Tel: +86-371-86151827

aisi stainless plate sheet 201

Steel grade:aisi stainless plate sheet 201

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aisi stainless plate sheet 201 Introduction

USA AISI AISI 201 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 201 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

aisi 201 stainless steel plate - hopkinsplasticsurgery

Stainless Steel Plate - Stainless Steel 904L Plate … Stainless Steel Plate Providing you the best range of stainless steel 904l plate, stainless steel 304 plates, stainless steel 321 plate, stainless steel 310 plates, stainless steel 201 plate and stainless steel plates with effective & timely delivery.

Cold rolled AISI 201 stainless steel plate | CostaSteel

AISI 201 stainless steel,SS 201 stainless - BEBON 201 - bebon steel. AISI 201 stainless steel is an austenitic chromiumnickel-manganese stainless steel that 201 stainless steel coil has cold rolled and hot rolled two kinds. 201 stainless steel plate is widely used in petrochemical industry,nuclear power,water. Read More

201 Stainless Sheet Plate, 201 Stainless Sheet Plate ...

Alibaba offers 42,647 201 stainless sheet plate products. About 92% of these are stainless steel sheets, 3% are steel sheets, and 1% are sheet metal fabrication. A wide variety of 201 stainless sheet plate options are available to you, such as aisi, astm, and jis.

AISI 201, UNS S20100, ASTM A240, 201 Stainless Steel Sheet ...

Manufacturer, Suppliers, exporters Of high quality AISI 201, UNS S20100, ASTM A240, 201 Stainless Steel Sheet, Stainless Steel 201 Sheet,1.4373 Sheet, SUS 202 Sheet …Carbon, Max %: 0.15x

AISI 201 (S20100) Stainless Steel :: MakeItFrom

AISI 201 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 201 is the AISI designation for this material. S20100 is the UNS number. It has a moderately high electrical conductivity among wrought austenitic stainless steels.

ASTM 201 stainless steel sheet/plate,201 steel grade ...

ASTM 201 stainless steel sheet/plate ,201 steel grade ASTM 201 stainless steel sheet ,201 steel gradeis used for stamped and machined products including appliances, kitchen and foodservice equipment, sinks, cookware, railway cars, tractor trailers and automotive trim.

stainless steel sheet plate - asiametalltd

201 Inox Coils Stainless Steel Product Details . Best Quality 430 Stainless Steel Plate ... 316Ti Stainless Steel Sheets and Plates Product Details . Number 4 Finish Grade 316L Stainless Steel Sheets ... price of aisi 430 stainless steel sheet price Product Details

Stainless Steel Aisi 201 Plate Wholesale, Plate Suppliers ...

A wide variety of stainless steel aisi 201 plate options are available to you, such as free samples, paid samples. There are 46,316 stainless steel aisi 201 plate suppliers, mainly located in Asia. The top supplying countries are China (Mainland), India, and Taiwan, which supply 99%, 1%, and 1% of stainless steel aisi 201 plate respectively.

China AISI 201 Stainless Steel Plate - China Steel Sheet ...

Steel Sheet, Stainless Steel Sheet, Stainless Sheet manufacturer / supplier in China, offering AISI 201 Stainless Steel Plate, St37-2 Ss400 Hot Rolled Mild Steel Checkered Plate, Q235 Mild Low Carbon Steel Hot Rolled Steel Coil and so on.

AISI/SUS 201 - TJC STAINLESS.

TJC Stainless is the most competitive manufacture and supplier of 201 stainless steel in thickness 0.3mm-80mm and width up to 2200mm.Other special requests about specification,please contact us. Click Here to See PDF Details for AISI/SUS 201 Stainless Steel Coils/Sheets

Aisi 201 stainless steel bar

Wuxi Changhao Special Steel Co., Ltd. is a large-scale stainless steel enterprise. We are specialized in kinds of stainless steel products, especially stainless steel plate/coil/pipe/bar, which are widely used in the fields of food processing, medicine, chemical industry, metallurgy, construction, water conservancy and aerospace industries.

201,204,310,310s,316,316L,321,430 Stainless steel plate ...

