Tel: +86-371-86151827

steel sheet x12ni5 steels

Steel grade:steel sheet x12ni5 steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel sheet x12ni5 steels Introduction

X12Ni5 datasheet,X12Ni5 chemical,X12Ni5 heat treatment

Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness. The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties.

France AFNOR X12Ni5 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. X12Ni5 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

X12Ni5 - steel-grades

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties. 1.5680: AFNOR: ... X12Ni5 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

X12Ni5 / 1.5680 Alloy special steel - equivalent, chemical ...

Nickel steels with specified low-temperature properties: EN 10216-4: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. ... Mechanical Properties of steel X12Ni5 (1.5680) Equivalent grades of steel X12Ni5 (1.5680) Tensile Strength, Elongation, Proof strength, Hardness : European Steel and Alloy Grades / Numbers ...

EN 1.5680 (X12Ni5) Nickel Steel :: MakeItFrom

EN 1.5680 steel is an alloy steel formulated for primary forming into wrought products. Cited properties are appropriate for the quenched and tempered condition. 1.5680 is the EN numeric designation for this material. X12Ni5 is the EN chemical designation. It has a moderately high density among EN wrought alloy steels.

DIN X12Ni5 / W-Nr 1.5680 datasheet,DIN X12Ni5 / W-Nr 1 ...

The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.

X12Ni5,X8Ni9,X7Ni9 Nickel alloy steels plate of New Steel ...

X12Ni5,X8Ni9,X7Ni9 Nickel alloy steels with specified low temperature properties. Gloria Steel Limited supply as specialist of 11MnNi5-3(09MnNiDR),produce according to EN10028-4:2003The plates are intended primarily for use in welding low temperature pressure vessels.

X12ni5 Steel Price Sheet Plate - alibaba

X12ni5 Steel Price Sheet Plate , Find Complete Details about X12ni5 Steel Price Sheet Plate,Steel Sheet Price,X12ni5 Steel Plate Price Per Ton,X12ni5 Color Stainless Steel Sheet from Steel Sheets Supplier or Manufacturer-Tianjin Yinyin International Trade Co., Ltd.User rating: 5/5

X12ni5 Steel Plate, X12ni5 Steel Plate Suppliers and ...

Alibaba offers 85 x12ni5 steel plate products. About 5% of these are steel sheets. A wide variety of x12ni5 steel plate options are available to you, There are 5 x12ni5 steel plate suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of x12ni5 steel …

X12ni5 Steel Plate, X12ni5 Steel Plate Suppliers and ...

Alibaba offers 85 x12ni5 steel plate products. About 5% of these are steel sheets. A wide variety of x12ni5 steel plate options are available to you, There are 5 x12ni5 steel plate suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of x12ni5 steel plate …

X12Ni5,X8Ni9,X7Ni9 Nickel alloy steels plate of New Steel ...

X12Ni5,X8Ni9,X7Ni9 Nickel alloy steels with specified low temperature properties. Gloria Steel Limited supply as specialist of 11MnNi5-3(09MnNiDR),produce according to EN10028-4:2003The plates are intended primarily for use in welding low temperature pressure vessels.

Steel Standard | YAXINDA Steel Pipe

Here is a steel standard table. Our company can produce a wide variety of steel pipes, including hot rolled seamless steel pipe, cold drawn seamless steel pipe, welded steel pipe, square and rectangular steel tube, and more.

Ni-Steel - thyssenkrupp

The transportation and storage of liquid natural gas and other liquid gases however requires extremely low temperatures from down to -320 °F. The water quenched cryogenic nickel steel from thyssenkrupp Steel Europe fulfils all requirements placed on steels for liquid gas containers today.

x8ni9 steel - pressure vessel steel plate grades

X12Ni5,X8Ni9,X7Ni9 Nickel alloy steels plate of New Steel . X12Ni5,X8Ni9,X7Ni9 Nickel alloy steels with specified low temperature properties. Gloria Steel Limited supply as specialist of 11MnNi5-3(09MnNiDR),produce according to EN10028-4:2003The plates are intended primarily for use in welding low temperature pressure vessels.

What Is the Difference Between Sheet & Plate Steel ...

Steel is an alloy of iron that has enhanced chemical and physical properties. The most commonly found steels are alloyed with between 0.2 percent and 2.15 percent of carbon, but some steels can be found that are alloyed with other materials like tungsten, chromium, vanadium and manganese.

ISO 9329-3 Grade X12Ni5 - Steel - Matmatch

See the chemical composition and physical properties of ISO 9329-3 Grade X12Ni5, find alternative materials, and connect with suppliers. ... (sheet) bar, sheet. AIR 9160 Grade 9160C231 solution treated and tempered bar. Suggested reading. Carbon Steel: Properties, Production, Examples and Applications Comparing Hardness Tests: Vickers, Rockwell ...

About Us | United Sheet & Plate Steels

About Us on United Sheet & Plate Steels | Chosen for service, preferred for quality USP Steels Ltd is a steel sheet and plate stockist based in the West Midlands. USP Steels was originally formed as a division of United Steels Group, The business was launched by …

Steel Sheet & Plate - Industrial Metal Supply

Industrial Metal Supply is your #1 source for steel sheet and plate. We can provide cold rolled steel sheet and cold rolled steel plate in the size and gauge you need, including custom cut-to-size pieces. Contact us for steel sheet, plate, and much more.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when …

The Four Types of Steel | Metal Supermarkets

High Carbon Steel: Commonly known as “carbon tool steel” it typically has a carbon range between 0.61% and 1.50%. High carbon steel is very difficult to cut, bend and weld. Once heat treated it becomes extremely hard and brittle. This article is the first of a four-part series on the different types of steel.[PDF]

PRODUCTION AND PROPERTIES OF HIGH-STRENGTH …

Fig. 3 gives an overview on the specified steel grades, their chemical composition and the required mechanical properties [3, 4]. High-strength steels with 5% or 9% Ni are preferably delivered according to DIN EN 10028-4 as X12Ni5 or X7Ni9 (X8Ni9) or according to ASTM/ASME-Standard as A553 Type I.

ASTM A36 Mild Steel Sheet - mielemetal

ASTM A36 Mild Steel Sheet,A36 Carbon Steel Plate. A36 Steel plate,A36 Steel Sheet. Steel sheet, Steel plate. STANDARD. GB/T 3522,GB/T 3524,GB/T 13237,GB/T 16270,GB712,GB713,

x7ni9 steel - pressure-vessel-steel

steels for pressure purposes-Nickel alloy X7Ni9 | Gloria Steel. The technical conditions apply to plates of X7Ni9 with thickness not more than 50mm. (8mm-50mm) Buy Carbon Steel Plate X12ni5 – steels. Nickel Steel Plates 9% ... The relevant coding consists of 100 x Carbon % content then Chemical ....

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.