Tel: +86-371-86151827

tool steel plate 1 2379 steel bar f

Steel grade:tool steel plate 1 2379 steel bar f

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

tool steel plate 1 2379 steel bar f Introduction

D2 Tool Steel | 1.2379 | SKD11 Tool Steel - Otai Special Steel

Cold Works D2 tool steel is a high carbon, high chromium tool steel (12% chrome) with extremely high wear resisting properties, heat treatable to 60-62 Rc. D2 steel is very wear resistant but not as tough as lower alloyed steels. D2 tool steel hardens in air with a low order of movement and offers a measure of corrosion resistance when polished.

1.2379 Tool Steel - Special steel china supplier-OTAI ...

1.2379 tool steel china supplier and wholesalers , Otai Special Steel supply the 1.2379 in Round bar, Plate, Flat bar, Square bar, and others customize sharp, steel sections and form. Contact Email: [email protected] […]

1.2379 / X153CrMoV12 Steel - Cold Work Tool Steel | Steel Bar

1.2379 / X153CrMoV12. DIN 1.2379 / X153CrMoV12 Steel is a high carbon and high chromium type cold work tool steel. The Molybdenum and Vanadium compositon of din 1.2379 is more than 1.2601 steel. X153CrMoV12 steel has higher strength and toughness,which makes the comprehensive performance of 1.2379 steel better.

Buy 1 2379 Alloy Steel Round Bars Similar Grade D2 - w3s.in

Chemical composition of DIN 1.2379 Cold Working Tool Steel Round Bars / DIN 1.2379 Tool Steel Flat Bar: .. JIS SKD11 Cold Working Tool Steel SKD11 Round Bar SKD11 Rods . Cold-work tool steels which include D2, D3, D4, D5, and D7 steels are .. Learn more

Germany DIN 1.2379 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 1.2379 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

D2 Tool Steel | 1.2379 | X153CrMo12 | Cr12MoV | SKD11

SAE D2 tool steel is a high carbon (1.4-1.6% C), high chromium Cold tool steel (11-13% chrome), and with Very high wear resisting properties, heat treatment can be reached to 60-62 HRc. D2 steel have very wear resistant property but not as tough as lower alloy steel. Cold work D2 tool steel hardens in air with a low order of movement and offers ...

1.2379/D2/SKD11 tool steel, 1.2379/D2/SKD11 round bars, 1 ...

Buy 1.2379/D2/SKD11 tool steel, 1.2379/D2/SKD11 round bars, 1.2379/D2/SKD11 flat bars, 1.2379/D2/SKD11 steel plates from China- quality Cold Work Tool Steel …

China AISI D2 / Cr12Mo1V1/ 1.2379/ SKD11 Tool Steel Bar ...

Steel Bar, Die Steel, D2 Steel manufacturer / supplier in China, offering AISI D2 / Cr12Mo1V1/ 1.2379/ SKD11 Tool Steel Bar, Cheap Price HMD5/CH-1/7crsimnmov Alloy Steel Plate&Sheet for Machine Parts, Cheap Price HMD5/CH-1/7crsimnmov Die Steel Plate&Sheet for Machine Parts and so on.

1.2379 Tool Steel - Delivered Nationwide by West Yorkshire ...

1.2379 steel suppliers and stockholders delivering to the whole of the UK. West Yorkshire Steel are suppliers of 1.2379 high carbon, high chromium tool steel in round bar, plate, sheet and block which can be bandsaw cut to your requirements.

A2 Tool Steel | 1.2363 | X100CrMoV5 | SKD12 | BA2 - Otai ...

A2 Tool Steel is a versatile, air hardening chromium alloy tool steel that replaces O1 tool steel when safer hardening, less distortion and increased wear resistance are required. AISI type A2 steel is intermediate in wear resistance between O1 oil-hardening tool steel and D2 high-carbon, high-chromium tool steel.

Din 1.2379 Tool Steel Plate, Din 1.2379 Tool Steel Plate ...

Alibaba offers 398 din 1.2379 tool steel plate products. About 27% of these are steel sheets, 1% are stainless steel sheets. A wide variety of din 1.2379 tool steel plate options are available to you, such as astm, aisi, and jis.

MetalsDepot® - O1 Flat Ground Tool Steel

O1 Flat Ground, is an oil-hardening, non-deforming tool steel which can be hardened at relatively low temperatures. Tools and dies made from O1 Flat Ground will have good wearing and abrasive qualities since the tungsten and higher chromium content gives improved wear resistance.

Plate Din 1.2379, Plate Din 1.2379 Suppliers and ...

Tags: High Wear Resistant Cold Work Tool Steel Grade 1.2379 | Cold Work Tool Steel Grade 1.2379 For Knives And Precision Measuring Tools | Hot Rolled High Wear Resistant Cold Work Tool Steel Grade 1.2379 For Knives And Precision Measuring Tools ... D2 Steel plate flat bar 1.2379/SKD11/Cr12Mo1V1 cold work tool steel . US $3200.0-3200.0 / Metric ...

A2 Tool Steel | 1.2363 | X100CrMoV5 | SKD12 | BA2 - Otai ...