Corrosion Resistance of AISI 316 Stainless Steel Bar. 420 stainless steel, 420 stainless steel mechanical properties ... 1.4401 Stainless Steel Plates and Sheets; 300 series stainless steel. ... 301 stainless steel, 301 stainless steel supplier; 3/4" Stainless 17-4PH Annealed Steel Plates; 316L stainless steel, 316L stainless steel Mechanical ...[PDF]

201 Stainless Steel Sheet - Since 1948

201 Stainless Steel Sheet 201 alloy is a high performance austenitic stainless steel that combines good mechanical properties, corrosion resistance, formability, fabrication, and welding characteristics and is similar in many respects to 304 stainless steel. The substitution of manganese for a portion of the nickel content used in 300 Series

201 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 201 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

AISI Stainless Steel Plate with Polished Surface (201/202 ...

China AISI Stainless Steel Plate with Polished Surface (201/202/304/304L/316L), Find details about China Stainless Steel Plate, Stainless Steel Sheet from AISI ...

Stainless steel sheet - Foshan Shunhengli Import & Export ...

China Stainless steel sheet catalog of Bronze Color Stainless Steel Sheet Hairline Finish AISI 304 / AISI430, Foshan Stainless Steel Sheet 201 304 Ss Plate 4X8 Size PVC Coating provided by China manufacturer - Foshan Shunhengli Import & Export Co., Ltd., page1.

China Cold Rolled 201 304 304L 316 Stainless Steel Sheet ...

Stainless Steel Sheet, 304 Stainless Steel Sheet, Stainless Steel Sheet Price manufacturer / supplier in China, offering Cold Rolled 201 304 304L 316 Stainless Steel Sheet, St37-2 Ss400 Hot Rolled Mild Steel Checkered Plate, Q235 Mild Low Carbon Steel Hot Rolled Steel Coil and so on.

China Best Quality 201 Stainless Steel Plate - China Sheet ...

Sheet, Stainless Steel Sheet, 201 Stainless Steel Sheet manufacturer / supplier in China, offering Best Quality 201 Stainless Steel Plate, Hot Sale 6082 Aluminium Anti-Slip Plate, Good Quality Competitive Price 2024 Aluminium Square Pipe and so on.

Stainless Steel Sheet/ Plate (201, 304, 316, 430,etc ...

Shanghai Metal Corporation is a trusted Stainless Steel Sheet/ Plate (201, 304, 316, 430,etc) supplier in china, we have extensive inventory of Stainless Steel Sheet/ Plate (201, 304, 316, 430,etc), and other metals in various alloys and tempers.

ASTM A240 Type 316, 316L Stainless Steel Sheet and Plate ...

ASTM A240 Type 316 is the second-most common stainless steel next to 304.Stainless Steel Sheet Type 316 generally contains 16% chromium and 10% nickel, with the addition of molybdenum normally ranging from 2-3%. Molybdenum increases corrosion resistance, particularly against chlorides and other industrial solvents.

China SUS304 Mirror Finish Stainless Steel Sheet and 201 ...

Stainless Steel Sheet, Stainless Steel, Stainless Steel Plate manufacturer / supplier in China, offering SUS304 Mirror Finish Stainless Steel Sheet and 201 Ss Plate 8K Polished, Modern Hotel Folding Screen /Partition Devider/ Stainless Steeldecoration, Interior Partition Wall Living Room Divider Stainless Steel Screens for Luxury Villa Decoration and so on.

China Supplier AISI ASTM 201 304 410 430 316 Stainless ...

China Supplier AISI ASTM 201 304 410 430 316 Stainless Steel Sheet Plate 2B BA(id:10010658). View product details of China Supplier AISI ASTM 201 304 410 430 316 Stainless Steel Sheet Plate 2B BA from Henan Jianye Stainless Steel manufacturer in EC21[PDF]

Stainless Steel - Since 1948

Stainless Steel 201 alloy is a high performance austenitic stainless steel formulated to have a lower and more stable cost due to the substitution of manganese for a portion of the nickel used in 300 series stainless steels such as Type 304. In addition, the chemical composition of alloy 201 provides higher annealed mechanical

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.