Tel: +86-371-86151827

squeezed 2024 alclad sheet

Steel grade:squeezed 2024 alclad sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

squeezed 2024 alclad sheet Introduction

2024T3 ALCLAD ALUMINUM SHEET from Aircraft Spruce

2024T3 ALCLAD ALUMINUM SHEET Aluminum alloy sheet is sold in the thicknesses and sheet sizes shown in the table. Minimum sheet size available is 2' X 4'. Order by part number. No guarantee against scratches is possible due to the handling r

Aluminum Sheet - Series 2024-T3 Alclad

Browse Aluminum Sheet - Series 2024-T3 Alclad in the Continental Steel & Tube Co. catalog including Item #,Thickness,Size,Sheet Weight per Unit Area,Weight per Sheet

2024-O ALCLAD ALUMINUM SHEET from Aircraft Spruce

2024-O ALCLAD ALUMINUM SHEET 2024-O ALCLAD Aluminum. Enter the quantity desired of each item in the Buy column. Tkns. (in.) Wt/Sq.Ft.

2024-T3 Alclad Aluminum Sheet - onlinemetalsupply

2024 Alclad Aluminum Sheet has a layer of pure aluminum added to the surface for increased corrosion resistance, this alloy is general used when high strength yet lightweight is needed. It does not form or weld as well as some of the common alloys of aluminum, yet it provides much higher tensile strength.

Alclad Aluminum 2024-T4, T351 - MatWeb

Intrinsic corrosion resistance of 2024 is low for an aluminum alloy, so the clad version is used where needed. Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN. Composition Notes: Composition for AA 2024 (not Alclad 2024).

Alcoa Alclad Aluminum 2024-T3 Sheet -- QQ-A-250/5

When you need reliable coverage for many aircraft surfaces, Alcoa Alclad Aluminum 2024-T3 Sheet is a great choice. This special alloy was developed by Alcoa using aluminum, which delivers a lightweight yet high-strength sheeting that is great for aircraft fuselage structures due to its excellent fatigue resistance.

Aluminum Sheet 2024T3 Alclad - myaluminumsupply

It has excellent fatigue resistance. Welding is generally not recommended. Typical uses for 2024-T3 alclad aluminum sheet are aircraft skins, cowls, aircraft structures, and also for RV repair and restoration like Airstreams because of it's shiny finish (2024T3 alclad) We can provide certified mill documentation for this product when required.

2024 aluminium alloy - Wikipedia

Oct 14, 2006· 2024 is commonly extruded, and also available in alclad sheet and plate forms. It is not commonly forged (the related 2014 aluminium alloy is, though). Basic properties. Aluminium alloy 2024 has a density of 5.68 g/cm³ (0.1 lb/in³), electrical conductivity of 30% IACS ...Author: Contributors to Wikimedia Projects

Aluminum Sheet 2024T3 Alclad - myaluminumsupply

It has excellent fatigue resistance. Welding is generally not recommended. Typical uses for 2024-T3 alclad aluminum sheet are aircraft skins, cowls, aircraft structures, and also for RV repair and restoration like Airstreams because of it's shiny finish (2024T3 alclad) We can provide certified mill documentation for this product when required.

2024-T3 Aluminum Sheet On Wicks Aircraft Supply

2024T3 sheet has same characteristics as tubing, however, the sheet is alclad for corrosion resistance. Alclad is a metallurgically bonded aluminum or aluminum alloy coating that is anodic to the core, thus electrolytically protecting the core against corrosion.

2024-O Clad Sheet / Plate - Online Metal Store

2024-O Clad Sheet / Plate. Aluminum Sheet 2024 O Clad, often referred to as aerospace grade aluminum, is an excellent choice when high strength capabilities, fatigue resistance and high corrosion resistance are needed. 2024 O-temper sheet is found in aircraft siding and skins because of its high strength-to-weight ratio and clad aluminum or Alclad surface, further improving corrosion resistance.