A2 Tool Steel is a versatile, air hardening chromium alloy tool steel that replaces O1 tool steel when safer hardening, less distortion and increased wear resistance are required. AISI type A2 steel is intermediate in wear resistance between O1 oil-hardening tool steel and D2 high-carbon, high-chromium tool steel.

1.2379 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 1.2379 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

1.2080 / X210Cr12 Steel - Cold Work Tool Steel | Steel Bar

1.2080 / X210Cr12. DIN 1.2080 / X210Cr12 Steel is a high Carbon and high Chromium cold work tool steel. The 1.2080 steel has good hardenability and wear resistance. But due to the carbon content of X210Cr12 steel is high,which makes this material hard and brittle.

Cold Work Mould Steel Round Bar And Plate D2 / 1.2379 ...

Quality Cold Work Tool Steel manufacturers & exporter - buy Cold Work Mould Steel Round Bar And Plate D2 / 1.2379 / SKD11 / Cr12Mo1V1 from China manufacturer.

d2 DIN 1.2379 tool steel - srilankasports.org

D2 Tool Steel 1.2379 X153CrMo12 Cr12MoV SKD11. SAE D2 tool steel is a high carbon (1.4-1.6% C), high chromium Cold tool steel (11-13% chrome), and with Very high wear resisting properties, heat treatment can be reached to 60-62 HRc.

1.2379 Alloy Tool Steel - cafethuys.nl

1.2379 Tool Steel - Delivered Nationwide by West Yorkshire ...1.2379 steel suppliers and stockholders delivering to the whole of the UK. West Yorkshire Steel are suppliers of 1.2379 high carbon, high chromium tool steel in round bar, plate, sheet and block which can be bandsaw cut to your requirements.Steel Hardness Converter · Spring Steel · BS Steel · En Steel · Steel Weight Calculator ...

1.2311 steel plate | P20 | 3Cr2Mo Plastic tool steel ...

1.2311 tool steel round bar and flat sections can be cut to your required sizes. 1.2311 tool steel ground bar can also be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. 1.2311 tool steel is also available as Ground Flat Stock / Gauge Plate, in standard and nonstandard sizes.[PDF]

General Catalog of TOOL STEELS - 日立金属株式会社

1.2379 1.2510 1.3343 1.3243 1.3244 D2 O1 W5 A4 M2 M3:2 SKH40 SKH55 SKH51 SKS93 SKS3 SKD11 Grade S:0.05 ... For general heavy plate use For general sheet use For general heavy plate use Male die Female die Male die Female die ... Carbon tool steel for small production to be quenched in oil. Improved SK105 grade for its hardenabillty.

mould steel flat bar - hopkinsplasticsurgery

1.2379 / X153CrMoV12 Steel - Cold Work Tool Steel | … DIN 1.2379 / X153CrMoV12 Die Steel Supplied in Round / Flat Bars, Plates, Blocks. Equivalent Grades: D2, SKD11. Quality Chemical Composition & Mechanical Properties. ... 1.2379 / X153CrMoV12 DIN 1.2379 / X153CrMoV12 Steel is a high carbon and high ...

Tool Steel Suppliers - Industrial Metal Supply

Tool steel bar is, as the name suggests, often used to produce tools (among other applications). Tool steel is known for its extreme hardness, as well as it abrasion resistance and ability to hold a cutting edge at high temps. Industrial Metal Supply offers tool steel bar in O-1 and A-2 grades.

Mould Steel - Dongguan City Song Shun Mould Steel …

China Mould Steel catalog of Hot Forging D3 1.2080 Mould Steel Cold Work Plate, High Strength Steel H13 1.2344 Steel Sheet Price Per Kg provided by China manufacturer - Dongguan City Song Shun Mould Steel Products Co., Ltd., page1.

SKD11 Tool Steel Plate SKD11 Material - srilankasports.org

1.2379 tool steel china supplier and wholesalers , Otai Special Steel supply the 1.2379 in Round bar, Plate, Flat bar, Square bar, and others customize sharp, steel sections and form. Contact Email [email protected] 1.2379 alloy steel material properties as below. Related Specifications ASTM A681-1999 JIS G4404 GB/T 1299

Buy 1.2379 Alloy Steel Forging Provider - pond-pro

steel price of Competitive price 1.2379 tool steel,q235 ...Forged D2 skd11 1.2379 Alloy Steel Round Forging. D2 Tool Steel | 1.2379 | SKD11 Tool Steel - Otai Special Steel. D2 Tool Steel Material Application AISI grade D2 tool steels are used for long run tooling applications, where wear resistance is important, such as blanking or forming dies and thread rolling dies.

China Promotional Hot Rolled Special Tool Steel Plate for ...

Steel Plate, alloy steel sheet, steel products manufacturer / supplier in China, offering Promotional Hot Rolled Special Tool Steel Plate for Cutting Tools (1.2379 D2 SKD11), Black Surface Hot Rolled High Speed Steel Round Bar (SKH2 T1 1.3355 W18Cr4V), Structural Special alloy High Speed Steel Plate for Cutting Tools (1.3247 M42 SKH59) and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.