Tel: +86-371-86151827

astm a709 heavy steel platethickness: 0 5 100mm

Steel grade:astm a709 heavy steel platethickness: 0 5 100mm

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a709 heavy steel platethickness: 0 5 100mm Introduction

A709 Grade 50,A709Gr50,A709Gr50 PLATE - Mild steel plate ...

ASTM A709GR.50 steel plate is a kind of low alloy structural steel which is for building bridges in normal constructions.For a better weathering resistance,generally steel plate A709 Grade 50W is better used for outside situiations.When rolling these steel materials A709 Grade 50,for each reduction of 0.01% below the specified carbon maximum,an increase of 0.06 manganese above the specified ...

ASTM A709 - SSAB high-strength steel

ASTM A709. The ASTM A709 is the Standard Specification for Structural Steel for Bridges and encompasses carbon, high-strength low-alloy, and quenched and tempered alloy steels used as structural plates in the construction of bridges. SSAB offers the following five grades of A709; 36, 50, 50W, HPS 50W and HPS 70W.

A709 Heavy Steel Plate - ASTM 709 Heavy Plate | Leeco ...

leecosteel› Steel Plate Products› Heavy Steel PlateLeeco Steel offers A709 heavy steel plate is primarily used in the manufacture of bridges. We offer A709 heavy steel plate in the grades 36, 50 and 50W because they are grades are often specified with Charpy tests referencing the specific zone. We offer various thicknesses, lengths, and widths to meet your specifications. Request a quote today!

ASTM A709 Grade HPS70W steel - heavy-steels

ASTM A709 Grade HPS70W steel specification covers carbon and high-strength low alloy steel structural shapes, plates and bars, and quenched and tempered alloy steel for structural plates intended for use in bridges.. ASTM A709 Grade HPS70W material chemical composition:

A709 Structural, Carbon & HSLA Steel Plate - BBN Steel

BBN Steel stocks A709 Grade 36, A709 Grade 50 and A709 Grade 50W. These grades are often specified with Charpy tests referencing the specific zone or lowest anticipated service temperature. The Charpy tests are specified as non-fracture critical, which is a per-heat test (frequency "H"), or fracture critical, which is a per-plate test ...

ASTM A709 Grade 50,A709 Gr.50 steel plate__Steel Supplier

Gangsteel is specialized in supplying ASTM A709 steel plate in A709 Grade 50. For more information of A709 Grade 50steel plates, please check them in following:. Chemical composition % of the Product analysis of A709 Grade 50

ASTM A709 / A709M - 18 Standard Specification for ...

A709 / A709M-18 Standard Specification for Structural Steel for Bridges steel plates~ steel bars~ Products and Services / Standards & Publications / Standards Products. ASTM A709 / A709M - 18 Standard Specification for Structural Steel for Bridges. Active Standard ASTM A709 / A709M | Developed by Subcommittee: ... ASTM A709 / A709M-18, ...[PDF]

HPS 100W: High Strength Steels for Bridges

(100 mm) in thickness. This grade has been produced in full-sized ... 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 HPS 100W bridge in Nebraska. Photo: Professor Atorod Azizinamini. Welding ... HPS 100W was added to ASTM A709-04a and later editions and in AASHTO M270-05 and later. This steel would be …

China Building Material A709 Gr. 50 Alloy Steel Plate ...

Steel Plate, ASTM Steel Plate, Q690d Steel Plate manufacturer / supplier in China, offering Building Material A709 Gr. 50 Alloy Steel Plate, Weather Resistant Steel Plate/Corten Steel Sheet/Corten Steel Plate, Cr Hot DIP SGCC Galvanized Zinc Steel Coil and so on.[PDF]

CHATHAMSTEELCORPORATION 25 HOT ROLLED BLACK …

CHATHAMSTEELCORPORATION 25 HOT ROLLED BLACK SHEETS COMMERCIALQUALITYA-569 Size(In.) Nom.Thickness WeightPerSheet 7GA x48 x96 (.1793) 240.0(Lbs.) x48 x120 300.0

A709 Grade 100W thickness - MS Plates - napmr.org

Bridge Material Steel Plate Astm A709 Grade 100w , Find Complete Details about Bridge Material Steel Plate Astm A709 Grade 100w,Bridge Material Steel Plate,Astm A709 Steel Plate,Grade 100wsteel Sheet from Steel Sheets Supplier or Manufacturer-Guangzhou Long Sheng Hing Trading Co., Ltd. gas welding small thickness, shape demanding or complex[PDF]

Steel Plate for Bridges - Evraz

ASTM A709/A709M Grade AASHTO M270M/ M270 Grade SI [U.S.] Other Specifications Yield Strength Minimum, ... Grade Plate Dimensions Plate Thickness with CVN Requirements Thickness inches Width inches Length ... are capable of producing plate from 0.375 inches to 5.0 inches, up to 152 inches wide and up to 1100 inches long. Specific dimensional ...

ASTM A709 Grade 100 steel - heavy-steels

When the ASTM A709 Grade 100 steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A 6/A 6M for information on weldability.

