Tel: +86-371-86151827

astm a276 304 datasheet

Steel grade:astm a276 304 datasheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a276 304 datasheet Introduction

[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades[PDF]

Stainless 302, 304, 304L, 305 - United Performance Metals

Stainless 302, 304, 304L, 305 1 .888 282 3292 | UPMET.COM. Types 302 (S30200), 304(S30400), 304L (S30403), and 305 (S30500) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family.

Stainless Steel | Interlloy | Engineering Steels + Alloys

See the Datasheet here > 304: AS2837-1986-304 AISI TYPE 304 BS970-304 ASTM A276-304: 0.08 MAX: 9.0: 19.0: Readily formed and welded stainless, used mainly in domestic, dairy and decorative appliances. See the Datasheet here > 316: AS2837-1986-316 AISI TYPE 316 BS970-316 S31 & S33 ASTM A276-316:

Grade AISI 304 Stainless Steel Properties Composition SS ...

AISI 304 Equivalent Grade. ASTM type 304 stainless steel equivalent to ISO, European EN, Germany DIN, British BSi, France NF, Japanese JIS and Chinese GB standard (For reference). Notes: DIN 17440 has been replaced by DIN EN 10088-2. Chinese stainless steel grade 0Cr18Ni9 is an old designation, and has been replaced by 06Cr19Ni10.[PDF]

STAINLESS STEEL - 304 / 304L - Global Metals

Great Britain 304 - BS970 Part3 1991 304S31 304L - BS970 Part3 1991 304S11 Japan JIS 4303 SUS 304 JIS 4303 SUS 304L USA ASTM 276-986 304 304 - UNS S30400 304L - UNS S30403 SAE 30304 AISI 304 AISI 304L DESCRIPTION: 304 is a general purpose 18/8 stainless steel with good strength and excellent corrosion resistance.

304 Stainless Steel Wire UNS S30400 | Ulbrich

304 Stainless Steel Wire UNS S30400 Download Datasheet. Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire ASTM A240, ASTM A276, ASTM A 313, ASTM 479,AMS 5513, AMS 5910, AMS 5911, AMS 5912, AMS 5913, AMS 5501, ASTM A666. 304 Alloy Description. Alloy 304 is the standard 18/8 (18% chrome, 8% nickel) austenitic stainless steel and is the ...

Carpenter - CarTech® 304/304L Stainless

CarTech 304 stainless is the most widely used chromium-nickel austenitic stainless steel. It is nonmagnetic in the annealed condition and becomes slightly magnetic when cold worked. It has excellent fabricability and weldability characteristics. Nonhardenable by heat treating. CarTech 304L Stainless Composition (Nominal)

ASTM A276-10 304 Stainless Steel Round Bar

Buy Metal Online – ASTM A276-10 304 Stainless Steel Round Bar – Order Large or Small Quantity Online – Cut to Size Stainless Bar – No Minimum Order

ASTM A276, Stainless Steel Bars and Shapes - Otai Steel

ASTM A276 is standard for Stainless Steel Bars and Shapes. This specification ASTM A276 covers hot-finished or cold-finished bars except bars for reforging. It includes rounds,squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in …[PDF]

2205 Technical Data Sheet - schmolz-bickenbach.us

• ASTM A276 • ASTM A479 • ASTM A484 Typical Physical Properties (Typical) ... pares to AISI 304 and AISI 316. The general corrosion resistance of ... Technical Data Sheet schmolz-bickenbach.us Carol Stream, IL (800) 232-5569 • Streetsboro, OH (800) 232-5569 • Greer, SC (800) 232-5569 ...[PDF]

STAINLESS STEEL - 304 / 304L - Global Metals

Great Britain 304 - BS970 Part3 1991 304S31 304L - BS970 Part3 1991 304S11 Japan JIS 4303 SUS 304 JIS 4303 SUS 304L USA ASTM 276-986 304 304 - UNS S30400 304L - UNS S30403 SAE 30304 AISI 304 AISI 304L DESCRIPTION: 304 is a general purpose 18/8 stainless steel with good strength and excellent corrosion resistance.[PDF]

