Tel: +86-371-86151827

ss 400 l2u plate

Steel grade:ss 400 l2u plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ss 400 l2u plate Introduction

JIS G3101 SS 400 steel plate standard, specification and ...

SS400 is one of the most commonly used hot rolled general structural steel.SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.

400 Series Stainless Steel - Penn Stainless Products ...

400 Series Stainless. The 400 series group of stainless steels has an 11 percent chromium and 1-percent manganese increase, above the 300 series group. The 400 series is susceptible to rust and corrosion under some conditions. Heat-treating will harden the 400 series. ... Stainless Steel 400 Series Products; Stainless Steel Plate:440C Stainless Steel · 416 Stainless Steel · Stainless Steel Bar · 300 Series Stainless

SS- 400 L2U Active PFC F0 - Sea Sonic

SS- 400 L2U Active PFC F0. The Seasonic industrial power supplies with 80 PLUS® Gold efficiency rating achieve up to 90 % efficiency at 50 % load at 115 V AC input. These L2U models are protected against short circuit, over voltage and over power surges …

JIS G3101 SS400 Structural Carbon Steel Plate Specification

JIS G3101 SS400 is one of the most common carbon structural steel grade, other grades of JIS G3101 are ss330, ss490, ss540. Related product type includes steel plate…

SS400,SS400 STEEL,SS400 PLATE - Mild steel plate ...

Common carbon structural steel plate SS400 is most used by tank manufacturers all over the world.The equivalent steel grades are ASTM A36 carbon steel plate,Din 17100 St37-2 structural steel plate,GB Q235B carbon steel plate.Now Xinsteel’s rolling range for mild steel plate SS400 is thickness from 2mm to 650mm,width from 1200-4000mm and length from 3000mm-18000mm.For the thick steel plate of ...

SS400 steel plate - BEBON INTERNATIONAL

SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.When customers order SS400 steel plate from us,our mill should be roll them completely according to JIS3101 ...

MetalsDepot® - AR400 Plate | Abrasive Resistant Plate ...

AR400 F Steel Plate is formable grade of Abrasive Resistance Steel Plate designed to accomodate applications where a life of wear is the primary cause for failure among other grades of steel plate.AR400 abrasive resistance steel plate is intended for higher, impact, wear applications where cold-bending and very good weldability is important.

SS- 400 L2U Active PFC F0 - Sea Sonic

SS- 400 L2U Active PFC F0. The Seasonic industrial power supplies with 80 PLUS® Gold efficiency rating achieve up to 90 % efficiency at 50 % load at 115 V AC input. These L2U models are protected against short circuit, over voltage and over power surges …

Mild Steel SS400 Plates Supplier, MS SS400 Cold Rolled ...

Mild Steel SS400 Plates Manufacturer. Marc Steel is a known trader and supplier of SS400 Plates, which has supreme quality, sturdy construction, high strength, flawless finish and excellent resistance to corrosion.We are one of the reliable companies in this domain and are into providing SS400 Sheets. We are also the leading manufacturers and exporters of the industry, offering a wide array of ...

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Stainless Steel Plate. Penn Stainless Products stocks over 30 grades of stainless steel plate–in 300 series stainless, 400 series stainless, high temperature stainless grades, precipitation hardening, duplex stainless steel grades and some nickel alloys.

ss 400 steel plate - alibaba

Alibaba offers 5,518 ss 400 steel plate products. About 70% of these are stainless steel sheets, 2% are steel sheets, and 1% are dishes & plates. A wide variety of ss 400 steel plate options are available to you, such as astm, aisi, and jis.

Seasonic SS-400L2U Active PFC 400W 2U Power Supply, 80 ...

SS- 400 L2U Active PFC F0 The Seasonic industrial power supplies with 80?PLUS? Gold efficiency rating achieve up to 90 % efficiency at 50 % load at 115 V AC input. These L2U models are protected against short circuit, over voltage and over power surges …

AR400 Steel Plate - Tensalloy™ AR400 Armor Plate | Clifton ...

If superior resistance against wear and impact is an important factor in your steel plate applications, then Clifton Steel’s Tensalloy™ AR400 steel fills the bill. Its abrasion resistant properties ensure that it performs consistently each and every time … with no surprises.

What Is SS400 Steel? | Reference

reference› Building MaterialsWhat Is SS400 Steel? Home Home & Garden Home Maintenance Building Materials According to Material Grades, SS400 steel is defined in JIS G 3101 standard, which is a Japanese material standard for general structural usage, sheets, strips and rolled steel plates.

400 Series Stainless Steel - Atlantic Stainless

The 400 series group of stainless steels typically have an 11% chromium and 1% manganese increase, above the 300 series group. This stainless steel series tends to be susceptible to rust and corrosion under some conditions although heat-treating will harden them.[PDF]

JIS G3101 SS400 steel plate/sheet for general purpose ...

regard SS400 steel plate/sheet for general purpose structural steel . JIS G3101 SS400 is a technical delivery conditions for general purpose structural steel .JIS G3101 SS400 is a type of steel sheet under JIS standard which is used to build ship, bridge, belongs to high strength sheet.

Stainless Steel Swagelok Tube Fitting, Union Tee, 1/4 in ...

Stainless Steel Swagelok Tube Fitting, Union Tee, 1/4 in. Tube OD. Internet Explorer 8 or 9 is not supported by this website. ... SS-400-3 Please enter or update the user part number and a comment (optional). Any updates you make will overwrite existing information. ...

AR400 Plate - Abrasion Resistant Plate | Specialty Steel Co.

We stock AR400 Wear Plate in sizes from 1/8″ thick up to and including 4″ thick. Call or Email Us For a Free Quote. This material is an Abrasion Resistant, Thru-Hardened, Alloy Wear Plate. Hardness range of this formable wear plate is 360-440 BHN. Stocking inventory includes 48″ x 96″ up to 96″ x 288″.

Rhino-Tuf® EZ | AR400 Plate | Associated Steel Corporation

Do not settle for other plate products that only offer a surface hardness or that “shock” the plate to hardness with no depth of hardness. Rhino-Tuf EZ is engineered to replace most other commercial grade abrasion resistant plate products including, but not limited to: HSLA, T-1, A36, AR360, AR400 and A514.

IBM System Storage TS3100/TS3200 Tape Library Models L2U ...

The IBM System Storage™ TS3100 Tape Library Model L2U Driveless and the IBM System Storage TS3200 Tape Library Model L4U Driveless are designed to offer high capacity, enhanced performance, and technology for the midrange open systems environments. The products are included as part of the IBM System Storage tape library family of offerings.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.