Tel: +86-371-86151827

a36 steel plate chemistry

Steel grade:a36 steel plate chemistry

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a36 steel plate chemistry Introduction

A36 - BEBON steel - A36 steel plate

ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material. It is widely used in the construction of buildings, bridges ...

ASTM A36 Steel Composition, Properties, Hardness ...

ASTM A36 material has good weldability, it is usually hot rolled into rectangle steel, square steel, round steel, steel plate, and is also commonly made into all kinds of steel sections such as H beam, I beam, U channel, steel angle, steel tube, etc. ASTM A36 Steel Chemical Composition

ASTM A36 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. ASTM A36 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Grade Guide: A36 Steel | Metal Supermarkets - Steel ...

Chemical Composition

ASTM A36 Steel Plate - Completely Specifications You ...

What Is ASTM A36

ASTM A36 STEEL PLATES - hightensileplates

ASTM A36 steel plate is one of the most widely used carbon structural steels used in the industry. It can be riveted, bolted or welded in the construction of bridges and buildings, and for general structural purposes. ASTM A36 is known to be an equivalent to EN S275 steel plate. A36 STEEL PLATE SIZES. 3/16” – 28” TYPICAL CHEMICAL PROPERTIES[PDF]

ASTM A36 Mild/Low Carbon Steel - hrsteelservice

CARBON STRUCTURAL STEEL PLATE all measurements in inches THICKNESS WIDTH LENGTH A36 3/16" – 8" 48" – 120" 96" – 480" Machining The machinability rate of ASTM A36 is estimated to be 72%, and the average surface cutting feed of ASTM A36 is 120 ft/min. Machining of ASTM A36 steel is not as easy as that of AISI 1018 steel. Welding

ASTM A36 Mild/Low Carbon Steel - AZoM

Topics Covered

A36 Steel Sheets & Plates - aspirinox

ASTM A36 Sheets, Carbon Steel A36 Cold Rolled Plates, ASME SA A36 Shim Sheets, A36 Carbon Steel Slatting Coils, A36 Carbon Steel Hot Rolled Sheets Stockists & Exporter Aspirinox Alloys Inc is a recognized manufacturer supplier and exporter of A36 Steel Sheets & Plates .Specialize: Shim Sheet, Perforated Sheet, B. Q. Profile.

A36 vs. 1018 Steel Comparison | Capital Steel & Wire

Capital Steel & Wire for example makes 1018 cold drawn bar in square, hexagon, round, and flat bar shapes and can cut it in any specified length. A36 Steel. ASTM A36 steel is one of the most widely manufactured grades of steel bar, as it has many different applications across many industries.

A36 Mild Steel (available in Angle, EXPANDED, Perforated ...

A36 - Hot Roll Angle; A36 - Hot Roll Round Bar; A36 - Hot Roll Square Bar; A36 - Steel Perforated Sheet; A500/A513 - Hot Roll Tube - Rectangle; A500/A513 - Hot Roll Tube - Square; Hot Roll Flat Bar; Hot Roll Sheet / Plate; Mild Steel Expanded Flattened A36; Mild Steel Expanded Standard A36

A36 vs. 1018 Steel Comparison | Capital Steel & Wire

Capital Steel & Wire for example makes 1018 cold drawn bar in square, hexagon, round, and flat bar shapes and can cut it in any specified length. A36 Steel. ASTM A36 steel is one of the most widely manufactured grades of steel bar, as it has many different applications across many industries.[PDF]

Datasheet for Steel Grades Carbon Steel ASTM A36

Steel GradeASTM A36 Chemical information,Mechanical properties Physical properties, Mechanical properties, Heat treatment, and Micro structure ... is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application. Datasheet for Steel Grades Carbon Steel ASTM A36

A36 Steel Sheets & Plates - aspirinox

ASTM A36 Sheets, Carbon Steel A36 Cold Rolled Plates, ASME SA A36 Shim Sheets, A36 Carbon Steel Slatting Coils, A36 Carbon Steel Hot Rolled Sheets Stockists & Exporter Aspirinox Alloys Inc is a recognized manufacturer supplier and exporter of A36 Steel Sheets & Plates .

