Tel: +86-371-86151827

aluminum zinc alloy sheet

Steel grade:aluminum zinc alloy sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aluminum zinc alloy sheet Introduction

Aluminum- Zinc alloy Coated Steel Sheet (ALCOAT)

Aluminum-Zinc Alloy Coated Steel Sheet - Galvalume. The alloy coating comprises about 55% aluminum, 43.4% zinc and 1.6% silicon. This coating combines the superior corrosion resistance of aluminum with the cut edge protection of zinc.

ALUMINUM-ZINC ALLOY-COATED STEEL SHEET - Hoa Sen …

Hoa Sen Aluminum-zinc alloy-coated steel sheet is produced on the modern NOF technology line and meets the requirements of ASTM A792/A792M (USA), AS 1397 (Australia), JIS G 3321 (Japan), MS 1196 (Malaysia) and EN 10346 (Europe) standards. The surface of the product is bright and beautiful with silver color, outstanding corrosion resistance, effective heat resistance, flexibility in design and ...

aluminum zinc alloy coated steel sheet- Aluminum/Al foil ...

aluminum zinc alloy coated steel sheet . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.

Atlas Metal Sales

Zinc Sheet; Description. Zinc, its alloys and its chemical compounds represent the fourth most industrially utilized metal (behind iron, aluminum and copper). Zinc is used in five principal areas of application: In coatings and anodes for corrosion protection of irons and steels; in zinc casting alloys; as an alloying element in copper ...

Metal Sheet - Pre-Painted Aluminum - Zinc Alloy Coated ...

Wholesale Trader of Metal Sheet - Pre-Painted Aluminum - Zinc Alloy Coated Steel (PPGL) Sheet, Metal Roofing Sheets, Bare Galvalume Sheets offered …

Zinc Alloys : Allied Metal Company

Zinc alloys with higher amounts of aluminum than the conventional alloys use the prefix ZA followed by their approximate aluminum content. These include ZA-8, ZA-12 and ZA-27. ZA alloys offer higher strength, and useful bearing properties.[PDF]

MATERIAL SAFETY DATA SHEET - ALUMINUM ALLOYS

MATERIAL SAFETY DATA SHEET - ALUMINUM ALLOYS SECTION 3: HAZARDS IDENTIFICATION (See Note in Section 1) Carcinogenicity: IARC, NTP, and OSHA do not list Aluminum alloy as a carcinogen. Beryllium contained in some Aluminum alloys is classified as carcinogenic by

Zinc Aluminum Alloy | AMERICAN ELEMENTS

Zinc Aluminum is one of numerous metal alloys sold by American Elements under the trade name AE Alloys™. Generally immediately available in most volumes, AE Alloys™ are available as bar, ingot, ribbon, wire, shot, sheet, and foil.[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Electrolytic zinc-nickel alloy-coated steel sheet and strip Zn-Si-Ni alloy coated steel sheet and strip Nickel Coated Steel Sheet and strip Topcoat Base metal Zn Hot-dip zinc-aluminum-magnesium-silicon alloy coated steel sheet and strip Hot-dip 55% aluminum-zinc alloy-coated steel sheet and strip Sn-Zn layer Special film Intro-duction page

Aluminum Ingots, Aluminum Plate, Aluminum Coil, Copper ...

Handan Wangguan Metal Technology Co., Ltd. For the last 20 years, Handan Wangguan Metal Technology Co., Ltd. has been working on alumnium and aluminium sheet, aluminium profile cathode copper production, sales of magnesium ingot, lead ingots, zinc ingots and metal scrap, which cultivated us strong technology capability and market foundation mainly in continents of Europe, America, Africa …

Zinc Aluminum Alloy | AMERICAN ELEMENTS

Zinc Aluminum is one of numerous metal alloys sold by American Elements under the trade name AE Alloys™. Generally immediately available in most volumes, AE Alloys™ are available as bar, ingot, ribbon, wire, shot, sheet, and foil.

Metal Sheet - Pre-Painted Aluminum - Zinc Alloy Coated ...

