Tel: +86-371-86151827

s31008 hot rolled wear resistant steel plate ar500

Steel grade:s31008 hot rolled wear resistant steel plate ar500

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s31008 hot rolled wear resistant steel plate ar500 Introduction

AR400 & AR500 Wear Plate & Bar | Specialty Steel Co.

Typical Properties of AR500. AR500 is a “thru-hardened”, abrasion resistant, alloy wear plate. Hardness range is 470/540 BHN with a nominal hardness of 500 BHN. This plate product is intended for use in applications where a good balance of impact, toughness and abrasion resistance are required.

Hot Rolled Abrasion Resistant AR500 Plate 3/8" – Real Steel

AR500 is quenched & tempered through hardened wear resistant grades of abrasion resistant steel plate used for severe impact and abrasion. This product requires a custom quote. Use the form below and we'll contact you as soon as possible with pricing.

Wear resistant steel plate AR360, AR400, AR500, NM360 ...

Jin Chao Yang can supply Wear resistant steel plate AR360, AR400, AR500, NM360, NM400, NM500 with Executive Standard:JIS G4051, GB711, YB/T107, ASTM, welcome to inquiry

AR500 Steel Plate| AR500 Abrasion Resistant Steel Plates ...

prosaic steel & alloy is highly acclaimed manufacturer. su[plier, stockholder, distributor,in ar500 steel plate, ar500 abrasion resistant steel plates, ar500 wear resistant steel plates, 500hb wear plate,ar500 abrasion resistant steel, ar500 abrasion resistant steel, ar500 weare resistant steel plates, most trusted supplier of ar500 steel plates in india

1Cr17Mn6Ni5N hot rolled wear resistant steel plate ar500

1Cr17Mn6Ni5N hot rolled wear resistant steel plate ar500 steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. 1Cr17Mn6Ni5N hot rolled wear resistant steel plate ar500 can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel.

AR500 Plate - Abrasion Resistant Plate | Specialty Steel Co.

We stock AR500 Wear Plate in sizes from 1/4″ thick up to and including 2″ thick. Call or Email Us For a Free Quote. This material is an Abrasion Resistant, Thru-Hardened, Alloy Wear Plate. Hardness range of this high abrasion resistant and impact wear plate is 470-540 BHN. Stocking inventory includes 48″ x 96″ up to 96″ x 288″.

Ar500 Wear Steel Plate - alibaba

Ar500 Wear Steel Plate , Find Complete Details about Ar500 Wear Steel Plate,Ar500 Wear Steel Plate,Ar500,Resistant Steel Plate from Supplier or Manufacturer-Shandong Kunda Steel Co., Ltd. MENU ... Hot Rolled. Surface Treatment: Coated. Application: used in mining machinery,

Cutting AR500 – ShootSteel Inc.

AR500 steel is an abrasion resistant steel often used in mining, material handling and other high wear applications. Due to its material properties AR500 steel also makes great rifle grade targets. The steel is actually quite different than the usual Cold Rolled and Hot Rolled varieties you may find at …

AR500 Plate - Abrasion Resistant Plate | Specialty Steel Co.

We stock AR500 Wear Plate in sizes from 1/4″ thick up to and including 2″ thick. Call or Email Us For a Free Quote. This material is an Abrasion Resistant, Thru-Hardened, Alloy Wear Plate. Hardness range of this high abrasion resistant and impact wear plate is 470-540 BHN. Stocking inventory includes 48″ x 96″ up to 96″ x 288″.

1Cr17Mn6Ni5N hot rolled wear resistant steel plate ar500

1Cr17Mn6Ni5N hot rolled wear resistant steel plate ar500 steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. 1Cr17Mn6Ni5N hot rolled wear resistant steel plate ar500 can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel.

Abrasion Resistant Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsAbrasion Resistant steel plate is typically made in the as-rolled condition. and have been developed specifically for long service life in harsh conditions. AR steel plate is typically made in the as-rolled condition. We offer various thicknesses, lengths, and widths of abrasion resistant steel plate to meet your specifications. Request a quote today!

