Tel: +86-371-86151827

non standard used steel road plate for steel industry

Steel grade:non standard used steel road plate for steel industry

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

non standard used steel road plate for steel industry Introduction

Steel Road Plates | Traffic & Crossing Plates | NTS

NTS steel crossing plates feature hardened threaded weld nuts and engineered lifting device with an industry standard minimum safety factor of 5-to-1 to provide safe, easy lifting of the plate from either side. NTS steel road plates may be stacked flat requiring no dunnage.

Slip Resistant Road Plates | SlipNOT®

SlipNOT® road plates are ideal for high traffic areas that can become slippery with water, oil, gasoline and other substances.SlipNOT® traffic plates can be used to cover open trenches, sinkholes, and areas of road construction.They can quickly restore a job-site back to pre-project conditions by bridging open excavations and trenches dug for drainage, cables, gas mains or water mains.

Road Plates – Expert Introduction to Steel Roadway Plate ...

Steel Road Plates & Roadway Surfaces in Work Zones

Used Steel Road Plate, Used Steel Road Plate ... - Alibaba

Alibaba offers 408 used steel road plate products. About 25% of these are steel sheets, 1% are stainless steel sheets, and 1% are silicon steel. A wide variety of used steel road plate options are available to you, such as aisi, astm, and gb.

Non Slip Steel Plate | Products & Suppliers | Engineering360

globalspec› PRODUCTS & SERVICESNon - slip steel plates : For the floors or sections of floor made of steel plates, these plates shall have a non-slip surface. Iveco 90 PM 16 (4 × 4) wrecker with 5-tonne crane The deck of the subframe, which is covered with a non - slip steel plate , measures 3.4 m long and 2.3 m wide and may be used for carrying extra equipment or cargo.

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

Delta Steel, Inc. - Plate

Welcome to Delta Steel, Inc., one of the largest service centers in the southwestern United States consisting of an excellent management team and dedicated professionals throughout. We are a customer oriented company with over a 50 year history of continued growth and profitability. A deep and diverse inventory, combined with the best processing equipment in the industry, makes Delta Steel the ...

What is Flat-Rolled Steel? - Definition from Corrosionpedia

Flat-rolled steel is produced through melting and rolling. It is produced in sheet, strip and tin plate formats. It is commonly used in automotive, heavy machinery, pipes and tubes, construction, packaging and appliances. Flat-rolled steel products include slabs, hot-rolled coils, cold-rolled coils, coated steel products and heavy plates.

Road Standards and Paving Standards - ASTM International

ASTM's road and paving standards provide the specifications and test methods pertinent to the material, physical, mechanical, performance, and application requirements of road surfaces and pavements. These geotechnical surfaces are laid down on specified …

24/7 Steel Roadplate Rentals - Roadplates, Llc ...

We're not just plate guys. Over 30 years in the industry has equipped our refined staff with the contacts necessary to provide you with any and all steel/metal materials …[PDF]

Steel Plates Requirements Used in ... - Charleston, SC

• Steel plates mu st be able to withstand H-20 traffic loading without any movement. • Steel plates shall be fabricated to meet ASTM A36 steel requirements. • When two or more of plates are used, the plates shall be tack welded together at each corner to reduce or eliminate vertical movement.

Traffic Safety Equipment | National Trench Safety

Portable solar powered message boards are used in a variety of traffic control, emergency communication and sporting event applications as well as for temporary communication devices to convey your desired text to any mass audience. NTS is an authorized dealer for Solar-Tech and Wanco electronic message boards. DETAILS

What Are the Uses of Steel? | Reference

reference› ManufacturingSteel is an alloy that is most commonly used in the construction industry. It is a fundamental resource for the construction of practically all types of buildings, and necessary building parts, such as reinforcing bars for concrete, suspension cables, cladding and roofing applications, coastal and flood defense apparatuses and deck plates.

