Tel: +86-371-86151827

steel sheet piling steels

Steel grade:steel sheet piling steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel sheet piling steels Introduction

Steel Sheet Piling | Gerdau

Steel sheet piling is a rolled structural steel section with interlocks on the flange tips which enable the joining of sections to form a continuous wall. Gerdau sheet piling has been successfully used in both permanent and temporary applications that cover the entire range of projects in the construction industry:PZC – Z-Profile · PS Flat Sheet · Resources · Contact

Steel Sheet Piling | nucorskyline

Steel sheet piles are long structural sections with a vertical interlocking system that creates a continuous wall. The walls are most often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall ...

Steel Grades (HR) - ArcelorMittal - Sheet Piling

For steel grades of cold formed sheet piles, see link below. Special steel grades such as S 460 AP as per internal mill specification, American ASTM A572 steel grades, steels with improved corrosion resistance, such as AMLoCor ® and ASTM A690, or steels with copper addition in accordance with EN 10248 – Part 1, Chapter 10.4, can be supplied ...

LBFoster US | Steel Sheet Pile

Steel sheet piling is a manufactured construction product with a mechanical connection "interlock" at both ends of the section. These mechanical connections interlock with one another to form a continuous wall of sheet piling. Steel sheet pile applications are typically designed to create a rigid barrier for earth and water, while resisting the ...

Hammer & Steel | Steel Sheet Piling, "Z" & Flat Section ...

Hammer & Steel sells and rents Grade 60 steel sheet piling which can give improvement of 20% in design life compared to a sheet pile in grade 50 steel. Flat Sheet Piling Typically used for circular cell design applications, flat sheet piling is a proven technology that is still used on many projects.

Steel Sheet Piling Corrosion and Protection - Pile Buck ...

Special Steels . Adding certain alloys to carbon steel can enhance its performance in some marine environments; however, the application of weathering steels to sheet piling projects has not been practical because of its limited benefits in relation to cost. Photo Credit: Meever. Wales, Tie Rods, and Anchor Protection

ESC Steel LLC - Steel Sheet Piling, Pipe Piles, H-Piles

ESC Steel Provides High Grade Steel Piling Products to USA at competitive prices and termssuch as Sheet Piles, Pipe Piles, Tie Backs, H Piles & Combined Walls.

Steel Sheet Piling Cost and Bidding [iSheetPile] - Think ...

To simply pick a specific steel section and use the attributes of this piece of steel as the design parameters for the project will limit the options of the bidders and result in a much higher cost to the owner. Here are two examples of how your engineer may want to properly specify steel sheet piling:

Shoreline Steel - Official Site

Shoreline Steel. Shoreline Steel began manufacturing steel piling in 1983 and has established a worldwide reputation as a provider of quality, American made, steel sheet piling. We operate four mini-mill roll forming operations that produce 30 different piling sections in six different configurations.[PDF]

Steel Sheet Piling Design Manual - mcipin

Steel Sheet Piling Design Manual Notice “The information, including technical and engineering data, figures, tables, designs, drawings, details, suggested procedures, and suggested specifications, presented in this publication are for general information only. While every ef-fort has been made to insure its accuracy, this information should ...

Steel Sheet Piling Corrosion and Protection - Pile Buck ...

Special Steels . Adding certain alloys to carbon steel can enhance its performance in some marine environments; however, the application of weathering steels to sheet piling projects has not been practical because of its limited benefits in relation to cost. Photo Credit: Meever. Wales, Tie Rods, and Anchor Protection

Steel Sheet Piling Cost and Bidding [iSheetPile] - Think ...

To simply pick a specific steel section and use the attributes of this piece of steel as the design parameters for the project will limit the options of the bidders and result in a much higher cost to the owner. Here are two examples of how your engineer may want to properly specify steel sheet piling:

Steel Sheet Piling Solutions | Big R Bridge

Big R’s Steel Sheet Piling is roll-formed for a continuous, positive interlock. If you are looking for optimum performance in steel piling, look no further than Steel Sheet Piling from Big R Bridge. Because it is roll-formed, it offers a positive interlock along its full length for piling …

Shoreline Steel | Sheet Piling Specifications

Shoreline Steel operates four mini-mill roll forming operations that produce 30 different steel sheet piling sections in six different configurations.

Steel foundations - ArcelorMittal - Sheet Piling

Steel sheet piles used as retaining structures can also transfer significant vertical loads to the soils through friction and point bearing. A combined wall with Z or U-box piles can be chosen to increase the friction surface along the wall, as well as the toe bearing capacity.

Steel Sheet Piling Prices,Sheet Piles For Sale,Sheet Pile ...

China Shunli Steel Piling is the largest sheet pile manufacturer/supplier in the world .wholesale various high quality sheet piling prices products from shunli sheet piling suppliers and steel sheet piling for sale. Including steel sheet piles wall,cold formed steel sheet piles.Shunli Sheet Piles for sale around the world.We are also trench sheet piling and Omega steel pile manufacturers,U/Z ...

Z-Profile Steel Sheet Piling | Gerdau

The Ball-and-Socket Interlock continues to be the preferred interlock by piling contractors and engineers. Gerdau PZC™ sheet piling sections are produced with the ball-and-socket interlock at our mill in Petersburg, Virginia. The advantages of the ball-and-socket interlock are: Most rugged, durable, and flexible interlock available.

Sheet Piles - Steel Piling Group

The advantages of steel sheet piles can be summarised as follows: Construction is significantly quicker than that for reinforced concrete walls. Permanent sheet piling is a narrow form of construction, which can be installed close up to the boundary of the site maximising usable site space. Steel sheet piles are suitable for all soil types.

Standard Specification for Steel Sheet Piling

This specification covers carbon steel sheet piling of structural quality for use in the construction of dock walls, sea walls, cofferdams, excavations, and similar applications. When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel …[PDF]

Section 512 Steel Sheet Piling - wisconsindot.gov

512.2.2 Temporary Steel Sheet Piling (1) Furnish temporary steel sheet piling with a section modulus equal to or greater than the plans show. Extend one foot or higher above the retained grade unless the plans show a greater height. The contractor may employ used steel sheet piling in good condition instead of new material. Remove and

steel sheet piling | eBay

Find great deals on eBay for steel sheet piling. Shop with confidence. Skip to main content. eBay Logo: Shop by category. Shop by category. ... 1913 Lackawanna Steel Company Ad - Sheet Piling. $16.99. Buy It Now. Free Shipping. USS Steel Sheet Piling Design Manual . Pre-Owned. $19.99. Buy It Now.[PDF]

Steel Sheet Piling - pdhonline

in all cases hot-rolled steel sheet piling provided the most economical, structurally feasible solution to the design constraints of the above projects. The following provides both a general discussion of the design and analysis of steel sheet pile walls and the basis for the final solutions derived for each of the projects. General Description

ESC Steel LLC - Steel Sheet Piling, Pipe Piles, H-Piles

ESC Steel Provides High Grade Steel Piling Products to USA at competitive prices and termssuch as Sheet Piles, Pipe Piles, Tie Backs, H Piles & Combined Walls.

Steel Sheet Piling | JD Fields | Steel Tube Manufacturers ...

Cold Rolled Steel Sheet Piling; Steel Piling. Market a wide range of Steel Piling products. Tubular Steel Suppliers. Our Construction Products division inventories and markets a broad range of carbon steel products, including H Bearing Piles, Hot Rolled Piling, Cold Formed Piling and Pipe Piling of all sizes. ... Cold Formed Sheet Pile (2 ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.