Tel: +86-371-86151827

astm a653 hot rolled steel plate

Steel grade:astm a653 hot rolled steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a653 hot rolled steel plate Introduction

Hot Rolled Mild Steel Plate A36 - OnlineMetals

Hot Rolled Steel Plate A36 (0.1875") is made of low carbon steel that is commonly found in most industries as it offers good weldability, machinability, and can be heat treated to harden its surface. Unlike cold rolled steel, Hot Rolled Steel Plate A36 has a rougher surface …

ASTM A653 / A653M - 18 Standard Specification for Steel ...

A653 / A653M-18 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process ... and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for. A902 Terminology Relating to Metallic Coated Steel Products. A924/A924M Specification for ... ASTM A653 / A653M ...

Standard Specification for Hot-Rolled Structural Steel ...

1.1 This specification covers three types and five strength grades of high-strength low-alloy, hot-rolled structural steel plate for use in truck frames, brackets, crane booms, rail cars, and similar applications. Steels that conform to this specification offer improved formability. These steels are normally furnished in the as-rolled condition.

0.125" (11 GA) ASTM A1011 Hot Rolled STEEL SHEET - Online ...

Hot Rolled Steel Sheet A1011 (0.125" - 11 GA) is made of low carbon steel that is commonly found in most industries as it is a high strength, highly formable steel, commonly used to create drums, containers, and in general fabrication. Unlike cold rolled steel, Hot Rolled Steel Sheet A1011 has a rougher surface and with galvanization, it can resist corrosion well.

ASTM A653 Galvanized Steel - TubingChina

ASTM A653 Galvanized Steel. ASTM A653 Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process covers steel sheet, zinc-coated or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths.The material is available in several designations as follows: commercial steel, forming steel, deep drawing steel ...

Astm A653 Csb Hot Rolled Galvanized Pickled And Oiled ...

Astm A653 Csb Hot Rolled Galvanized Pickled And Oiled Steel Coil Plate , Find Complete Details about Astm A653 Csb Hot Rolled Galvanized Pickled And Oiled Steel Coil Plate,Astm A653 Csb Galvanized Steel Plate,Hot Rolled Pickled And Oiled Steel Coil,Astm A653 Csb Steel Plate from Steel Sheets Supplier or Manufacturer-Qingdao Qinyuan Steel Co., Ltd.User rating: 5/5

140g Hot Rolled Astm a653 Hot Dip Steel Coil

140g Hot Rolled Galvanized Steel Coil, 140g Hot Rolled ...As well as from galvanized, coated. And whether 140g hot rolled galvanized steel coil is steel coil, steel plate, or coil. There are 366 140g hot rolled galvanized steel coil suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of 140g hot rolled …

Astm A653 Steel Plate, Astm A653 Steel Plate ... - alibaba

Alibaba offers 11,974 astm a653 steel plate products. About 95% of these are steel sheets, 1% are stainless steel sheets. A wide variety of astm a653 steel plate options are available to you, such as plate…[PDF]

PRODUCT GUIDES - Central Steel and Wire Company: …

During the fabrication of parts made from flat rolled steel products (sheet/plate), some of these parts require the steel to be formed (bent) into different angles (examples…45 degrees, 90 degrees). This is usually done with the use of a “press brake”. The steel is forced down over a …[PDF]

Specifications -Using Cold-Rolled Steel Plate

Specifications-Using Cold-Rolled Steel Plate-1) Size for EN Structural Quality is EN10147-2) The tensile strength of A446 Grade A is 310MPa (N/mm 2) Classification Standards POSCO KS D 3506 JIS G3302 ASTM EN 10142 89 95 General Use CGCC SGCC SGCC A 526 A 653-CQ DX51D Lock Forming CGCF SGCD 1 SGCD 1 A 527 A 653-LFQ -

MetalsDepot® - Buy Steel Sheet Online - Any Quantity, Any ...

C1008/1010 HR Steel Sheet - (ASTM A1011, A569) Hot Rolled Steel Sheets are the most economical steel sheets available for a wide variety of applications. HR Steel Sheets are easy to weld, form and drill, and has a slight grainy surface.

ASTM A653M-2002 CS Type C Galvanized Steel Plate-GNEE ...

Product Introduction

140g Hot Rolled Astm a653 Hot Dip Steel Coil

140g Hot Rolled Galvanized Steel Coil, 140g Hot Rolled ...As well as from galvanized, coated. And whether 140g hot rolled galvanized steel coil is steel coil, steel plate, or coil. There are 366 140g hot rolled galvanized steel coil suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of 140g hot rolled …

ASTM A653 Hot-dip Galvanized Structural Steel Sheet | Linkun

Just let us know size and quantity of your need and we can help you find the material that is right for you. Linkun is one of the leading China Steel Plate/Coil manufacturers and suppliers, if you want to buy or import best high-quality astm a653 hot-dip galvanized structural steel sheet professional company, factory, seller, and exporter, or if you are checking steel brands, please feel free ...

