Tel: +86-371-86151827

asme sa633 grade e steel plate

Steel grade:asme sa633 grade e steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

asme sa633 grade e steel plate Introduction

ASME SA633 Grade E steel plate - sa204steel

ASME SA633 Grade E structural steel plate application : SA633 Grade E steel plate is mainly used in oil, chemical, power station, boiler and other industries, for the production reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum Gas ...

ASME SA633 Gr. E/SA633 Grade E structural steel plates ...

ASME SA633 Gr. E/SA633 Grade E structural steel plates are particularly suited for service at low ambient temperatures of −50°F [−45°C] and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired.

ASME SA633 Gr. E/SA633 Grade E high strength low alloy ...

ASME SA633 Gr. E/SA633 Grade E high strength low alloy HSLA steel plates provide a minimum yield point of 60 ksi [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. to 6 in. [100 to 150 mm], inclusive.

ASME SA633 steel coil - steelplatesforsale

Sell and export ASME SA633/SA633M steel coil - Grade A, Grade c, Grade D and Grade E with chemical and mechanical properties. Contact us for width, length, thickness and solutions.

ASME SA633 Gr.C/SA633 Grade C structural steel plates ...

ASME SA633 Gr.C/SA633 Grade C structural steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel ...

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

ASME SA633 Grade A HR plate - pressure vessel steel plate ...

ASME SA633 Grade E low alloy steel plate specification ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm. ...

ASME SA633 Grade A steel plate - sa204steel

ASME SA633 Grade A structural steel plate application : SA633 Grade A steel plate is mainly used in oil, chemical, power station, boiler and other industries, for the production reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum Gas ...

SA633 Grade E steel plate,SA633 Grade E steel sheet - JOIN ...

Heat treatment of ASME SA633 Grade E steel sheet /plate maybe subjected to normalling,quench-hardening and tempering,or tempering as necessary .Further ,thermomechanical control,or appropriate heat treatment may be applied upon the purchase . Standard: ASME SA-633/SA-633M.

ASTM A633 Grade A C D E for Sale - steelplatecuttingpart

ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates. ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade: ASTM A633Grade A,C,D,E (A633GRA, A633GRC, A633GRD, A633GRE)

A633GrE,A633 Grade E,A633GrE PLATE - Mild steel plate ...

Low alloy high strength steel plate A633 Grade E is in steel standard ASTM A633/A633M.For the thickness above 75mm,low alloy steel plate A633Gr.E need to be done double normalized.For steel plate A633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel plates can reach 350mm with ...

ASTM A633 Marine & OffShore Steel Plate | BBN Steel

A633 is a normalized high-strength low-alloy structural steel plate. It is suited for service at low ambient temperatures of —50°F or higher where notch toughness better than expected is desired.

ASME SA633 Gr A carbon steel - pressure vessel steel plate ...

ASME SA633 Gr. E/SA633 Grade E structural steel plates . ASME SA633 Gr. E/SA633 Grade E structural steel plates are particularly suited for service at low ambient temperatures of −50°F [−45°C] and higher where notch toughness better than that expected in as-rolled material of a comparable strength level is desired.

ASTM A131 Grade E Steel Plate, ASTM A131 Grade E, ASME …

ASTM A131 GR.E Shipbuilding Steel Plates, machining parts is fabricated by the general strength steel material. ASME SA131 Grade E Plate is widely used for building decks of ships, vessels and boats, other normal repairing works in shipyards.We offer SA131 Grade E plate …

HSLA steel plate SA633 Grade E,SA633GrE,SA633 Gr.E--Xin ...

Low alloy high strength steel plate SA633 Grade E is in steel standard ASME SA633/SA633M.For the thickness above 75mm,low alloy steel plate SA633Gr.E need to be done double normalized.For steel plate SA633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel plates can reach 350mm with ...

ASME SA633 Grade C HR plate - pressure vessel steel plate ...

