Tel: +86-371-86151827

aisi 4140 alloy steel plate

Steel grade:aisi 4140 alloy steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aisi 4140 alloy steel plate Introduction

4140 Alloy Steel | 1.7225 | SCM440 | 42CrMo4 - OTAI ...

1. SAE AISI 4140 steel Form of Supply. ASTM / AISI 4140 Alloy structural steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and square, block. 4140 alloy steel Round bar can be cut to your required lengths as one offs or multiple cut pieces.

4140 | ALLOY | In Stock | Castle Metals Site

Where it makes sense, Castle Metals can simplify our customers' inbound network and reduce our customers' total cost of ownership. Alloy 4140 (AISI 4140) is one of the most popular direct hardening Cr-Mo alloy steel plates that have the ability to develop an extensive range of hardness and strength.

AISI 4140 Alloy Steel Plate Suppliers and Manufacturers ...

Find aisi 4140 alloy steel plate here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

9839 | 4140 | 4140 | ALLOY | Metals | Castle Metals Site

Alloy 4140 (AISI 4140) is one of the most popular direct hardening Cr-Mo alloy steel plates that have the ability to develop an extensive range of hardness and strength. Alloying elements and thermal treatments, such as quenching and tempering, greatly influence the hardness and strength of the steel.

AISI 4140 Steel /1.7227 /42CrMoS4 - China AISI 4140 Steel ...

AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist and Exporter.AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications.

AISI 4140 Steel Bar - Otai Special Steel

Supply Range for AISI alloy 4140 steel bar. 4140 Steel Round Bar: diameter 8mm – 3000mm. 4140 …

ASTM A829 AISI 4130/AISI 4140 Alloy & Abrasion Resistant ...

ASTM A829 AISI 4130/AISI 4140 grades have a high fatigue strength and are also abrasion and impact resistant. ... Alloy & Abrasion Resistant Steel Plate. ASTM A829 AISI 4130/AISI 4140. A chromium – molybdenum alloy structural steel with great through hardening properties and excellent toughness. These grades have a high fatigue strength and ...

AISI 4140 Alloy Steel (UNS G41400) - Material Science

Topics Covered

AISI 4140 Steel Bar - Otai Special Steel

AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist and Exporter. AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications.Similar to alloy grade AISI 4130 chrome moly alloy steel but with a slightly higher carbon content.

AISI 4140 steel | 1.7225 | 42CrMo4 | SCM440 - OTAI Special ...

AISI 4140 Steel / 42CrMo4 steel is a Alloy Structural Steel belong to ASTM A29/A29M Steel Grade standard. And AISI 4140 used in Oil and Gas industry and Large Machinery Strutural. What’s more, AISI 4140 Steel / 42CrMo4 steel China Supplier and factory Otai Special Steel Supply AISI 4140 steel in Round bar, Plate, Flat bar, Square, Forging Ring and others any shape.

4140 AISI 4140 SAE 4140 Alloy Steel - SAE AISI 1010 1015 ...

AISI 4140 is suitable for a variety of applications in the oil and gas sector. This material can be supplied to AISI steel standards. A829-4140 steel plate is structural quality alloy steel plate with specific chemical composition requirements given in detail below. Tensile properties may also be

AISI 4140 Steel /1.7227 /42CrMoS4 - China AISI 4140 Steel ...

AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist and Exporter.AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications.

Aisi 4140 Alloy Steel Plate, Aisi 4140 Alloy Steel Plate ...

Alibaba offers 432 aisi 4140 alloy steel plate products. About 60% of these are steel sheets, 15% are steel round bars, and 1% are nickel. A wide variety of aisi 4140 alloy steel plate options are available to you, such as aisi, astm, and gb.

Alloy Plate - 4140 / 4340 / 8620 - Oliver Steel Plate

Alloy Plate - 4140 / 4340 / 8620 - ASTM A 829 Standard specification for Alloy Steel Plate Furnished to Chemical Composition Requirements. ASTM A 829 was first issued in 1984; prior to that these grades were defined by AISI specifications.

AISI 4140 Cold Finish Annealed Alloy Steel | Specialty ...

We stock AISI 4140 steel in squares, flats and hexagons. Call or Email Us for a Free Quote. All material is provided in a cold finished & annealed condition. We offer an extensive inventory of hard-to-find sizes and lengths including (10/12 Ft Random Lengths, 20/24 Ft …

MetalsDepot® - 4140 Alloy Steel Flat Bar

4140 Alloy Steel Flat is an cold drawn annealed steel of relatively high hardenability with its chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength. 4140 Alloy Steel Flat responds well to heat-treatment and is relatively easy to machine in the annealed condition. 4140 Alloy ...[PDF]

Alloys & Tool Steel - alro

Alloys and Tool Steel Bar and Plate Products ... Alloys and Tool Steel AISI 4140 - Annealed Flats and Squares HR (Cut From Plate) (Also available in DCF) Please refer to pages 8-32 thru 8-33 for alloy tolerances. Note, sizes not listed above can be cut from plate.

AISI 4140 Steel - Delivered Nationwide by West Yorkshire ...

AISI 4140 steel stockholders and suppliers, delivering to the whole of the UK. AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130 but with a slightly higher carbon content. The higher carbon content of AISI 4140 gives greater strength and heat treatment capabilities ...

4140 Steel Plate Supplier Exporter Singapore,4140 Steel ...

Hardening of AISI Alloy Steel 4140. AISI alloy 4140 steel bar, plate and square can be hardened by cold working, or heating and quenching. SAE 4140 alloy steel is usually supplied ready heat treated to hardness in 18-22 HRC. If further heat treatment is required, then heat to 840 oC – 875 oC, hold until temperature is uniform throughout the ...

4140 Steel | Alloy 4140 Round Bar 4140 Plate Supplier Tubing

4140 Steel is available for order in round bar, plate, flat bar tubing and hex bar. Having trouble sourcing 4140 in any form, call Michlin Metals today!

ALLOY STEEL PLATES - Alloy 4340 Steel Plate Manufacturer ...

Simplex Metal & Alloys is a huge exporter of Alloy Steel 4140 Plates in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.. Alloy Steel 4140 Plate Specification: Range : 5 mm To 100 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75.

4140 Steel Plate | Precision Grinding, Inc.

4140 alloy steel is a low alloy steel that contains chromium, molybdenum, and manganese. Because it contains chromium and molybdenum it is sometimes referred to as chromoly steel. It has high fatigue strength, excellent strength to weight ratio, abrasion and impact resistant, good ductility, and has excellent torsional strength.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.