ASTM A653 Hot Dipped Galvanized Steel On MST Steel …

Browse ASTM A653 Hot Dipped Galvanized Steel in the MST Steel Corp. catalog including Item #,Steel Type,Minimum Yield Strength Supplies Steel Coils & Sheets-Michigan-Kentucky-MST Steel MST Steel Corp. is a Supplier and Processor of Steel Coils and Steel Sheets.

EN10142 ASTM A653 Hot Dipped Gl Coils for Container Plate ...

EN10142 ASTM A653 Hot Dipped Gl Coils for Container Plate , Ship Plate . Hot dipped galvanized steel coil used for Container plate,ship plate. Hot-dipped galvanized steel sheet is characterized by protection base metal(Fe) as corrosion resistance of zinc itself and acts effective sacrificed-anodic of zinc.

A653 DDS Type A galvanized steel plate,hot rolled DDS …

Under steel standard ASTM A653/A653M,galvanized steel plate A653 DDS Type A is owned the yield strength within 140-240 Mpa,and comparing with A653 DDS Type C which is owned yield strength within 170-280 Mpa,else,galvanized steel sheet and coil A653 DDS Type C has limited on elements Phosphorus when rolling within 0020-0.100 %.Generally the galvanized steel sheet and coil A653 …

Plate & Sheet | PDM Steel Service Centers, Inc.

Hot Rolled ASTM-A36. Hot rolled plates made to ASTM-A36 are intended for use in structural applications. ... Galvanized Sheet ASTM-A653 Commercial Quality. Galvanized steel is available in coil form and may be slit to specific widths as well as leveled into flat sheets. Zinc may be applied to the steel in various coating thicknesses.

ASTM A653 cold rolled galvanized steel coil 0.21mm

0.21mm tinplate sheet coil for sale stainless handrails empty food tin plate Hot rolled, cold rolled Embossed Aluminum Coil 1060,1050 in Jianmhui Met. BS1387 S235JR Welded Hot Rolled Stainless Steel Standard Galvanized Pipe for Irrigation . SGCC JIS G3302 or ASTM A653 …

ASTM A653M-2002 CS Type C Galvanized Steel Plate-GNEE ...

Product Introduction. A653M CS Type C hot dipped g alvani z ed steel /PPGI steel sheet/Zinc coated steel coil/GI coil is mild steel with a coating of zinc.. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel.

supplier of jis g3302 astm a653 hdg …

A wide variety of steel astm a653 jis g3302 options are available to you, such as aisi, astm, and jis. You can also choose from steel coil, steel plate. As well as from cold rolled, hot rolled, and erw. And whether steel astm a653 jis g3302 is coated, or galvanized. There are 2,550 steel astm a653 jis g3302 suppliers, mainly located in Asia.

A653 CS Type B G90 Galvanized Sheet

ASTM A653 CS Type B¹ (A526/A527 CQ)² Most chem treat stock is not RoHS compliant. Item # ASTM653-CS TYPE B, ASTM A653 Hot Dipped Galvanized . Galvanized Commercial Quality Available in 50G/50G, 60G/60G, 70G/70G, 90G/90G, G30, G40, G60 and G90. Specifications. Steel Type. Hot Dipped Galvanized Commercial Quality.

ASTM A653 steel sheet sheet price

ASTM A653 steel sheet sheet price steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. ASTM A653 steel sheet sheet price can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel.

astm a653 g90 galvanized steel coil, View prepainted steel ...

High-strength Steel Plate. Width: 914-1250 mm. Length: 200-800m/ton. Product name: ... astm a653 g90 galvanized steel coil ... ss galvanized steel coil customized astm a526 galvanized steel coil hot rolled steel coil wuxi hot coil manufacturers equipment coil build of iron suppliers hot roll coil used suppliers advanc mill suppliers.

Harvard Steel

*In 1998, ASTM discontinued Forming Steel (FS) for hot rolled (A621) and cold rolled (A619). ... a per-side basis. Note that, although a precise conversion between the metric categories (20G/20G, 40G/40G, etc.) and ASTM A653 “G” and “A” categories (G30, G60, etc.) cannot be made, a 90G/90G coating category (metric) is approximately ...

ASTM A653 CQ G30 Galvanized Metal Sheet Coil

Astm A653 Galvanized Steel Coils G90 - Alibaba. astm a653 galvanized cold rolled steel coils g90 for iron roofing sheet TradeAssurance ASTM A653 G90 CS type B galvanized steel coil and sheet jis chinamanufacture ! g30 galvanized steel coil and sheet astm a653 galvanized steel . Charts - Harvard Steel. Steel Sheet Designations.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.