Construction Materials Hot Rolled X120mn12 Ar500 Wear ...

Find construction materials hot rolled x120mn12 ar500 wear resistant steel plate here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and …

China Hot Rolled Steel Material Ar450 Ar500 Wear Resistant ...

Steel Plate, Wear Steel Plate, Wearing Steel Plate manufacturer / supplier in China, offering Hot Rolled Steel Material Ar450 Ar500 Wear Resistant Steel Plate, Factory Direct Sell Carbon Checkered Steel Plate, Q235 Carbon Steel Checkered Sheet From China and so on.

China Ar500 Hot Rolled Marine Wear Resistant Steel Plate ...

Marine Wear Resistant, Ar500 Steel Plate, Wear Resistant Plate manufacturer / supplier in China, offering Ar500 Hot Rolled Marine Wear Resistant Steel Plate, 4140 4130 4150 Scm440 Scm435 ASTM A36 A105 S20c S45c Forged Steel, 1045 4140 4340 4130 Steel Bar and so on.

AR400 Wear Bar | Wear Plate | Associated Steel Corporation

Associated Steel carries an excellent selection of wear products suited to meet the needs of your most demanding maintenance applications, including 400BHN and 500BHN wear plate and strips, 600BHN abrasion resistant i.d. pipe, chromium carbide overlay and 14% manganese.

China Ar400 Ar500 Steel Plate Wear Resistant Steel Plate ...

Steel Plate, Wearing Steel Plate, Abrasion Resistant Plate manufacturer / supplier in China, offering Ar400 Ar500 Steel Plate Wear Resistant Steel Plate, Building Material Zinc Coated Galvanized Corrugated Steel Roofing Sheet, Hot DIP Galvanized Corrugated Steel Roof Sheet for …

Nm360 Nm400 Ar500 Wear Resistant Steel Plate Hot Rolled

Wear Resistant Steel Plate, Wear Resistant Plate, Wear Resiatant Sheet manufacturer / supplier in China, offering Nm360 Nm400 Ar500 Wear Resistant Steel Plate Hot Rolled, 1.5mm Stainless Steel Sheet SS304 316L 310S 321 Stainless Plate, Shs Rhs Gi …

Hardox® wear plate- Wear and abrasion resistant steel - SSAB

Originally intended as wear plate, it turns out that Hardox® steel can act as a load-carrying part in many applications due to its unique combination of hardness and toughness. With Hardox® wear plate, you can design structures that are wear-resistant, strong and lightweight, all at the same time.

8-100mm Wear Resistant Steel Plate NM400,NM500,AR400 ...

Abrasion Resistant Steel Plate (Abrasion Resistant) Steel Plate is used in the manufacture of numerous products; Conveyors, Chutes & Liners and Aggregate Containers are a few examples of uses for this material. Typically, this steel plate is made in the as-rolled condition. Hardening agents such as carbon and manganese are used in the make-up ...

wear resistant steel plate ar500, View wear resistant ...

Packaging Details wear resistant steel plate ar500 Standard export seaworthy package,or as required. *Wooden Box. *Wooden Pallet. *Woven Bag with Bundle in …

Abrasion Resistant AR500 Steel Plate

AR400 AR450 AR500 AR600 Wear / Abrasion Resistant Steel Plate / AR Steel Plates We are the prominent manufacturer, exporter, trader & supplier of a wide range of Abrasion Resistant Steel Plate. The offered steel plates are manufactured by using best quality materials under the observation of …

hot rolled ar400 steel plate price for target - w3s.in

Ar400 Steel Price, Wholesale & Suppliers - AlibabaST52 S355 AR400 12 mm hot rolled carbon steel plate prices. US $600-800 ... AR400 NM400 HARDOX400 QUARD400 Wear Resistant Steel Plate ar400 steel plate for sale,it can be used to make target, we have both plate and gong targets 1 AR400 NM400 is high strength wear resistant steel plate, it has high wear resistance, brinell hardness …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.