304 Stainless Steel, UNS S30400 - Ulbrich

304 Stainless Steel, UNS S30400 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire ASTM A240, ASTM A276, ASTM A 313, ASTM 479,AMS 5513, AMS 5910, AMS 5911, AMS 5912, AMS 5913, AMS 5501, ASTM A666 304 Alloy Description Alloy 304 is the standard 18/8 (18% chrome, 8% nickel) austenitic stainless steel and is the most commonly used

Stainless Steel 304 / AMS 5513 / AMS 5511/ Alloy 304L

Types 304 Stainless Steel and 304L Stainless Steel are covered by the following specifications: Type 304 L Vac Melt (AMS 5647, QQ-S-763, ASME SA 479, ASTM A 276, ASTM A 479, ASTM A 484) AMS 5501 Sheet / strip 125ksi AMS 5511 Sheet /strip (ann) AMS 5513 Sheet / strip (ann) AMS 5560 Seamless tube AMS 5563 1/4Hd seamless/welded

Carpenter - CarTech® 304/304L Stainless

CarTech 304 stainless is the most widely used chromium-nickel austenitic stainless steel. It is nonmagnetic in the annealed condition and becomes slightly magnetic when cold worked. It has excellent fabricability and weldability characteristics. Nonhardenable by heat treating. CarTech 304L Stainless Composition (Nominal)

ASTM A276, Stainless Steel Bars and Shapes - Otai Steel

ASTM A276 is standard for Stainless Steel Bars and Shapes. This specification ASTM A276 covers hot-finished or cold-finished bars except bars for reforging. It includes rounds,squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels.

304 / 304L Stainless Steel Bar Stock - twmetals

304 / 304L Stainless Steel Bar Stock . 304 and 304/L (UNS S30400 & UNS S30403) are austenitic alloys of stainless steel bars. These alloys are the most familiar and most frequently used alloys in the stainless steel family. The L in 304/L refers to a lower carbon content to allow for greater corrosion protection when welding.

ASTM A276-10 304 Stainless Steel Flat Bar | 304 Stainless ...

Buy Metal Online – ASTM A276-10 304 Stainless Steel Flat Bar – Order Large or Small Quantity Online – Cut to Size Stainless Bar – No Minimum Order

NITRONIC 60 (Alloy 218, UNS S21800)

Corrosion resistance is similar to 304, with twice the strength of 316. Wear and Galling resistance are increased using this Nitronic 60, especially when self mated. ... NITRONIC® 60 (Alloy 218) (UNS S21800) Click for High Strength NITRONIC® 60 Click for NITRONIC® 60W (UNS S21880) Weld Wire ... ASTM A193 ASTM A194 ASTM A276 ASTM A479 F899 ...

ASTM A276 / A276M - 17 Standard Specification for ...

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.. ASTM Standards. A314 Specification for Stainless Steel Billets and Bars for Forging. A370 Test Methods and Definitions for Mechanical Testing of Steel Products. A484/A484M Specification for General Requirements for Stainless Steel ...

Stainless Steel - Grade 302 (UNS S30200)

Grade 302 is a slightly higher carbon version than grade 304. It is widely found in strip and wire forms. It is a standard specification for chromium and chromium-nickel stainless steel sheet, plate, and strip used for pressure vessels and for general applications. The following datasheet provides an overview of grade 302 stainless steel.[PDF]

321 STAINLESS STEEL - clevelandmetal

321 STAINLESS STEEL 321 StainleSS Steel AK Steel Corporation 9227 Centre Pointe Drive West Chester, OH 45069 800.331.5050 aksteel The information and data in this product data sheet are accurate to the best of our knowledge and belief, but are intended for general information only.[PDF]

Stainless 316, 316L, 317, 317L - United Performance …

Stainless 316, 316L, 317, 317L 1 .888 282 3292 | UPMET.COM. Types 316 (UNS S31600), 316L(S31603), 317 (S31700), and 317L (S31703) are molybdenum -bearing austenitic stainless steels which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304.

304 Austenitic Stainless Steel-Introduction, Applications ...

Introduction Products Data Sheet Related More Grades + Introduction. Overview & Features of Inox 304. ... and more than 8% nickel. 304 stainless steel is a grade of stainless steel produced in accordance with American ASTM standards. SUS 304 indicates the Japanese standard.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.