What is Alclad? - Definition from Corrosionpedia

Sheets of 2024-T3 Alclad are a good example of this. The first aircraft to be constructed from Alclad was the all-metal Navy airship ZMC-2, constructed in 1927 at Naval Air Station Grosse Ile. In applications involving aircraft construction, Alclad has proven to have increased resistance to corrosion at the expense of increased weight when ...

Alclad Aluminum 2024-T4, T351 - MatWeb

Intrinsic corrosion resistance of 2024 is low for an aluminum alloy, so the clad version is used where needed. Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN. Composition Notes: Composition for AA 2024 (not Alclad 2024).

2024T3 ALUMINUM SHEET - Metal Supermarkets

2024T3 ALUMINUM SHEET. One of the most widely used aluminum alloys, it finds applications in a variety of structural areas such as aircraft structures, fasteners, hardware, wheels, …

2024T3 Alclad Aluminum Sheet and Coil - airpartsinc

QQ-A-250/5 2024T3 alclad aluminum sheet, 2024-T3 This is the most common of the the high-strength alloys. Aircraft quality 2024 T3 aluminum sheet is thought of as the aircraft alloy because of it's strength. 2024T3 has excellent fatigue resistance. Welding is generally not recommended. Typical uses for 2024T3 alclad aluminum sheet are aircraft skins, cowls, aircraft structures, and also for RV ...

Aircraft Aluminum Sheet, Aircraft Aluminum Sheeting ...

Aluminum Sheet. Future Metals is the premier source of high quality aircraft aluminum sheeting.. World Renowned Aircraft Aluminum sheet supplier. We offer a great selection of aircraft aluminum sheet in a variety of specifications. Look through our extensive assortment of aircraft aluminum sheet here or get in touch with a Future Metals professional for a personalized quote on your next ...

2024-T3 Bare Aluminum Sheet - onlinemetalsupply

2024-T3 Alclad Aluminum Sheet. $15.47. Quick view. Aluminum Composite Sheet (White/White) $35.70. Quick view. Aluminum Expanded Sheet (Flattened) $52.42. Quick view. 2024 Aluminum Hex Bar.

2024T3 ALCLAD ALUMINUM SHEET from Aircraft Spruce …

2024T3 ALCLAD ALUMINUM SHEET Aluminum alloy sheet is sold in the thicknesses and sheet sizes shown in the table. Minimum sheet size available is 2' X 4'. Order by part number. No guarantee against scratches is possible due to the handling r[PDF]

ALLOY 2024 SHEET AND PLATE - howardprecision

An improved sheet alloy for fuselage applications was introduced in 1991. Alclad C188 offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of 2024. Alloy 2024 is available in bare and alclad sheet and plate product forms in the annealed state and several tempers of T3, T4, and T8 types ...

Alcoa Alclad Aluminum 2024-T3 Sheet -- QQ-A-250/5

When you need reliable coverage for many aircraft surfaces, Alcoa Alclad Aluminum 2024-T3 Sheet is a great choice. This special alloy was developed by Alcoa using aluminum, which delivers a lightweight yet high-strength sheeting that is great for aircraft fuselage structures due to its excellent fatigue resistance.

2024 Aluminium Alloy/ 2024 Aluminum Alloy - Aircraft …

Aluminium 2024 (2024A) is one of the most popular high strength Aluminium alloys when it is the heat treated condition. Due to 2024 (2024A) high strength and excellent fatigue resistance it is commonly used on structures and components in the aircraft and transportation industries.

Aluminum Sheet 2024 O Clad 0.025" - Online Metal Store

Aluminum 2024 O-temper sheet is found in aircraft siding and skins because of its high strength-to-weight ratio and clad aluminum or Alclad surface, further improving corrosion resistance. HEAT TREATMENT IS NECESSARY TO PROVIDE STRENGTH, AS O TEMPER IS EXTREMELY SOFT

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.