI SUS Stainless Steel Plate (321 316LN 430 631 ...

321 Stainless Steel Plate, Stainless Steel Plate 321, Stainless Steel 321 Plate manufacturer / supplier in China, offering AISI SUS Stainless Steel Plate (321 316LN 430 631), 5/8" 3/4" Cold Rolled Carbon Steel Sheet A36 Ss400, Cold Rolled Carbon Steel Sheet (SAE 1045 1050 A36) and so on.

304/304L cold rolled stainless steel sheet

304/304L cold rolled stainless steel sheet. About 304 material and 304L material: 304 stainless steel is a common material, a density of 7.93 g / cm3, the industry alsoknown as 18/8 stainless steel.

inox 316ln stainless steel sheet - alibaba

Alibaba offers 94 inox 316ln stainless steel sheet products. About 15% of these are stainless steel sheets. A wide variety of inox 316ln stainless steel sheet options are available to you, such as astm, aisi…

1.4429-ESU 316LN Stainless Steel Round Bar Hot Rolled ...

Material 1.4429-ESU (316LN) According to CERN Specification 316L Stainless Steel Round Bar . ASTM A240/A240M AISI 316LN DIN 1.4429 Stainless Steel Plate 2B and NO.1 Finish. 316LN (UNS S31653) is a lowcarbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel.

Steel plate,Sheet,Flat bar,Round bar - Longhai special

Our to produce better steel-based products are the main used in industrial manufacturing various types of steel plate,round bar, round rod,pipe,tube,coil,stainless steel tube,Forging,mould,round ingot,cold-rolled steel,hot-rolled coil,strap steel,hot-rolled steel,sheet,medium plate,heavy plate,shapped bar,hexahedral bar,octagon bar,cold-rolled ...

304/304L|316/316L - ASTM A240 Stainless Steel Plate ...

ASTM A240 steel plate covers Austenitic Steels, Ferritic steels and Martensitic Steels. 304/340L, 316/316L is common stainless steel grades for many industries, ANSON can provide you best ASTM A240 steel plate for your project.

China Stainless Cold Rolled Steel Pipe/Tube 316 316L 316ln ...

Steel Products, Stainless Steel Pipe, Steel manufacturer / supplier in China, offering Stainless Cold Rolled Steel Pipe/Tube 316 316L 316ln 316ti, 400 Series Stainless Steel Round Rod/Ball/Bar, Stainless Steel Cold Rolled Seamless Pipe 304L and so on.

Aisi 304 Stainless Steel Prices

AISI 304 cold rolled stainless steel sheet/plate 2B finish . AISI 304 cold rolled stainless steel sheet DIN, GB, JIS, GB,DIN,ASTM,JIS,AISI,ect, SUS 201, 1mm-50mm.Source from Tianjin Huanyu Hengtong Stainless Steel

316LN cold rolled stainless steel bar - vamosargentina.net

Stainless Steel, Stainless Steel Bar, Stainless Steel Product manufacturer / supplier in China, offering Stainless Steel Rod&Bar 316 316L 316ln 316ti, Stainless Steel Plate for Elevator Sheet 321, ASTM 304 Stainless Steel Cold Rolled 2b Surface Plate and so on.

1.4429-ESU 316LN Stainless Steel Round Bar Hot Rolled ...

Material 1.4429-ESU (316LN) According to CERN Specification 316L Stainless Steel Round Bar . ASTM A240/A240M AISI 316LN DIN 1.4429 Stainless Steel Plate 2B and NO.1 Finish. 316LN (UNS S31653) is a lowcarbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel.

AISI SUS 316L Stainless Steel Plate - srilankasports.org

316l Stainless Steel Plate 304l, 316l Stainless Steel ... 316ln stainless steel shim plate sus316 steel ties 430stainless steel bright wire sus cold rolled sus304 steel drum sus 306l 304 stainless steel badge astm 253ma stainless steel plate price stainless steel finish tool tube sheet plate stainless steel price for tank brazil stainless steel chemical structure stainless steel aisi 316 cold ...

Cold Rolled Steel Sheet | Cold Rolled Steel Plate

Industrial Metal Supply is your #1 source for steel sheet and plate. We can provide cold rolled steel sheet and cold rolled steel plate in the size and gauge you need, including custom cut-to-size pieces. Contact us for steel sheet, plate, and much more.

Stainless Steel Plates, SS Plate Manufacturers and ...

SS Plates, Stainless Steel Plate, ASTM A240 SS Plates Suppliers, ASME SA240 Stainless Steel Plates, SS 304 Chequered Plates, ASTM A240 Grade TP304L Stainless Steel Polished Plates, SS 304H Hot Rolled Plates, Type TP 304LN SS BA Finished Plates Exporters, 309 Austenitic Stainless Steel Plates Manufactures in Mumbai India.

ASTM Standard aisi 304 stainless steel hot rolled sheet ...

stainless steel sheet,stainless steel plate,stainless steel sheet metal, hot rolled stainless steel sheet plate,cold rolled stainless steel sheet plate. stainless steel hot rolled sheet plate. Standard: 1. ASTM A240/240M-10, ASTM A240-05. 2. GB/T3280-2009, GB/T4237-2009, GB/T4238-2009, GB/T3280-2007, GB/T4237-2007. 3. JIS G4304-2005,J IS G4305 ...

AISI 316 (S31600) Stainless Steel :: MakeItFrom

AISI 316 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 316 is the AISI designation for this material. S31600 is the UNS number. Additionally, the British Standard (BS) designation is 316S16.

304/304L|316/316L - ASTM A240 Stainless Steel Plate ...

ASTM A240 steel plate covers Austenitic Steels, Ferritic steels and Martensitic Steels. 304/340L, 316/316L is common stainless steel grades for many industries, ANSON can provide you best ASTM A240 steel plate for your project.

Online Metal Store | Small Quantity Metal Orders | Metal ...

1018 Mild Steel Alloy 1018 is the most commonly available of the cold-rolled steels. It is generally available in round rod, square bar, and rectangle bar. It has a good combination of all of the typical traits of steel - strength, some ductility, and comparative ease of machining.

Cold Rolled Carbon – Olympic Steel

olysteel› ProductsHome / Products / Cold Rolled Carbon Cold Rolled Steel Products We commonly stock commercial quality (CQ), AHSS Advanced high strength steel, drawing steel (DQ), COR-TEN® weathering steel, 1/4 Hard and 1/2 Hard, automotive grades, and more cold rolled steel coil and sheet products.

AISI 316N (S31651) Stainless Steel :: MakeItFrom

AISI 316LN (S31653) Stainless Steel AISI 316 (S31600) Stainless Steel. AISI 316L ... ASTM A666: Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar. ASTM A182: Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for ...

Cold Rolled 1008/1010 Steel | Mead Metals in Minnesota

Cold Rolled 1008/1010 Steel Product Specifications. Mead Metals Inc. carries cold rolled steel per ASTM A1008 and AISI 1008/1010 grades. We offer ranges of sizes and quantities to fit your project’s needs. We accommodate both high and low volume cold rolled steel orders.

Outokumpu stainless steel finder

The following dimensions are based on the minimum and maximum of all steel grades available for that product form. You may narrow the product forms and steel grades displayed by …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.