Wholesale Trader of Metal Sheet - Pre-Painted Aluminum - Zinc Alloy Coated Steel (PPGL) Sheet, Metal Roofing Sheets, Bare Galvalume Sheets offered …

Zinc Aluminum-Magnesium Coated Steel Sheets & …

This zinc aluminum magnesium steel coil in comparison with hot-dip galvanized steel and hot-dip galvanized 5% aluminum alloy steel, can achieve the same corrosion resistance but use less plating layers. In addition, because of its excellent resistance to red rust, it can be used to be instead of stainless steel or aluminum plate. 4.

Buy 5% Aluminum zinc Alloy Coated Steel Sheet

Buy 5% Aluminum zinc Alloy Coated Steel Sheet: Copper and Alloy - Resistance Seam Welding Wheel … Copper and Alloy We are a leading Manufacturer of resistance seam welding wheel, gunmetal products, aluminum bronze, cadmium copper c16200 (cucd1), naval brass c46400 and ...

Aluminum zinc alloy coated Steel Sheet

Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated …· PDF Designation: A 792/A 792M – 09 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process1 This standard is issued under the fixed designationA792/A792M; the number immediately following the designation indicates the ...

ALUMINUM-ZINC ALLOY-COATED STEEL SHEET - Hoa Sen …

Hoa Sen Aluminum-zinc alloy-coated steel sheet is produced on the modern NOF technology line and meets the requirements of ASTM A792/A792M (USA), AS 1397 (Australia), JIS G 3321 (Japan), MS 1196 (Malaysia) and EN 10346 (Europe) standards. The surface of the product is bright and beautiful with silver color, outstanding corrosion resistance, effective heat resistance, flexibility in design and ...

The Difference Between Aluminum, Magnesium and Zinc Alloys ...

Aluminum vs. Zinc Alloys. Just like with magnesium, one of the main differences between aluminum and zinc alloys is that zinc has a lower melting temperature and requires lower pressures for casting. Zinc is considered to be the most castable of all of the commonly used alloys.

Zinc - Online Metal Store

Zinc metal sheet is a non-sparking, corrosion resistant material that is widely used in outdoor applications. Zinc also offers high formability and is known to be an environmentally friendly metal due to its infinite recyclability and low-impact production method.[PDF]

MATERIAL SAFETY DATA SHEET - ALUMINUM ALLOYS

MATERIAL SAFETY DATA SHEET - ALUMINUM ALLOYS SECTION 3: HAZARDS IDENTIFICATION (See Note in Section 1) Carcinogenicity: IARC, NTP, and OSHA do not list Aluminum alloy as a carcinogen. Beryllium contained in some Aluminum alloys is classified as carcinogenic by[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Electrolytic zinc-nickel alloy-coated steel sheet and strip Zn-Si-Ni alloy coated steel sheet and strip Nickel Coated Steel Sheet and strip Topcoat Base metal Zn Hot-dip zinc-aluminum-magnesium-silicon alloy coated steel sheet and strip Hot-dip 55% aluminum-zinc alloy-coated steel sheet and strip Sn-Zn layer Special film Intro-duction page

Zinc Sheet - NEY Metals & Alloys

Product Name Ney Product Code Form Product Description; Zinc Sheet: 800.060.060" x 39.37" x 96" 99.99% Zinc. Zinc Sheets designed for food grade service, such as …[PDF]

MATERIAL SAFETY DATA SHEET - Purity Zinc Metals

MATERIAL SAFETY DATA SHEET #2, #5 & #7 ZINC ALLOY Date of Issue May 16, 2000 Special Procedures: Use caution when immersing solid zinc into a molten bath.

Zinc Aluminium Sheet, Zinc Aluminium Sheet Suppliers …

Alibaba offers 36,976 zinc aluminium sheet products. About 1% of these are aluminum sheets, 1% are steel wire mesh, and 1% are aluminum profiles. A wide variety of zinc aluminium sheet options are available to you, such as 2000 series, 6000 series, and 1000 series.[PDF]

55% Aluminum-Zinc Alloy Coated Steel - Cascadia Metals

successfully welding 55% Aluminum-Zinc Alloy Coated Steel sheet are very similar to those for galvanized sheet. 7.1 Spot Welding. The optimum tip geometry which provides the longest electrode tip life when spot welding 55% Aluminum-Zinc Alloy Coated Steel sheet is the truncated cone with either a 90° or 120° included angle.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.