A36 SA36 Common carbon steel plate--YUSHENG STEEL

YUSHENG STEEL specialized in wide heavy steel plates,as for carbon structure steel plate ASTM A36,now we can roll the maximum thickness till 560 mm and gurantee the steel properity.The heaviest unit weight can reach to 46 Metric Tons using the 62 tons steel ingots.This is the unique technical in China steel mills. Chemical composition of Heat ...

NK grade A36 steel chemical composition

NK grade A36 shipbuilding steel plate chemical composition. Steel Plates Dealers Suppliers Exporters India Gaurav Ispat is a Professional IS 2062 E350 BR Plate manufacturer in india, specialize in manufacturing Hot rolled mild steel plates, S355 steel plates, High Tensile steel plates, ASTM A516 grade 70 steel plates, ASTM A36 steel plate ...

ASTM A36 Carbon Structural Steel Plate Specification

ASTM A36 steel plate is the most widely used hot-rolled steel product. As a kind of carbon structural steel product, its relative products are round rod steel, angle bar, and steel sections such as I-Beams, H-beams, angles, and channels.

Steel Plates, Metal Plates, Chemistry - tmtco

tmtco / Products / Steel Plating / Metal Plates Chemistry. Metal Plates Chemistry. TMT sells a large variety of metal plating from low carbon to steel alloy. Please call …[PDF]

Steel grades according to American standards - A36, …

Chemical composition A36 - 04b A36 0.26 0.05 0.04 ≤0.40 A572 - 04 ... A36 ≥250 [36] 400-550 [58-80] 20 21 A572 - 04 Grade 42 ≥290 [42] ≥415 [60] 20 24 Grade 50 ≥345 [50] ≥450 [65] 18 21 ... Steel grades according to American standards - A36, A572, A588, A709, A913, A992.

A36 Mild Steel (available in Angle, EXPANDED, Perforated ...

A36 - Hot Roll Angle; A36 - Hot Roll Round Bar; A36 - Hot Roll Square Bar; A36 - Steel Perforated Sheet; A500/A513 - Hot Roll Tube - Rectangle; A500/A513 - Hot Roll Tube - Square; Hot Roll Flat Bar; Hot Roll Sheet / Plate; Mild Steel Expanded Flattened A36; Mild Steel Expanded Standard A36[PDF]

Chemical Composition of Structural Steels

increase in strength is achieved through heat treatment. A514 is available only in plate form, up to 6 inches thick. Following is a list of some important chemical elements used in structural steels: Carbon (C) Next to iron, carbon is by far the most important chemical element in steel.

ASTM A36 Plate - Low Carbon Steel Plate-Triton Alloys Inc

As well as being available from stock all A36 Steel Plate can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems.Our A36 Steel Plate are sourced from the highest quality steel manufacturers in the world and, like all our ...

A36 Modified - American Welding Society

Dec 06, 2005· I'm looking at the 2001 ASTM for A36. The term modified doesn't appear in any description of the properties of the material. My guess would be that it refers to invoking one of the "Supplemental" Requirements. One is a Charpy requirement and the other is a limitation on rimmed or capped steel.

AH36 Shipbuilding steel plate - BEBON INTERNATIONAL

AH36 Shipbuilding steel plate. ASTM A131 AH36 steel plate, AH36 steel is a kind of steel for shipbuilding and platform. Shipbuilding steel plate AH36 is the high tensile strength steel. As a professional AH36 shipbuilding steel plate exporter, Bebon international can supply steel plate AH36.

MetalsDepot® - Buy A36 Steel Plate Online!

Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications.. Specifications: ASTM A36, AISI A-36 ; Applications: base plates, gussets, liners, road plates, trench covers, etc. Workability: Easy to Weld, Cut, Form and Machine

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.