Tel: +86-371-86151827

carbon steel grade 8 8 blue plate pt screws

Steel grade:carbon steel grade 8 8 blue plate pt screws

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

carbon steel grade 8 8 blue plate pt screws Introduction

High Tensile Bolts 8.8, Grade 8.8 Studs, Alloy Steel High ...

We offer these 8.8 Grade Bolts in a wide range of standards and sizes to fit the requirements of all our customers. Alloy Steel High-Tensile Class 8.8 Bolts, Grade 8.8 High Tensile Screws, High Tensile 8.8 Studs, ASTM F568 High Tensile Bolts 8.8, Grade 8.8 Bolts Stockist, High Tensile Bolts …

What is 8.8 grade steel and what is it used for? - Quora

Anyways I assumed that you want to know about which steel is being used for bolts with this specification. The grading system ‘ASTM F568M’ is the system used as international standard for nuts, bolts, screws. You can read more about it here: ASTM F568M. According to the specification, the 8.8 grade bolt uses Low Carbon Boron Steel: in ...[PDF]

Fastener Basics - Bolt Depot - Nuts and Bolts, Screws and ...

Low Carbon Grade 5 Grade 8 Class 8.8 Class 10.9 Class 12.9 US bolt head markings Metric bolt head markings 8.8 10.9 12.9 Hex bolts, or hex cap screws, are used in machinery and construction. Can be used with a nut, or in a tapped hole. Fully threaded hex bolts are also known as tap bolts. Wood screws have large threads and a smooth

Carbon Steel Bolts in ASTM A307 (Grades A and B) | Glaser ...

Carbon Steel Bolts in ASTM A307 (Grades A and B) Carbon and Alloy Steel Nuts in ASTM A563; Medium Carbon Steel Bolts in SAE J429 (Grades 2, 5 and 8) Bolts in ASTM F1554 (Grades 36, 55 and 105) Bolts in ASTM A193 and Nuts in ASTM A194 (All Grades) Bolts and Nuts in Alloy 20 (Carpenter 20) Stainless Steel Bolts in ASTM A276 (300 & 400 Series)

Amazon: wing bolts

amazon› Search› wing boltsCarbon Steel. Cast Iron. Ceramic. Copper. EPDM Rubber (Ethylene Propylene Diene Monomer) Felt. ... Grade 8. Grade 8M. Grade 9. Grade A. Grade A325. Grade B16. Grade B6. Grade B7. Grade B8. Grade B8M. Grade C. Grade DH. ... Ruiling 10 Pack Wing Bolt Sets M6 30mm Carbon Steel Zinc Plated Butterfly Screw Hex Nut. by Ruiling. $9.99 $ 9 99 Prime ...

Medium Carbon Steel Bolts in SAE J429 (Grades 2, 5 and 8 ...

Grade 5 – bolts manufactured from medium carbon steel. Grade 8 – bolts manufactured from medium carbon alloy steel. The properties tables below provide more information on the differences between the grades. Applications . SAE J429 bolts from Glaser and Associates meet the mechanical and material requirements for fasteners used in the ...

carbon screws | eBay

ebay› Search› carbon screwsFind great deals on eBay for carbon screws. Shop with confidence. Skip to main content. eBay Logo: ... 273 product ratings - Plastic Carbon Fiber Style License Plate Frames For Front & Rear Bracket 2pc Set. $9.99. FAST 'N FREE. ... M6x17mm Hex Flange Bolts Left Hand Thread 8.8 Grade Carbon Steel Black 2pcs See more like this.

Guide to Fastener Materials - Screws, Nuts, Bolts, Washers

Guide to Fastener Materials. Note: Steel low-carbon is generally the default steel selection when no other steel grade is specified, or when no higher grade steel is required.Please check your application needs if you are not certain. Mechanical Guidelines for Fasteners - Screws, Nuts, Bolts, Washers, Pins

Medium Carbon Steel Bolts in SAE J429 (Grades 2, 5 and 8 ...

Grade 5 – bolts manufactured from medium carbon steel. Grade 8 – bolts manufactured from medium carbon alloy steel. The properties tables below provide more information on the differences between the grades. Applications . SAE J429 bolts from Glaser and Associates meet the mechanical and material requirements for fasteners used in the ...

What is 8.8 grade steel - Answers

answers› …› Elements and Compounds› Metal and AlloysLastly, the actual steel grade used by manufacturers may vary but in most cases, a grade 8.8 fastener (self-colour, black-oxide or zinc plated) will be manufactured from a medium-alloy medium ...

