Tel: +86-371-86151827

ss mica band heater with nichrome coil

Steel grade:ss mica band heater with nichrome coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ss mica band heater with nichrome coil Introduction

ss mica band heater with nichrome wire - w3s.in

TriVolt | Ceramic Band HeaterCeramic Band Heater. ... Heaters are coiled with Kanthal® wire Nichrome® 60. Manufactured with steatite ceramics. Outer sheet is made with 24 gauge 3042b stainless steel. ... Option of stainless steel braided (SS) lead wire connected to post terminal with high temperature terminal lugs.

ss mica band heater with nichrome wire - cafethuys.nl

ss mica band heater with nichrome wire - alibabaThere are 2 ss mica band heater with nichrome wire suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of ss mica band heater with nichrome wire …

Mica Band Heaters, Ceramic Band Heaters, Cartridge Heaters ...

Mica Band Heaters, Ceramic Band Heaters, Cartridge Heaters, Micro Tubular coil Heaters, Cast-In Heater, Bobbin Heaters, SS Heater, Titanium Heaters, Silica Heaters, Strip Heaters and Plate Heaters, Coil Type Nozzle Band Heaters, Manufacturer, Exporter, Pune, India

TriVolt | Ceramic Band Heater

One-piece construction. Ceramic band with ¼ x 20 post terminal 180° from the gap. Option of tab or barrel nut mounted. All connections are welded on to post terminal. Heaters are coiled with Kanthal® wire Nichrome® 60. Manufactured with steatite ceramics. Outer sheet …

Band Heaters - Ceramic Band Heater Manufacturer from …

Ceramic Band Heater is made of an electrical resistance helical coil, which is inserted around a series of interlocking steatite bricks of 1100°c having physical and die electric strength and good thermal conductivity, covered with 4mm insulation and then wrapped in sheet metal.

Band Heaters | Southeast Thermal Systems | Process Heat ...

MICA BAND HEATERS. Only one set of leads or terminals is needed on theTHINBAND heater, unlike the two sets required on the cumbersome two-piece replacement barrel heaters with straps. QUICK CLAMP opens to fit over barrels and snaps in place with one easy flip of its latching lever. No need to remove other heaters.

ss mica band heater with nichrome wire - cafethuys.nl

ss mica band heater with nichrome wire - alibabaThere are 2 ss mica band heater with nichrome wire suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of ss mica band heater with nichrome wire …

Band Heaters | Southeast Thermal Systems | Process Heat ...

MICA BAND HEATERS. Only one set of leads or terminals is needed on theTHINBAND heater, unlike the two sets required on the cumbersome two-piece replacement barrel heaters with straps. QUICK CLAMP opens to fit over barrels and snaps in place with one easy …

TriVolt | Ceramic Band Heater

One-piece construction. Ceramic band with ¼ x 20 post terminal 180° from the gap. Option of tab or barrel nut mounted. All connections are welded on to post terminal. Heaters are coiled with Kanthal® wire Nichrome® 60. Manufactured with steatite ceramics. Outer sheet …

Mica Band Heaters, Cartridge Heaters, Furnace Heating ...

mica band heaters Mica Band Heaters are built in 'MICA' Insulation with 'L' type clamping and manufactured in M.S. Plated sheet or S.S. outer & Brass inner sheet. These heaters are the most economic & widely used for heating of moulds, dies, nozzles and …

electrical industrial heaters, tubular and d shape heaters ...

Nichrome Ribbon Wound on Mica Former & Insulated With Mica Sheet, Which is Then Sheathed In MS Plated or SS Sheet CERAMIC / REFRACTORY PLATE / STRIP HEATER Heating Coil Supported In Fluted Refractory Insulators And Sheathed in SS / MS Plated Sheets

Mica Band Heater

A mica core produces a thin, efficient heater. Heat from the precisely wound Nichrome element is quickly transferred to the working surface for fast heat-up and response. Mica provides excellent dielectric strength and heat transfer capability for long heater life. The mica core is encased in a continuous corrosion resistant sheath and formed.

Industrial Heaters | Manufacturer from Pune

Since our inception, we have been engaged in manufacturing and supplying an exclusive range of Mica Band Heaters, Ceramic Band Heaters, Energy Saving Ceramic and Mica Band Heaters, Cartridge Heaters, Coil Type Nozzle Band Heaters, Micro Tubular Coil Heaters, Cast-In Heaters, Bobbin Heaters, SS Heaters, Titanium Heaters, Silica Heaters, Strip and Plate Heaters, Tubular Heating …

Band Heaters - Standard Mica Band Heaters Manufacturer ...

With years of experience and knowledge in this domain, we are engaged in offering an excellent range of Standard Mica Band Heaters. Our given band heaters are high on demand among customers for their superior finish. These band heaters are designed from by our professionals using supreme quality components and leading technology.

Nichrome Heater, Nichrome Heater Suppliers and ...

Mica insulated band heaters are constructed by winding a nichrome ribbon around mica insulation and encapsulated in a stainless steel sheath. Working Temperature: up to 350C Shape: Plate & Band Features For mica band heater , Size , Wattage & Voltage are available on request.

Mica Band Heaters - Big Chief Inc.

Mica Band Heaters. A mica core produces a thin, efficient heater. Heat from the precisely wound Nichrome element is quickly transferred to the working surface for fast heat-up and response. Mica provides excellent dielectric strength and heat transfer capability for long heater life. The mica core is encased in a continuous corrosion resistant...

Mica Band Heater - Energy Saving Mica Band Heaters ...

We offer quality Mica Band Heaters, Mica Heaters and Energy Saving Heaters that are manufactured using brass, stainless steel and mild steel. These are available in premium, economy & power saving options as per the requirements of our clients. Further, our heaters find wide application in injection molding, film extruders and all plastic & rubber processing machinery.

INDUSTRIAL MICA BAND HEATER - Heatbird

industrial mica band heater Mica band heaters are efficient and economical solutions to the heating requirements of many applications. Our provided heater is rigorously inspected against numerous well defined parameters to ensure its quality and durability.

Industrial Heater, Ceramic band Heater | Abtech Heaters ...

Abtech Heaters & Controllers is one of the leading manufacturersof of Industrial Heaters like Ceramic Bank Heaters, Tubular Coil Heaters, Mica Band Heaters. Abtech Heaters & Controllers Pvt. Ltd. Plot No A/467, 1st Floor, ... The outer body is made of SS304 Stainless Steel Shealth which provides physical strength and resistance to high ...

Electric Heating Element Stainless Steel Mica Band Heater ...

Electric Heating Element Stainless Steel Mica Band Heater for Extruder Description: 1) GME Ceramic Band heaters are designed and manufactured out of 8 years of experience, for superior performance and life expectancy.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.