Tel: +86-371-86151827

steel 690 steel 718 plate rod tube

Steel grade:steel 690 steel 718 plate rod tube

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel 690 steel 718 plate rod tube Introduction

Inconel® Alloy 690 - American Special Metals, Corp.

In various types of high-temperature water, alloy 690 displays low corrosion rates and excellent resistance to stress-corrosion cracking. Thus, alloy 690 is widely used for steam generator tubes, baffles, tubesheets, and hardware in nuclear power generation. Available Product Forms: Plate, round bar, forging stock, pipe and tube

Inconel - Speciality Metals

specialitymetals.ae› MaterialsJul 29, 2017· Leading Provider of Plates, Sheets, Rods, Tubes, Pipes, Fitting, Flanges in UAE, KSA, Bahrain, Kuwait, Oman, Qatar. ... Alloy 602 CA - Inconel Alloy 22 - Inconel Alloy 600 - Inconel Alloy 601 - Inconel Alloy 617 - Inconel Alloy 625 - Inconel Alloy 690 - Inconel Alloy 718 - Inconel Alloy 725 - Inconel Alloy C-276 - Inconel Alloy HX - Inconel ...User rating: 5/5

Inconel® 690 Plate - Continental Steel & Tube Co.

Browse Inconel® 690 Plate in the Continental Steel & Tube Co. catalog including Item #,Thickness,Plate Weight per Unit Area,Density

Inconel Plate suppliers in Malaysia ... - Steel Tubes India

Inconel Plate suppliers in Malaysia, Inconel Sheet distributors in Kuala Lumpur, Inconel Shim Sheet traders in Klang, inconel round bar suppliers ... Steel Tubes India was established in 1994. Now a leading distributor of Inconel sheet, Inconel plate and Inconel round bar in Malaysia. ... Inconel 718 Black Rods suppliers in Malaysia Alloy 718 ...User rating: 5/5

inconel | eBay

ebay› Search› inconelINCONEL 600 SEAMLESS TUBE 1/4 OD X .049 WALL x 48.00 WITH CERTIFIED TEST REPORT See more like this 4 Inconel 718 1-1/2 inch studs 8 TPI x 11.5 long with nuts New (Other)

Inconel Pipe, Tube, Flange, Fitting, Plate, Sheet, Coil ...

Inconel Pipes & Tubes Can Be Supplied In Different Grades & Sizes As Required By Our Clients. We Manufacture Inconel 600 Round Pipes & Tubes, Inconel 601 Pipes & Tubes, Alloy 690 Tube, Inconel 625 Welded & Seamless Pipes & Tubes, Inconel 718 Pipes & Tubes, Incoloy 800/800h/800ht & 825 Pipes & Tubes.

Inconel Alloy 690 Rod, Inconel Alloy 690 Rod Suppliers and ...

Inconel 718 Pipe Seamless we are dealing with steel products for many years and our main products are heat resistant steel as Inconel 600, 601, 625, 690, 718 etc. ; and we are the first agent of TISCO, Baosteel, Chongqing special steel, LISCO, and some other special steel mill etc.

718 Stainless Steel Sheet, Plate, and Round Bar

718 Stainless Steel Plate, 718 Stainless Steel Sheet, 718 Steel Round Bar. Common Trade Names 718 Stainless, 718 Stainless Steel, Inconel 718. Features. Corrosion Resistance: 718 stainless stands up excellently in a range of atmospheric environments even when exposed to corrosive elements, specifically to sea water.

718 - Rolled Alloys, Inc.

Inconel 718 is a high strength nickel base superalloy used for cryogenic temperatures up to long term service at 1200°F. The alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. Anneal 1700 -1850°F, air cool or faster.

super steel 690 plate sheet - hopkinsplasticsurgery

Hot selling ams 5962 steel 718 preis; Ss400 steel pipe specifications manufacture; Professional Factory Made Steel Plate Cutting; 42crmo hot forged steel round bars for export; Steel Pipe A36 Q235 SS400; sae 1045 steel round bars; Corten A steel plate Corten B steel plate; Prime Weld Square 15 *15 Steel Pipe Prices; price of weld bar steel 617 rod

Factory Steel - Steel Tubing - Square, Rectangular - Steel ...

Metal Service Center Specializing In Aircraft Quality 4130 Alloy. Stocking Metals Supplier with Steel, Aluminum, Stainless Steel & Brass In: Angles, Bars, Channels, I ...

Nickel Inconel 718 | Tech Steel & Materials

Inconel 718 is a precipitation-hardenable nickel-chromium alloy containing large amount of iron, niobium and molybdenum. It also contains small amounts of titanium and aluminum. It is known for its corrosion resistance, high strength and outstanding weldability.Property: Value

Inconel® Alloys - American Special Metals, Corp.

Inconel® Alloys American Special Metals, Corp. distribution products includes super alloys in Pipe, Tube, Fitting, Flange, Sheet, Strip, Plate, Round Bar, Flat Bar, Fastener, Forging Stock, Hexagon and Wire. American Special Metals' core business is the Distribution of nickel alloys and cobalt alloys.

