Tel: +86-371-86151827

high carbon steel sheets 52100 steel in france

Steel grade:high carbon steel sheets 52100 steel in france

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

high carbon steel sheets 52100 steel in france Introduction

52100 Info - AKS™ - 52100 Steel - Alpha Knife Supply

52100 is An excellent high carbon steel. It is one of my favorites. 52100 was developed for use as industrial bearings and has excellent wear resistance and strength. 52100 makes an excellent knife as a monosteel or it can be san mai welded with other steels such as 410 or 416 stainless.Blade Materials · G10 & Micarta · Hardware

high carbon 52100 steel sheet with high strength - w3s.in

high carbon steel sheets 52100 - natural-elements-online. 52100 Info - AKS™ - 52100 Steel - Alpha Knife Supply. 52100 is An excellent high carbon steel. It is one of my favorites. 52100 was developed for use as industrial bearings and has excellent wear resistance and strength. 52100 makes an excellent knife as a monosteel or it can be san ...

52100 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 52100 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Alloy Steel 52100 Forging Facts & Characteristics | All ...

General characteristics of Alloy Steel 52100. Alloy 52100 is a high – carbon, chromium – bearing steel with excellent strength and fatigue properties.

Alloy Steel 52100 - Continental Steel & Tube Company

Alloy Steel 52100. Alloy Steel 52100, as known as AISI 52100, contains a high level of carbon and chromium. This alloy offers users good machinability, as well as forming through conventional methods. The hardening of Alloy Steel 52100 can be achieved by cold working, heating, and quenching. To be sold as Alloy Steel 52100 must contain specific...

AISI 52100 Bearing Steel - Special steel china supplier ...

more 16 years experience in AISI 52100 steel plate, round bar, flat bar, square bar, pipe/tube supply. AISI 52100 bearing steel is a high quality Alloy Bearing steel, It belong to a high carbon, chromium containing low alloy steel.. 52100 Oil Quenched & Tempered Hardenss is 28-34 HRC. AISI 52100 steel Annealing delivery hardenss less than 250HB.

ASTM 52100 Bearing Steel | 100Cr6 | SUJ2 | EN31 - Otai ...

ASTM 52100 Bearing Steel | 1.3505 | 100Cr6 | SUJ2 | EN31. ASTM A295 is specification which covers 52100 high carbon bearing quality steel to be used in the manufacture of anti-friction bearings. And 52100 bearing steel is the most common steel grade in ASTM A295 standard for high-carbon anti-friction bearing steel.

Buy 52100 Carbon Steel - hopkinsplasticsurgery

AISI/ASTM 52100 bearing steel is a high carbon, chromium containing low alloy steel that is through hardening and noted in particular for use as bearings. 52100 bearing steel is one kind of special steel with features of high wear resistance and rolling fatigue strength.

52100 Alloy Steel - Knife Blade Steels FAQ

AISI 52100 Alloy Steel. Manufacturer: Various 52100 is an alloy steel that is commonly used in ball bearings. Incidentally, it is also an excellent knife steel, with possibly the best performance out of many of the tool/carbon steels and reaches hardness of about RC 66, with typical knives usually in the high 50's.

High Carbon Blade Steels - Knife Steel - Mosaic Pins

CPM REX M4 HC(HS) is a high vanadium special purpose high speed steel exhibiting better wear resistance and toughness than m2 or m3 in cold work punches, die inserts and cutting applications involving high speed and light cuts. The high carbon (HC) modification to standard M4 is designed to provide optimum hardening response in larger cross ...[PDF]

Technical Information: 52100 - SB Specialty Metals

52100 is an oil hardening, high carbon steel. 52100 is characterized by high hardness and moderate wear resistance 52100 is used in bearing applications and cold work tooling applications Typical hemical omposition arbon 1.00% hromium 1.50% ... Technical Information: 52100.

high carbon steel sheets 52100 - natural-elements-online

52100 Info - AKS™ - 52100 Steel - Alpha Knife Supply52100 is An excellent high carbon steel. It is one of my favorites. 52100 was developed for use as industrial bearings and has excellent wear resistance and strength. 52100 makes an excellent knife as a monosteel or it can be san mai welded with other steels such as 410 or 416 stainless.

