Tel: +86-371-86151827

12 meter formed u type steel sheet with reasonable price

Steel grade:12 meter formed u type steel sheet with reasonable price

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

12 meter formed u type steel sheet with reasonable price Introduction

Hot Rolled U shaped S355jr Steel Sheet Pile - w3s.in

Hot Rolled Steel Sheet Pile, Hot Rolled Steel Sheet Pile ...A wide variety of hot rolled steel sheet pile options are available to you, such as aisi, astm, and gb. You can also choose from cold rolled, hot rolled. As well as from free samples, paid samples. There are 3,020 hot rolled steel sheet …

Steel Sheet Piling Cost and Bidding [iSheetPile] - Think ...

Steel Sheet Piling Cost and Bidding Getting the Most Competitive Bids In order to secure a competitive bid for the sheet piling portion of your job, you must ensure that your design engineer properly outlines the strength parameters of the job and the required design life.

Steel Sheet Piling Prices,Sheet Piles For Sale,Sheet Pile ...

China Shunli Steel Piling is the largest sheet pile manufacturer/supplier in the world .wholesale various high quality sheet piling prices products from shunli sheet piling suppliers and steel sheet piling for sale. Including steel sheet piles wall,cold formed steel sheet piles.Shunli Sheet Piles for sale around the world.We are also trench sheet piling and Omega steel pile manufacturers,U/Z ...[PDF]

PRODUCTS HANDBOOK Structural Steel - consteel.sg

(1997) pipes, Steel Sheet Piles to EN 10248:1996 and Other Steel Sheet Piles. Figure 1 – Effect of cold working on material properties for cold formed hollow sections _ 14 Figure 2 – Comparison of corner radius of hot finished and cold formed hollow sections _ 14

Steel Sheet Piles at Best Price in India

Steel Sheet Piling Solutions India offers both hot-rolled and cold-formed sheet piling. Hot-rolled steel is rougher than cold-rolled steel. It is obtained by profiling the steel with high temperatures during the rolling process. Hot-rolled steel is available in larger steel thicknesses than cold-formed steel: thicknesses up to far above 12mm are

MetalsDepot® - Buy Steel Sheet Online - Any Quantity, Any ...

C1008/1010 HR Steel Sheet - (ASTM A1011, A569) Hot Rolled Steel Sheets are the most economical steel sheets available for a wide variety of applications. HR Steel Sheets are easy to weld, form and drill, and has a slight grainy surface.[PDF]

JFE Steel Sheet Piles

the reader’s risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of information conta ined herein. The information in this publication is subject to change or modification without notice.

U Type Steel Channel, U Type Steel Channel Suppliers and ...

Alibaba offers 2,059 u type steel channel products. About 41% of these are steel channels, 6% are metal building materials, and 1% are steel angles. A wide variety of u type steel channel options are available to you, such as astm, aisi, and din.[PDF]

Cold-Formed Steel Profile (Updated in 2010)

Cold-Formed Steel Profile (Updated in 2010) installation standards. As a result, additional ANSI-approved de-sign standards, such as the Standard on Cold-Formed Steel Fram- ing—General Provisions, —Truss Design and —Header Design, were developed and published in 2001.

Sheet Metal at Lowes - Lowe's Home Improvement

Shop sheet metal in the structural hardware section of Lowes. Find quality sheet metal online or in store.[PDF]

Steel Sheet Sheathing Options for CFS Framed Shear …

ii Steel Sheet Sheathing Options for CFS Framed Shear Wall Assemblies Providing Shear Resistance PREFACE The North American Standard for Cold-Formed Steel Framing - Lateral Design, AISI S213-07, provides design provisions for cold-formed steel framed shear walls with steel sheet sheathing.

Sheet Piling Prices, Wholesale & Suppliers - Alibaba

Looking for affordable sheet piling prices? 1,266 low price sheet piling products from 422 trustworthy sheet piling suppliers on Alibaba. Reach out to suppliers directly and ask for the lowest price, discount, and small shipping fees.

China Steel Pile, Steel Pile Manufacturers, Suppliers ...