Hex Head Cap Screws Grades 2, 6, 8 - AFT Fasteners

Grade-2 Hex Cap Screws . Grade-2 hex cap screws are made from a low or medium carbon steel and is an economical choice for use in non-critical applications where the screw is not subject to extreme temperatures or stress. Grade-5 Hex Cap Screws . Grade-5 hex cap screws are made from medium carbon steel and heat-treated.[PDF]

Fastener Identifi cation Markings: ASTM, SAE, ISO

Fastener Identifi cation Markings: ASTM, SAE, ISO Identifi cation Grade Mark Specifi cation Fastener Description Material Nominal Size Range (in.) Mechanical Properties Proof Load (psi) Yield Strength Min (psi) Tensile Strength Min (psi) No Grade Mark ISO R898 Class 5.8 Bolts, Screws, Studs Medium Carbon Steel, Quenched and Tempered All ...

Carbon Steel

LOW CARBON STEEL: Generally they contain less than 0.25% carbon. SAE Grade 2 (Metric class 4.6,4.8 & 5.8) fasteners are made with AISI grades 1006, 1010, 1016, 1018, 1022 & 1035 being low carbon …

Carbon Steel Machine Screws - Screws - Grainger Industrial ...

Searching for Carbon Steel Machine Screws? Grainger's got your back. Easy ordering & convenient delivery. Log-in or register for your pricing. ... #10-32 Machine Screw, Carbon Steel, 3/8" L, 100 PK Brand FABORY Item # 1NA23 Mfr. Model # U24212.019.0038. Web Price $3.85 / pkg. of 100 #4-40 Machine Screw, Carbon Steel, 1" L, 100 PK[PDF]

Technical Reference Guide - Fastenal

Technical Reference Guide Table of Contents Subject Page # Fastener Material Selection 1 ... causes the fastener to be brought past its yield point, it now enters the plastic range. Here, the steel is no ... SAE J429 Grade 2 is a low carbon steel strength grade that has improved strength characteristics due to …

Deck screws & Timber screws - Bolt Depot

Deck screws & Timber screws; Simpson® Deck screws, Square drive bugle head. A general purpose screw typically used in exterior wood to wood projects. Bugle heads are countersunk with concave sides and a flat top. Square drive is designed to reduce the risk of cam-out (stripping) and allow single-handed installation. Stainless steel 18-8

Grade 10.9 Bolts - 10.9 Screws | U-Bolt-It, Inc.

Our metric grade 10.9 bolts meet ASTM A324 grade BD and SAE J429, grade 8 standards. The yield strength of the bolts is 940 and the tensile strength is 1040 MPa. U-Bolt-It is a leading distributor and manufacturer of high quality metric grade 10.9 bolts.

Industrial Screws & Bolts | eBay

ebay› …› Industrial Fasteners & Hardware› BoltShop from the world's largest selection and best deals for Industrial Screws & Bolts. Shop with confidence on eBay! Skip to main content ... 200pcs Allen Head Socket Hex Set Grub Screw Cup Point Assortment Kit Steel. $6.95. Free shipping. Make Offer. 1496 PIECE COARSE THREAD GRADE 8 - BOLT, NUT, WASHER & LOCK WASHER ASSORTMENT ... (200x Carbon ...

EN8 Carbon Steel, 080M40 BS 970 Specification - Otai ...

EN8 Steel is Steel Grade in BS 970 1955 Specification EN8 steel grade belongs to the standard of BS 970-1955, which is a standard for wrought steel for mechanical and allied engineering purpose. In BS 970 standards, there are some other common steel grades, like EN9, EN19, EN24, EN36 etc.

Torque Information : Fuller Fasteners

DIN 931 / ISO 4014 Partially Threaded Hex Cap Screw. 8.8 Grade Bare Steel / Zinc Plated; 8.8 Grade Hot Dip Galvanized (ISO FIT) 10.9 Grade Bare Steel / Yellow Zinc Plated; 10.9 Grade Bare Steel with Extended Threads; 12.9 Grade Bare Steel; A2/A4 Stainless Steel; DIN 933 / ISO 4017 Fully Threaded Hex Cap Screw. 8.8 Grade Bare Steel / Zinc Plated

Cap Screws - GlobalIndustrial

globalindustrial› Fasteners & HardwareWe are a leading distributor of commercial and industrial equipment and MRO supplies. We carry over a million high-quality business and industrial products at low prices and provide personal service. Global Industrial has nearly 70 years expertise in meeting and exceeding our customer’s expectations. Give us …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.