Tel: +86-371-86151827

cold rolled low alloy high strength steel plate

Steel grade:cold rolled low alloy high strength steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled low alloy high strength steel plate Introduction

Cold Rolled Low alloy High Strength Steel Strip

· PDF Designation: A 1011/A 1011M – 07 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength1 This standard is issued under the fixed ...

High Strength Low Alloy Steel - imoa.info

HSLA steels are available today with traditional ferritic-pearlitic, bainitic, martensitic and multiphase microstructures, each available in hot- or cold-rolled steels. The yield strength of contemporary HSLA steels ranges from 260 MPa to over 1000 MPa.

ASTM A1008 Cold Rolled Sheet - Discount Steel

ASTM A1008 Cold Rolled Sheet – Order Large or Small Quantity Online – Cut to Size Cold Rolled Sheet – No Minimum Order ... (Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability and Solution Hardened) Alloy: Commercial Quality/1008.

Steel Warehouse Company: Cold Rolled Strip

Steel Warehouse offers a wide range of cold rolled alloy, high carbon, low carbon and high strength low alloy close tolerance strip steel. Equipment Four high reversing mill , automatic thickness control, powdering, Vacuum - Dry rolling solution removal, thickness range - 0.016 / 0.187"(grade dependent), width range - 10.0" / 28.0"

Buy High Strength Low Alloy Plate From Top Steel Supplier ...

Strength level is above 500 Mpa, low carbon alloy steel plate is not able to meet the requirements, low carbon bainite steel plate is developed. Added with elements such as Cr, Mo, Mn, B, to help steel plate in forming bainite organization, makes it with higher intensity, plasticity and good welding performance, it's mostly used in high pressure boiler, pressure vessel, etc.

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel.HSLA steels vary from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties.Classifications·

Supply high strength low alloy steel plate with best materials

Applications of Low Alloy Steel Plate: The A36 steel plate is extensively used in a variety of industries. The A572 is widely used in structural applications, including bridges, buildings and construction equipment and more. The A656 steel plate is used in construction equipment, crane booms, truck frames and general fabrication.

High Strength Low Alloy Steel Plate - INFRA-METALS

ASTM A514 – Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding. This specification covers quenched and tempered alloy steel plates of structural quality intended primarily for use in welded bridge construction and other structures.

Cold Rolled Low alloy High Strength Steel Strip

· PDF Designation: A 1011/A 1011M – 07 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength1 This standard is issued under the fixed ...

ASTM A1008 Cold Rolled Sheet - Discount Steel

ASTM: ASTM A1008 (Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability and Solution Hardened) Alloy: Commercial Quality/1008. Characteristics: Oiled surface, smooth grey finish. Workability: Excellent candidate for most processing techniques. Good drawing and spinning attributes.

Steel Dynamics, Inc. - Cold Rolled Steel Sheet

SAE J403 cold-rolled carbon- and alloy-steel sheet. SAE J1392 and SAE J2340 cold-rolled high-strength, low-alloy carbon-steel sheet. JIS G3135 cold-rolled high-strength carbon-steel sheet with improved formability for automotive applications. JIS G3141 cold-rolled steel sheet for general forming.

Supply high strength low alloy steel plate with best materials

Applications of Low Alloy Steel Plate: The A36 steel plate is extensively used in a variety of industries. The A572 is widely used in structural applications, including bridges, buildings and construction equipment and more. The A656 steel plate is used in construction equipment, crane booms, truck frames and general fabrication.

Alloy | Chatham Steel

Alloy: High Strength: Quenched and tempered alloy steel plates used primarily for their high yield-t0-weight ratio. 100,000 min. yield: ASTM A-514 Construction Grade: 3/16" to 6" 4'x8' through 10'x40' Abrasion Resistant: As-Rolled AR steel, not quenched and tempered, for moderate wear applications: AR 225/235: 3/16" to 1" 4'x8' through 8'x20'

Steel Warehouse Company: Cold Rolled Strip

Cold Rolled Strip. Steel Warehouse offers a wide range of cold rolled alloy, high carbon, low carbon and high strength low alloy close tolerance strip steel.

China Q345b High Strength Low Alloy Structure Steel Plate ...

Steel Plate, Steel Sheet, Hot Rolled Plate manufacturer / supplier in China, offering Q345b High Strength Low Alloy Structure Steel Plate (Q345B), B500b Reinforced Deformed Steel Bar, High Quality Deformed Steel Bars HRB400! ! ! Deformed Steel Bar! ! ! Deformed Steel …

Carbon Steel, High-Strength-Low Alloy, Stainless Steel ...

Hot Rolled High Strength Low Alloy Sheet: A Hot Rolled Sheet which offers a much higher Yield Strength and more corrosion resistance than a Hot Rolled Commercial Quality Sheet. These sheets are two to four time more corrosive resistant than low carbon steel sheets and offer a Yield Strength …

Products – American Metals Corporation

Plate. 3/16” through 12” thick; A36 Standard specification for carbon structural steel hot rolled and pickled and oiled (up to ½”); 572-50/65 Standard specification for high-strength low-alloy steel; A588 Standard specification for high-strength low-alloy steel – weathering application; 656-80 & 715-80 High Yield; 516-70 Standard specification for pressure vessel plates, carbon steel ...[PDF]

High-Strength Low-Alloy Steels - ASM International

High-strength low-alloy steels include many standard and proprietary grades designed to provide specific desirable combinations of properties such as strength, toughness, formability, weld-ability, and atmospheric corrosion resistance. These steels are not consid-ered alloy steels, even though their desired properties are achieved by the[PDF]

Section F - emjmetals

High strength low alloy (HSLA) steels are essentially low carbon steels to which have been added small amounts of such alloying elements as chromium, nickel, …

Cold-formed steel - Wikipedia

Cold-formed steel (CFS) is the common term for products made by rolling or pressing steel into semi-finished or finished goods at relatively low temperatures (cold working). Cold-formed steel goods are created by the working of steel billet, bar, or sheet using stamping , rolling (including roll forming ), or presses to deform it into a usable ...History·

Standard Specification for Hot-Rolled Carbon, Low-Alloy ...

1.1 This specification covers carbon, low-alloy, high-strength low-alloy, and alloy steel hot-rolled floor plates for flooring, stairways, transportation equipment, and general structural purposes. While it is generally provided in the as-rolled condition, floor plate also may be provided in the heat-treated condition, depending on the material specification.

Plate - Rolled Alloys, Inc.

AL-6XN® alloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing "super-austenitic" stainless alloy. The AL6XN alloy was designed to be a seawater …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.