Detail 52100 Kitchen High Carbon Steel Knife Blade Blank ...

ebay› …› Modern Fixed Blade› Custom & HandmadeWe also make blades in high-carbon alloy steel,1095, 52100 bearing steel and ATS 34 stainless steel. We grind blades from 1/2" to 40" long. Our blades are Mar-Quenched in our state-of-the-art heat treating system for 20% greater toughness and superior edge holding. | eBay!Seller Rating: 100.0% positive

Buy 52100 Carbon Steel - hopkinsplasticsurgery

AISI/ASTM 52100 bearing steel is a high carbon, chromium containing low alloy steel that is through hardening and noted in particular for use as bearings. 52100 bearing steel is one kind of special steel with features of high wear resistance and rolling fatigue strength.

SAE 52100 steel - steel-grades

Datasheet for:Steel Grades:Carbon Steel:SAE 52100. ... High strength after cold forming, but elongation than 1 cr17ni7 slightly worse. ... SAE 52100 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

O1 vs 52100 Is the latter that much better? | BladeForums

bladeforums› …› General Knife Maker's DiscussionOct 04, 2001· O1 is a very good steel and is used to make some great knives, but to me many other carbon steels are as good and maybe better. This is something I can not say about 52100. I don't think that the perfect knife steel has come along yet, but until it does 52100 will do just fine for me.

52100 / E51200 Bearing Steel, High Carbon-Chromium | …

High carbon, high chromium, aircraft quality bearing steel. This material develops high hardness, and exceptional resistance to wear and abrasion. In smaller sections it has a high compression strength. Furnished in the spheroidized annealed condition in order to provide the best possible machinability. 52100 Vac Melt E52100. Applications

52100 Alloy Steel - Knife Blade Steels FAQ

AISI 52100 Alloy Steel. 52100 is an alloy steel that is commonly used in ball bearings. Incidentally, it is also an excellent knife steel, with possibly the best performance out of many of the tool/carbon steels and reaches hardness of about RC 66, with typical knives usually in the high 50's. 52100 is one of my personal non-stainless favourites,...

high carbon steel sheets 52100 - natural-elements …

52100 Info - AKS™ - 52100 Steel - Alpha Knife Supply52100 is An excellent high carbon steel. It is one of my favorites. 52100 was developed for use as industrial bearings and has excellent wear resistance and strength. 52100 makes an excellent knife as a monosteel or it can be san mai welded with other steels such as 410 or 416 stainless.

steel sae 52100 - hopkinsplasticsurgery

AISI/ASTM 52100 bearing steel is a high carbon, chromium containing low alloy steel that is through hardening and noted in particular for use as bearings. 52100 bearing steel is one kind of special steel with features of high wear resistance and rolling fatigue strength.

52100 Mod.3 steel - steel-grades

52100 Mod.3 This page provides 52100 Mod.3 datasheet, 52100 Mod.3 mechanical properties, chemical element 52100 Mod.3, technical specifications of 52100 Mod.3 steel material properties. 52100 Mod.3 performance specifications.

52100 as a blade steel? - Knife Making - I Forge Iron

Dec 07, 2017· How does 52100 compair to other alloy steels as a blade steel for edge holding, appearence, and ease of working? Ive noticed that it seems less popular than some of the other steels of similiar composition. It compositon with approx 1% carbon and …

High Carbon Blade Steels - Knife Steel - Mosaic Pins

CPM REX M4 HC(HS) is a high vanadium special purpose high speed steel exhibiting better wear resistance and toughness than m2 or m3 in cold work punches, die inserts and cutting applications involving high speed and light cuts. The high carbon (HC) modification to standard M4 is designed to provide optimum hardening response in larger cross ...

52100 is a high carbon, chromium containing low alloy ...

Product Code: 52100 Description 52100 TOOL STEEL. .177" X 2.68" Has a slight bend in it due to being on a coil, so if grinding this for blades it will need to be straightened.

52100 | NJ Steel Baron

This 52100 is clean and is my absolute favorite high carbon steel to work and make large Kitchen/Chef’s knives. It is easy to get consistent heat treating results and is …[PDF]

ATA SHEET - Alpha Knife Supply

LESCALLOY 52100 VAC-ARC steel is a deep hardening alloy steel used for aircraft bearings and other high stressed parts where good rolling contact fatigue strength is required at operating temperatures below 400°F oundness over conventionally air melted bearing quality SAE 52100 steel.[PDF]

Equivalent Grades ALLOY STEEL - 4.imimg

HIGH CARBON STEEL Internal Standard Equivalent Grades EN SAE/AISI JIS*** PC77 - 1075 SWRH77B ... EN31 534A99/535A99 100Cr6 103Cr1 EN31 52100 COLD HEADING QUALITY STEEL - CHQ Internal Standard Equivalent Grades ... CARBON STEEL USA Japan Germany U. K. France Italy Spain Sweden China AISI/SAE JIS W.-nr.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.