Tel: +86-371-86151827

alloy steel plate 13crmo4 5 for boiler as per en 10028 2

Steel grade:alloy steel plate 13crmo4 5 for boiler as per en 10028 2

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

alloy steel plate 13crmo4 5 for boiler as per en 10028 2 Introduction

EN 10028-2 13CrMo4-5|EN10028 13CrMo4-5 STEEL …

EN 10028-2 13CrMo4-5|EN10028 13CrMo4-5 STEEL PLATE. EN10028 steel grade supersedes the older BS and DIN standards (Grades BS 1501-161-360A and DIN H 1, respectively). 13CrMo4-5 steel grade is one of grade in En10028-2, which is non alloy and alloy steels with specified elevated temperature properties.

EN 10028-2 - Boiler and Pressure vessel Steel Supplier ...

Steel plate product available by EN10028-2 standard includes 5 steel grades: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10. EN 10028-2 is the European standard that specifies requirements for steel plate and sheet products for pressure equipment made of weld-able non-alloy and alloy steels with elevated temperature properties as specified.

13CRMO45 Plates, 16mo3 Metal plates, 13CRMO4-5 Plates ...

13CrMo4-5 steel plate is a kind of steel which with Cr., Mo.,Cr-Mo that mainly applied for high temperature and pressure vessels.The steel grade 13CrMo4-5 is according to EN 10028-2 standard which with the yield strength of 228MPa.The followings are the chemical composition and mechanical properties of EN 10028-2 13CrMo4-5 steel plate.

13CrMo4-5, 1.7335, A335 P11/P12 - boiler steel

13CrMo4-5, 1.7335 - Characteristics and application. 13CrMo4-5 low alloy steel is a relatively low-carbon chrome-molybdenum grade compared to other related high temperature grades, characterized by good cold and hot workingability, excellent machinability, weldability while maintaining high strength properties at room temperature and elevated temperatures.

EN EN 13CrMo4-5 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. EN 13CrMo4-5 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

13crmo4 steel - pressure-vessel-steel

With alloy Chrome and Molybadenum elements,boiler steel plate 13CrMo44 owned the minimum yield strength at 300 Mpa,and tensile strength within 440-590Mpa. ... EN 10028-2 13CrMo4-5 steel plate - steel … EN 10028-2 13CrMo4-5 steel plate/sheet for steel with Cr., Mo.,Cr-Mo steels For high temperature and pressure vessels.

13crmo45 | 13 crmo 45 | 13crmo45 Steel -Triton Alloys Inc

13crmo45 Steel Plate . Triton Alloys Inc carries one of the largest stocks of 13crmo45 Steel Plate in India ... > EN-10028-2 steel plate ... 13CrMo45 is chrome moly steel intended for use in the fabrication of weldable steel pressure vessels and boilers in elevated temperature service.

EN 10028-2 13CrMo4-5|EN10028 13CrMo4-5 STEEL PLATE ...

Find en 10028-2 13crmo4-5|en10028 13crmo4-5 steel plate here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

EN 10216 2 - Boiler and Pressure vessel Steel Supplier ...

EN10216-2 is specification made for seamless steel tubes for specified elevated temperature purposes as boiler tube, power plants, etc, it has following steel grades: P195GH, P235GH, P265GH, 16Mo3, 14MoV6-3, 13CrMo4-5, 10CrMo9-10, with non-alloy and alloy steel included. EN 10216-2 specifies the technical delivery conditions in 2 test ...

EN 10028-2 Steel Plate - Gangsteel

en 10028-2 p355gh|en10028 p355gh|p355 gh steel plate EN10028 steel grade supersedes the older BS and DIN standards (Grades BS 1501-161-360A and DIN H 1, respectively). P355GH steel grade is one of grade in En10028-2, which is non alloy and alloy steels …

Boiler steel steel,EN 10028-2 Boiler ... - steel plate BEBON

Boiler steel description Bebon Internationals high quality boiler steel plate can be found in numerous worldwide industries. It is used primarily in the fabrication of boilers in industries such as shipbuilding, petrochemical and manufacturing. Our b

13CrMo4-5,13CrMo4-5 STEEL,13CrMo4-5 PLATE

Our engineers suggest that for thickness belows and equal to 100mm,Normalized and Tempered heat treatment for 13CrMo4-5 steel,for thickness within 100-150mm,Normalized and Tempered or Quenched and Tempered are both ok,for thickness above 150mm,Quenched and Tempered are necessary.If resistance to pressurized hydrogen is of importance, a minimum content of 0,80% Cr may be agreed …

13crmo4 steel - pressure-vessel-steel

With alloy Chrome and Molybadenum elements,boiler steel plate 13CrMo44 owned the minimum yield strength at 300 Mpa,and tensile strength within 440-590Mpa. ... EN 10028-2 13CrMo4-5 steel plate - steel … EN 10028-2 13CrMo4-5 steel plate/sheet for steel with Cr., Mo.,Cr-Mo steels For high temperature and pressure vessels.

