Tel: +86-371-86151827

high strength steel plate steels

Steel grade:high strength steel plate steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

high strength steel plate steels Introduction

High Strength Plates - Official Site

High Strength Plates & Profiles Inc. is a global leader in the processing of high strength and abrasion resistant steel. We offer one stop shopping for high strength and abrasion resistant steel from full plates to finished parts. Founded in 1985, we have over 5000 tons of …Contact · Processing · Products · Tech Support · Standards · Profile Video

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel.HSLA steels vary from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties.Classifications·

MetalsDepot® - High Strength Steel Plate - Buy Online!

Shop Online for - Impact Resistance A514, T1 steel plate, Pressure Vessel Quality A516 steel plate, High Strength A572 steel plate, A588 Corten weathering steel plate, Abrasive Resisting AR400 steel plate, and Military Grade 46100 Armor Plate. Metals Depot's High Strength steel plates are ideal for a wide range of structural projects, machinery ...

High strength steels | Industeel

High strength steels. Industeel offers a complete range of high strength steel plates including all the main grades commonly found on the market (690, 890, 960 and 1100 MPa). The quenched and tempered steel combines high yield strength and toughness and are used for the construction of stationary and mobile equipment subjected to heavy loads.

High Strength Steels - Associated Steel

High Strength Steels Kromite® #3 4140/4150 (modified) Hot Roll, Heat Treated, High Strength Alloy. Kromite #3 is a modified 4140/4150 steel. Typical hardness is Rockwell “C” 28/34. This chromium and molybdenum based alloy is electric furnace melt, vacuum degassed, stress relieved, and …

High Strength Steels - Associated Steel

Mirraloy FM is a high strength micro-alloyed, free machining carbon steel. Typical tensile strength 133,000 PSI. This steel shaft offers both a high degree of machinability, like a carbon steel, but has the strength consistent with an alloy steel. It does not exhibit hard and/or soft spots similar to what is seen in most carbon steels.

High Strength Steels - Associated Steel

High Strength Steels Kromite® #3 4140/4150 (modified) Hot Roll, Heat Treated, High Strength Alloy. Kromite #3 is a modified 4140/4150 steel. Typical hardness is Rockwell “C” 28/34. This chromium and molybdenum based alloy is electric furnace melt, vacuum degassed, stress relieved, and …

MTL Advanced | High Strength Steels Supplier

We can fully process high strength steels in our 30,000 sq. ft. manufacturing facility. It houses an extensive range of equipment, allowing us to offer four methods of cutting, press braking, CNC machining, fabrication and assembly. High strength steel structures can be used to replace mild steel grades, allowing for the structure to be made ...

High Strength Low Alloy Steel Plate - INFRA-METALS

The atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon steels with or without copper addition. ASTM A514 – Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding.

High strength steels | Industeel

High strength steels. Industeel offers a complete range of high strength steel plates including all the main grades commonly found on the market (690, 890, 960 and 1100 MPa). The quenched and tempered steel combines high yield strength and toughness and are used for the construction of stationary and mobile equipment subjected to heavy loads.

Buy High Strength Low Alloy Plate From Top Steel Supplier ...

16 mn is a major steel grade of high strength low alloy steel plate in most industries, The consumption of this type is very large. Its intensity is higher than the ordinary carbon structural steel Q235 by 20% ~ 30%, atmospheric corrosion resistance by 20% ~ 38%. 15 MNVN is mainly used as medium strength steel plate. It is featured with high ...

About SSAB - SSAB high-strength steel - sheet, plate, coil ...

SSAB develops high-strength steels and provides services for better performance and sustainability. The company is a leading producer on the global market for Advanced High-Strength Steels (AHSS) and Quenched & Tempered Steels (Q&T), strip, plate …

HIGH STRENGTH - High Strength and Abrasion Resistant Steel ...

High Strength Plates & Profiles Inc. has an extensive stock of high strength and abrasion resistant plate and sheet in thicknesses from 3mm to 6" thick. W e carry stock from Essar Algoma, the only Canadian producer of heat treated steel.

High Strength and Ultra High Strength Steel Sheet and ...

alform® High Strength and Ultra high Strength Sheet and Plate. steels are thermo-mechanically rolled, weldable fine grain structural steels with excellent cold-forming behaviour, perfect for applications wherever high plasticity coupled with high strength and light-weight design are in demand.[PDF]

High-Strength Low-Alloy Steels - ASM International

beams and panels are additional uses of these steels. The choice of a specific high-strength steel depends on a number of application requirements including thickness reduction, corrosion resist-ance, formability, and weldability. For many applications, the most impor-tant factor in the steel selection process is the favorable strength-to-weight

Structural Steel, high strength & durable | AJ Marshall

Structural steel or high strength is an extremely tough and durable material. It helps to improve the performance and safety of vehicles and structures where weight saving is required. It is most commonly used to make heavy road vehicles, dumper bodies or chassis (the framework of a vehicle).

High Strength Carbon and Low Alloy Steels | ispatguru

Fig 1 Classification of high strength carbon and low alloy steels. The four types of high strength steels have some basic differences in mechanical properties and available product forms. In terms of mechanical properties, the heat treated low alloy steels offer the best combination of strength …

A588 plate, A709-50W, A242, high strength corrosion ...

High Strength Weathering Steel Plate. ASTM A588, A242 and A709-50W are considered the ASTM equivalents to Cor-Ten® in steel plates. Available in various stock sizes per chart below

High Strength Low Alloy Steel - imoa.info

This has led to unprecedented steel innovation to produce alloys with high strength and good cold formability. Today, the body of a passenger car contains up to 80% high- strength steel, the majority of which is traditional (ferritic, ferritic-pearlitic or bainitic) HSLA steel and an increasing share is multiphase steel.

High-strength plates - Voestalpine

We deliver high-strength heavy plates as fine-grained steels with a minimum yield strength of 620 and 700 MPa and ultra-high-strength heavy plates with a minimum yield strength of 900, 960 and 1100 MPa as special voestalpine grades. alform plate 620 M – thermomechanically rolled, high-strength fine-grained steels

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.