Buying or selling minerals has never been easier! If you are about to import Steel Pile, you can compare the Steel Pile factories and manufacturers with reasonable price listed above. More related options such as steel sheet pile, steel, building material could be your choices too.[PDF]

Hot-Rolled Steel Sheets and Coils

Our Hot-Rolled Steel Sheets and Coils are applied to a wide range of uses such as, automobiles, electrical appliances, construction materials, containers, and steel pipes, and receive high acclaim from our customers for its excellent quality.[PDF]

PRODUCTS HANDBOOK Structural Steel - …

(1997) pipes, Steel Sheet Piles to EN 10248:1996 and Other Steel Sheet Piles. Figure 1 – Effect of cold working on material properties for cold formed hollow sections _ 14 Figure 2 – Comparison of corner radius of hot finished and cold formed hollow sections _ 14[PDF]

Cold-Formed Steel Profile (Updated in 2010)

Cold-Formed Steel Profile (Updated in 2010) installation standards. As a result, additional ANSI-approved de-sign standards, such as the Standard on Cold-Formed Steel Fram- ing—General Provisions, —Truss Design and —Header Design, were developed and published in 2001.[PDF]

STATE STEEL CATALOG

State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories and state-of-the-art equipment which make our products and services readily available throughout our …[PDF]

Steel Sheet Piles

3) Maximum deflection on the length of the pile. The maximum length for this U-type pile is usually between 25 to 31 metres, but longer lengths can be supplied. The piles can on request be delivered with flame cut handling holes, 50mm diameter, located in the centre of the pan at 200-250 mm from the end.

Stainless Steel Sheet-Type 304-Type 316 - Cut2Size Metals

Stainless steel sheet is available in Type 304 and Type 316. Type 304 can be easily roll-formed or bent, and its excellent corrosion resistance and weldability make it one of the most popular grades. Type 316 is a high corrosion resistance alloy, providing greater resistance to pitting-type corrosion.

Wholesale ss304 stainless steel sheet plate price - w3s.in

Sheet Prices Ss304, Wholesale & Suppliers - Alibabass 904l plate sheet astm 202 ss sheet 347h ss sheet price stainless steel sheet ss202 sheet ss304 316 ss sheet price 0cr18ni9 ss sheet price of ss 304 ss steel sheet ss 304 price india stainless steel ss304 sheets on ss 316l ss sheet a&c ss belgium stainless steel suppliers guangzhou ss 12 316 ss japan ss ss-32 ss fashion price ss[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Cold-Rolled Steel Sheets and Coils are extensively used as basic materials in automobiles, electrical appliances, steel office equipment, various types of ... Pig iron is formed by a chemical reaction of sinter and coke in the blast furnace. Then, in order to meet our customers’ ... 12 13 Type Classification Tension Test Bending Test* 4

MONTHLY SPECIALS | Elco Steel

monthly specials VALID WHILE STOCKS LAST ! ALL PRICES ARE INCLUSIVE OF 15% VAT.E & O E.PRICES SUBJECT TO CHANGE DUE TO NATIONAL STEEL PRICE INCREASE!PLEASE NOTE DELIVERIES HAVE TO BE OVER R600.00 TO QUALIFY FOR FREE DELIVERY.

Hot Roll Steel Rectangular Tube | Midwest Steel & Aluminum

Hot Roll Steel Rectangular Tube. Structural steel tube ASTM A500 Grade B is cold formed, electric-resistance welded tubing. It has a high strength-to-weight ratio, is relatively low in cost and is easily welded. Hot Roll Rectangular Tube. The hollow shape offers good appearance and ease of maintenance.[PDF]

AISI Manual Cold-Formed Steel Design 2002 Edition

Preface i PREFACE The 2002 edition of the Cold-Formed Steel Design Manual consists of six Parts.This information is supplemental to the 2001 edition of the North American Specification for the Design of Cold -Formed Steel Structural Members.Each part in the Design Manual should be used in conjunction with the Specification, Commentary and the other parts, where appropriate.

Structural Steel Vs. Formed/Welded Steel Plates: A ...

Sep 25, 2015· Structural Steel Vs. Formed/Welded Steel Plates: A Comparison Of Strength And Design Published on September 25, ... The I-beam on the left is a W 12 X 30 and the beam on the right is a welded 3/8 ...[PDF]

We stock, distribute and add value to Steel Coil • Plate ...

We stock, distribute and add value to Steel Coil • Plate • Sheet • Structural Profiles ... • CHROMADEK® Sheet and Colour Chart Page 12 • CHROMAPREP® Sheet Page 13 • Expandable Metal Page 14 • Open Sections: Cold Formed Steel Sections Page 15 ... MAXIMUM COIL WIDTH IS 2.0 meter Other grades available on request GALVANIZED COILS ...

Stainless Steel Sheets for Sale - 304, Cold Rolled 2B & #4 ...

304 Stainless Steel sheets and plates are available in several finishes, but the most common are 2B (milled) finish, #4 finish (brushed) and Chrome #8 (mirror finish) is also readily available. 2B is a milled finish that is dull grey and semi-smooth to the touch.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.