13crmo4 5 steel - pressure-vessel-steel

EN 10028-2 13CrMo4-5 steel-Katalor Industry. EN 10028-2 13CrMo4-5 is a pressure vessel steel at medium temperature. Katalor Industry has EN 10028-2 13CrMo4-5 steel in stock, any need in EN 10028-2 13CrMo4-5 ... 13CrMo4-5 alloy steel -

Alloy Steel Plates - Alloy Steel Plate SA 387 GR 12 ...

Approx. Rs 80 / Kilogram(s) Get Latest Price Sa 387 gr 11 cl. 2 grade plate ready stock equla grade to 13crmo44 alloy steel plate. CHAMPAK INDUSTRIES are one of the leading manufacturers, suppliers and exporters of 13CrMo4-5 PLATE.

EN 10028-2 13CrMo4-5|EN10028 13CrMo4-5 STEEL PLATE ...

Find en 10028-2 13crmo4-5|en10028 13crmo4-5 steel plate here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

Boiler Grade En10028 13crmo4-5 10crmo9-10 Pressure …

Find boiler grade en10028 13crmo4-5 10crmo9-10 pressure vessel steel plate here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

ASTM A283 C,ASTM A387,ASTM A516,ASTM A537,EN 10028-2…

ASTM A283 C,ASTM A387,ASTM A516,ASTM A537,EN 10028-2/3/4 BOILER STEEL PLATE. ... Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel A782(CL1.2.3) ASTM A832/A832M Standard Specification for Pressure Vessel Plates, ... Class N, Category L of EN 10029-1991 Surface Quality as per EN 10163:1991 Part 2, ...

En10028 16mo3 Boiler and Pressure Vessel Steel Plate

EN10028 16Mo3, 1.5415 Boiler and Pressure Vessel Steel Plate Grades:P265GH,P295GH,16Mo3,13CrMo4-5,10CrMo9-10 Product Description: 16Mo3 is a EN10028 specified pressure vessel grade chrome molybdenum steel alloy for use in …

EN10028-2 P295GH, P295GH STEEL-SA516GR70,SA516Gr.70 ...

EN10028-2 P295GH, P295GH STEEL; EN10028-2 P295GH, P295GH STEEL, P295GH PLATE, P295GH Mill . Unitedsteel Plant is committed to product and supply EN10028-2 P295GH, P295GH STEEL PLATE, P295GH Mill Plate as well as the equivalent grades as per ASTM, ASME, JIS , EN…

2 13crmo4 5 - pressure vessel steel plate grades

13CrMo4-5 steel plate is a kind of steel which with Cr., Mo.,Cr-Mo that mainly applied for high temperature and pressure vessels.The steel grade 13CrMo4-5 is according to EN 10028-2 standard which with the yield strength of 228MPa.The followings are the chemical composition and mechanical properties of EN 10028-2 13CrMo4-5 steel plate.

13CrMo 4-5 steel plate,13CrMo 4-5 steel price,EN 13CrMo 4 ...

13CrMo 4-5 steel plate Steel Category: Boiler vessel steel Steel standard: EN 10028-2 Steel grade: EN 10028-2 13CrMo 4-5 Dimension: Thickness 5-300mm, Width 1500-3500mm, Length 3000-12000mm Application: Mainly used to manufacture collectors, boilers and other over-heat pipe(≤530℃) 13CrMo 4-5 steel chemical composition

EN10028-2 P265GH Steel Plate supplier - Gangsteel

We export EN 10028-2 P265GH steel plate cutting parts and machined parts. ... , 20MnMoNi4-5,15NiCuMoNb5-6-4,13CrMo4-5,13CrMoSi5-5,P265GH,12CrMo9-10,X12CrMo5,13CrMoV9-10,12CrMoV12-10,X10CrMoVNb9-1. P265GH steel grade is one of grade in En10028-2, which is non alloy and alloy steels with specified elevated temperature properties.

Din 17175 13CrMo44 Seamless Pipes and Tubes,13CrMo44 …

DIN 17175 13CrMo44 Pipes Manufacturer. Marc Steel is a well-known exporter of DIN 17175 13CrMo44 Pipes, which has a number of outstanding features to provide like completely tested, quality approved, cost effective, and more. 13CrMo44 Welded Steel Tubes can be used in gas and oil transportation, and also in mechanical and manufacture, steel structure, ship building, bridging, automobile chassis.

EN 10028-2 P355GH boiler and pressure vessel steel plate ...

EN 10028-2 P355GH boiler and pressure vessel steel plate 2013年9月11日 by admin

DIN EN 10028-2 13CrMo4-5 Pressure Vessel Steel Plate

DIN EN 10028-2 13CrMo4-5 Pressure Vessel Steel Plate TJC Steel can supply DIN EN 10028-2 13CrMo4-5 Pressure Vessel Steel Plate, mainly used in structural parts of pressure vessel equipment. .

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.