Factory Steel - Steel Tubing - Square, Rectangular - Steel ...

Metal Service Center Specializing In Aircraft Quality 4130 Alloy. Stocking Metals Supplier with Steel, Aluminum, Stainless Steel & Brass In: Angles, Bars, Channels, I ...

Inconel 718 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. Inconel 718 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Inconel - Speciality Metals

specialitymetals.ae› MaterialsLeading Provider of Plates, Sheets, Rods, Tubes, Pipes, Fitting, Flanges in UAE, KSA, Bahrain, Kuwait, Oman, Qatar. ... Alloy 602 CA - Inconel Alloy 22 - Inconel Alloy 600 - Inconel Alloy 601 - Inconel Alloy 617 - Inconel Alloy 625 - Inconel Alloy 690 - Inconel Alloy 718 - Inconel Alloy 725 - Inconel Alloy C-276 - Inconel Alloy HX - Inconel ...

Inconel 718 Rod Bar Tube Pipe - Tech Steel & Materials

Inconel 718 comes in the form of the Inconel 718 Tube Pipe, Inconel 718 Rod Bar, and Inconel 718 AMS 5662. The Inconel 718 Tube Pipe can be found in the form of a Rod, Bar, Wire, Sheet, Plate, Strip, Castings, Pipe, Tube or Forgings. Besides AMS 5662 AMS 5663, AM 355 AMS 5743 5744, and Inconel Incoloy 909 901 903, we can help you with all your ...

Nickel Alloy 718, Inconel® 718 - Continental Steel & Tube ...

Continental Steel is a distributor of alloy 718 in pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon, wire, and extruded section. In addition, the mills that Continental Steel works with to supply alloy 718 meet or exceed industry standards from such leading organizations as, ASTM, SAE, ASME, AECMA PrEN, DIN, and ISO.

inconel 600 steel bar rod - w3s.in

Polished Inconel 600 Rod, Polished Inconel 600 Rod ...A wide variety of polished inconel 600 rod options are available to you, such as round, nickel bar, and nickel pipe. You can also choose from astm, aisi, and jis. As well as from valve steels, cold heading steel. And whether polished inconel 600 rod is free samples. There are 70 polished inconel 600 rod suppliers, mainly located in Asia.

Inconel 601 Tube Pipe - Tech Steel & Materials

Inconel 601 Tube Pipe can be hardened and strengthened only by cold work. Inconel 601 can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

What is inconel? - Quora

FASTWELL offers a wide range of Inconel Tubes, which are readily hot or cold roll rolled into a variety of parts for applications in the industrial, architectural, and transportation fields. We also offer these products in different grades in very standard rate. fastwell is well-known Inconel tube suppliers.

Inconel 718 Round Bar - Online Metal Store

Inconel 718 Round Bar. Nickel Alloy 718 Round Rods have both high strength properties and good corrosion resistance and weldability. It is commonly used for valves, fasteners, tubing materials and mandrels. Alloy 718 has excellent cryogenic and heat ranges. It is heat treatable, has moderately good corrosion resistance, weldability and formability.

Inconel 718 Sheet / Plate - Online Metal Store

Inconel 718 Sheet / Plate. 718 Nickel Alloy Sheet is a high-strength, corrosion resistant, and easily age hardened, alloy that can be easily fabricated. Commonly used for rockets, rings, aircrafts siding and gas turbine engines, 718 Alloy Nickel offers reliable versatility and strength.

Inconel 690 Forgings | All Metals & Forge Group

Alloy 690 is a high-chromium-nickel alloy with excellent resistance to many corrosive aqueous media and high-temperature atmospheres. The alloy may be forged between 2250/1900ºF (1230/1040ºC.) Light forging may be continued down to 1600ºF (870ºC.). To Send a …

Inconel® from Continental Steel & Tube Co. - ThomasNet

thomasnet› Company Profile› Supplier DiscoveryFind Inconel® from Continental Steel & Tube Co. Inconel 718 is a precipitation-harden able, nickel-chromium alloy containing also-significant amounts of iron, niobium and molybdenum, along with lesser amounts of aluminum and titanium.

Inconel 718, Alloy 718, Inconel Alloy 718, UNS N07718, …

Inconel 718 Sheet/ 718 Nickel Sheet, Inconel 718 Bar/ 718 Nickel Bar,and Inconel 718 Plate/ 718 Nickel Plate. Inconel Alloy 718 is a precipitation-hardenable nickel based alloy. It has good ductility in the annealed condition and exceptionally high yield, tensile and creep rupture properties up to 1300 Degrees F. Alloy 718 has excellent ...

Metal Alloys Information - tensile strength, inconel ...

Metal Tidbits – Information about Steel Alloys. Our metal alloy information center is an Industry Resources section that contains many brief articles on metal alloys and other general information. As this information develops, it will be categorized for greater ease of use and reference.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.