Non Slip Steel Plate | Products & Suppliers | Engineering360

globalspec› PRODUCTS & SERVICESNon - slip steel plates : For the floors or sections of floor made of steel plates, these plates shall have a non-slip surface. Iveco 90 PM 16 (4 × 4) wrecker with 5-tonne crane The deck of the subframe, which is covered with a non - slip steel plate , measures 3.4 m long and 2.3 m wide and may be used for carrying extra equipment or cargo.

Road Standards and Paving Standards - ASTM International

ASTM's road and paving standards provide the specifications and test methods pertinent to the material, physical, mechanical, performance, and application requirements of road surfaces and pavements. These geotechnical surfaces are laid down on specified …

Industrial Non Slip Coating - Superior Industries

This tough industrial non slip coating is the proven industry leader in strength and tenacity. Only Traction ProGrip 900 adheres to aluminum, concrete, steel, diamond plate, fiberglass, and other surfaces with the strength to withstand heavy industrial traffic, including steel wheel traffic.

Eddie Kane Steel - YOUR #1 SOURCE FOR STEEL PLATE

Eddie Kane Steel Products, Inc., is a steel service center and distributor of carbon and alloy steel plate. Our inventory includes hot-rolled prime and non-prime steel plate and plate products. We fabricate counterweights, original equipment manufacturer (OEM) parts, and other burn-outs.

Stainless Steel Market Size | Industry Analysis Report ...

The global stainless steel market size was valued at USD 85.45 billion in 2016 and is expected to expand at a CAGR of 5.2% over the forecast period. Increasing R&D in stainless steel manufacturing to improve durability, corrosion resistance, and strength is expected to propel growth

Home - YLS Steel Pte Ltd

YLS Steel Pte Ltd is one of the leading metal scrap recycling companies in Singapore. We operate under Union Steel Holdings Limited and provide rental services for Steel Plate and Sheet Pile.[PDF]

WELDING OPTIONS IN STEEL CONSTRUCTION

2. Structural steel grades used for Construction 2.1 Plain carbon structural steel Steel commonly known as mild steel made as per IS: 2062 Gr. A, B and C is widely used in Indian general construction sector. These steel plates have very good weldability but due to low strength relatively thick sections are required for a load bearing applications.[PDF]

Introduction to Iron and Steel

Introduction to Iron and Steel A few definitions and general descriptions are in order Alloy steel: A generic term for steels ... addition of carbon and other additives (or alloys). 8 Types of steel used in construction Structural steel—plates, bars, pipes, structural shapes. Reinforcing steel—concrete ... WSDOT Standard Specifications ...[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

its rich line-up of products, Nippon Steel & Sumitomo Metal Corporation is renowned for its coated steel sheets. Nippon Steel & Sumitomo Metal develops and markets high-performance steel materials capable of responding to increasingly stringent needs, such as …

MetalsDepot® - Buy A36 Steel Plate Online!

Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications.. Specifications: ASTM A36, AISI A-36 ; Applications: base plates, gussets, liners, road plates, trench covers, etc. Workability: Easy to Weld, Cut, Form and Machine

Steel - Wikipedia

Steel is an alloy of iron and carbon, and sometimes other elements. Because of its high tensile strength and low cost, it is a major component used in buildings, infrastructure, tools, ships, automobiles, machines, appliances, and weapons. Iron is the base metal of steel.Definitions and ...·

Silicon Steel Sheet Used, Silicon Steel Sheet Used ...

Alibaba offers 544 silicon steel sheet used products. About 44% of these are steel sheets, 6% are silicon steel, and 4% are transformers. A wide variety of silicon steel sheet used options are available to you, such as gb, aisi.

ABOUT STEEL | worldsteel

Steel is the world's most important engineering and construction material. It is used in every aspect of our lives; in cars and construction products, refrigerators and washing machines, cargo ships and surgical scalpels. It can be recycled over and over again without loss of property.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.