A709 Grade 100 sizes - Mild Cold Rolled steel plate

Professional ASTM A709 Gr 36 mild steel plate property . ASTM A514 Steel, grade Q, plate thickness 64 - 120 mm: 7: ASTM A709 Steel, grade 50 and 50W, ≤ 100 mm: 8: quickly access all of the polymers/plastics, metals, ceramics, fluids, and other engineering materials in the MatWeb material property database.

ASTM A709 Steel, grade 36, carbon steel plate (≤ 200 m)

ASTM A709 Steel, grade 36, carbon steel plate (≤ 200 m), Maximum Mn content is 1.35% when notch toughness is specified. Si content 0.15 - 0.40% is required for a plate > 38 mm thick.

astm a709 grade 50 equivalent - Mild Cold Rolled steel plate

ASTM A709 Steel Plate - Grade 36, 50, 50W | Leeco Steel, LLC. ASTM A709 steel plate is primarily used in the manufacture of bridges. Leeco Steel stocks A709 steel plate Grade 36, 50 and 50W. These grades are often specified with charpy tests referencing the specific zone, or climatic region, in which the bridge will be in use.

A709-50W Steel Plate Availability - Bridge engineering ...

eng-tips› …› Constructed Items› Bridge engineering ForumI have several references that conflict each other on the availability of A709-50W steel plate thicknesses. Two references (National Steel Bridge Alliance and the FHWA) both recommend thickness intervals of 1/8" up to 2" thick. ... As a steel fabricator,normally ASTM A709Gr50W (weathering steel plate) can roll max. thickness till 100mm ...

ASTM A709 Steel, grade 36, carbon steel plate (> 200 mm …

ASTM A709 Steel, grade 36, carbon steel plate (> 200 mm wide) ... is specified. Si content 0.15 - 0.40% is required for a plate > 38 mm thick. Similar entries in MatWeb include: ASTM A709 grade 50: Vendors: No vendors are listed for this material. ... may vary with plate thickness: Sulfur, S = 0.050 %

astm a709 grade 50 - myco-com.biz

ASTM A709GR.50 steel plate is a kind of low alloy structural steel which is for building bridges in normal constructions.For a better weathering resistance,generally steel plate A709 Grade 50W is better used for outside situiations.When rolling these steel materials A709 Grade 50,for each reduction of 0.01% below the specified carbon maximum,an ...

A709 Grade HPS 70W,A709GrHPS 70W - Mild steel plate ...

High strength low alloy steel plate ASTM A709 Gr.HPS 70W owned the minimum yield strength at 485 Mpa and tensile strength between 585Mpa and 760Mpa.So steel plate A709Gr.HPS 70W is mainly used under high strength situiations outside or bad weathering owned its weathering resistance property.Now Xinsteel cooperated with Wuyang iron and steel to offer the maximum thickness of A709 Gr.HPS 70W ...

ASTM A36 Steel Plate - A36 Carbon Steel Plate | Leeco ...

leecosteel› Steel Plate ProductsASTM A36 steel plate is one of the most widely used carbon structural steels used in the industry. It can be riveted, bolted or welded in the construction of bridges and buildings, and for general structural purposes. ASTM A36 is known to be an equivalent to EN S275 steel plate.

A709 Grade HPS100W thickness - MS Plates

A709 Grade HPS 100W,ASTM A709 Grade HPS 100W . A709 Grade HPS 100W Structural steel,JW steel keeps more than 10,000 tons GradeHPS100W steel plates in stock each month,we can supply A709 Grade HPS100W,ASTMA709 Grade HPS 100W,ASTM A709 GradeHPS 100W Structural steel for bridge Grade. steel thickness.

A572 Steel Plate | Precision Grinding, Inc.

A572 Grade 50 is dual certified to A709 Grade 50. Carbon Steels A709-50 material is stocked primarily in Flat Rolled Products, but is also available to a lesser extent in Structural and Bar Products. A709-50 ASTM A709 is fracture critical and covers the requirements for structural steel for …[PDF]

05 12 00 - Structural Steel Framing

SECTION 05 12 00 STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.01 SECTION INCLUDES ... (100 mm) Thick 24. ASTM A618 Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing 25. ASTM A668/ Specification for Steel Forgings, Carbon and Alloy, for ... A673M Structural Steel 27. ASTM A709/ Specification for Carbon and ...Authors: Sandra HickeyAffiliation: University of New Hampshire[PDF]

Steel Plate for Bridges - Evraz

ASTM A709/A709M Grade AASHTO M270M/ M270 Grade SI [U.S.] Other Specifications Yield Strength Minimum, ... Grade Plate Dimensions Plate Thickness with CVN Requirements Thickness inches Width inches Length ... are capable of producing plate from 0.375 inches to 5.0 inches, up to 152 inches wide and up to 1100 inches long. Specific dimensional ...

【ASTM A572 Gr. Steel Plates】 A572 Grade 42, Grade 50 ...

Chemtech alloys pvt ltd is stockist of ASTM A572 Gr. Steel Plates - A572 Grade 42, Grade 50, Grade 60, Grade 65 Steel Plates origin from europe , germany, japan, korea, India

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.