ASME SA633 Grade E low alloy steel plate specification ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm. ...

China ASME SA633 Grade A steel plate - pressure vessel ...

Offer ASME SA633 Grade A low alloy steel plate stock. low allory steel stock price and supplier,BBN steel offer ASME SA588 GrC corten proofing atmospheric corrosion resistance steel plate steel grade,offer A36,A283Grade C,A572Grade 50,S235JR,S355JR,S355J2 low allory steel stock,as China low allory steel supplier in China,keep SS400,SM570,St37-2,St52-3,Q235B,Q345B/D steel materials.

ASTM A633/SA633 Normalized Low Alloy Structural Steel ...

Tianjin TEDA Ganghua Trade Co., Ltd. SA633, SA633 Grade E, SA633 Gre manufacturer / supplier in China, offering ASTM A633/SA633 Normalized Low Alloy Structural Steel Plate Grade A/C/D/E, Bulk Micron Thickness Aluminum Foil, Micron Aluminum Foil and so on.

Professional ASME SA514 Grade E steel sheet supplier ...

Superior Steel Oveseas is prominent manufacturer, supplier & exporter of ASME SA514 Grade B Steel Plates, is a type of high strength alloy steel which has been mill heat treated. Carbon Steel ASME SA514 GR.B Tempered Steel Plates is roughly three times stronger than plain carbon steel.Grade B, Grade S and Grade E are by far the most common, however, we have other grades available.Each grade …

ASTM A633 Marine & OffShore Steel Plate | BBN Steel

A633 is a normalized high-strength low-alloy structural steel plate. It is suited for service at low ambient temperatures of —50°F or higher where notch toughness better than expected is desired.

ASTM A517 Grade B F Steel Properties/ASME SA517

Tensile properties of the steel plate shall meet the specified values for tensile strength, yield strength, and elongation. The material shall undergo mechanical tests such as tension test and transverse Charpy V-notch impact test.ASTM A517/A517M standard main steel grade:ASTM A517 Grade A,B,E,F,P,H,Q

ASME SA553, SA553 Steel - JOIN WIN STEEL - Steel Plate…

Location: Join-win steel > steel plate / sheet > ASME SA-553/SA-553M Q & T 8% and 9% Ni-alloy steel plates for pressure vessels. Standard: ASME SA-553/SA-553M Steel Grade : SA553 type I, SA553 type II ... What's the chemical composition of ASME SA517 Grade E steel plates?

A633 Steel Plate - ASTM A633 Gr. C Supplier | Universal ...

universalsteelamerica› …› ASTM Structural PlatesSteel Grade Equivalents; ... ASTM A633 Plate. Home Steel Plate Products ASTM Structural Plates A633 Plate A633 Plate. Universal Steel stock A633 Gr. C from ¼” to 4” thick. A633 is provided in the normalized condition, with additional Charpy testing (CVN). A633 is used in structural applications where notch toughness is critical, and it is ...

SA633 Gr.D steel coil data sheet-Bebon Steel top steel ...

As the famous supplier of ASME SA633 Gr.E steel plate in China, Katalor can provide the standard size ASME SA633 Gr.E steel plate and non-standard ASME SA633 Gr.E steel plate to … ASTM A633 GR C alloy steel plate - boilersteelplates. Popular Products of A633 Gr A, A633 Gr C, A633 Gr D, A633 Gr E, steel plate by Steel Profiles - Henan Gang ...

supplier of asme sa 633 sa 633m …

asme sa 633 sa 633m suppliers - pond-proASME SA633 Gr A material - steelsupplyonlineBBN steel supply ASME SA633 Gr.E steel . As top 5 ASME SA633 Gr.E steel plates supplier in China, BBN steel can not only provide standard size ASME SA633 Gr.E steel plates, but can also supply non s. Get Price. 2018-4-10; ASTM A 633/A 633M ASME SA 633/SA

SA633 Grade A carbon and low-alloy steel in Tunisia

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel ... ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.