Tel: +86-371-86151827

s355 grade steel plate thickness

Steel grade:s355 grade steel plate thickness

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s355 grade steel plate thickness Introduction

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

S355 Structural Steel & Steel Plate | Murray Steel Products

S355 steel plate and structural sections in stock at Murray Steel Products. Range of processing services available, including profiling, cutting and drilling. ... (*differs with section thickness and grade variation) Grades for Potential Substitution (Lesser) Structural Steel / Steel Plate. S275. VIEW. Structural Steel Plate. ST52-3. VIEW ...

Beverly Steel - S355JR Steel Plate

S355 – an useful structural grade steel with a minimum yield strength of 355 N/mm². S355 being widely used in the structural engineering and important source construction industries, S355 offers high yield and tensile strength and is supplied with a variety of treatments and test options to ensure that it is a highly usable steel in your ...

S355 Structural Steel Plate, S355JR Structural Steel Plate ...

Conquest Steel and Alloys is India Based Leading Supplier and Stockist of High Quality and Speciality Steel Such as S355 Structural Steel Plate, S355 Structural High Tensile Steel Plates Available in Ready Stock of IS 2062 E350 C Steel plates Exporter located in Mumbai, India.

Material selection and product specification ...

Material selection and product specification. From Steelconstruction.info. ... The design calculations resulted in a requirement for a 55m thick bottom flange in grade S355 steel. So, for T Ed = -12 °C, and with reference to Table 2.1 of EN ... A band width of 25x the web plate thickness either side of a single-sided bearing stiffener if ...

Structural Steel - EN10025 S275, S355JR and S355JO

S335JR - an useful structural grade steel with a minimum yield strength of 355 N/mm². S355 being widely used in the structural engineering and construction industries, S355 offers high yield and tensile strength and is supplied with a variety of treatments and test options to ensure that it is a highly usable steel in your various projects.[PDF]

S355 European Standard Steel - joostdevree.nl

S355 European Standard Steel S355 EN 10025 : 2004 Standard Structural Steel Plate S355 structural steel plate is a high-strength low-alloy European standard structural steel covering four of the six "Parts" within the EN 10025 – 2004 standard. With minimum yield of …

S355 S355J2 S355J2+N Steel - UK Supplier

S355, S355J2, S355JR, S355J2+N steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions.[PDF]

Structural Steel Plate and Strip to EN 10025

The grade designations of EN 10025 refer to the minimum yield strength of each grade for thicknesses less than or equal to 16mm. Above 16mm, the yield strength decreases as the thickness increments increase. The steel grade should be selected in accordance with the …

Q345 Steel Specification and Equivalent Standard

Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship, railway and vehicles, bridges, boiler, pressure vessel ...

s355 k2g3 steel plate suppliers | S355MC Plates Supplier ...

We offer high grade S355 K2G3 Steel Plate at affordable price. These S355 K2G3 Steel Plate are manufactured using finest grade raw material available to ensure international quality. These S355 K2G3 Steel Plate are available in different shape size and thickness

S355 J2+N Steel Plates Suppliers in India, Buy S355 High ...

steelplates.in› Steel PlatesS355 Grade Steel Plates offer high yield and tensile strength with a minimum yield strength of 355 N/mm². Metline is a specialist supplier of S355 J2+N structural steel plates in India. Sizes from 8mm to 100mm are regularly available in stock for immediate deliveries to customers across India and overseas.

S355 Structural Steel Plate | Leeco Steel, LLC

leecosteel› …› EN Standard Steel PlateS355 is a non-alloy European standard (EN 10025) structural steel that is high-strength most commonly used after S235. S355 steel covers four of the six categories within the EN 10025: 2004 standard. With minimum yield of 50 ksi, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709.. Careful attention should always be placed on the specific variation of S355 ...

S355 Structural Steel Plate, S355JR Structural Steel Plate ...

Conquest Steel and Alloys is India Based Leading Supplier and Stockist of High Quality and Speciality Steel Such as S355 Structural Steel Plate, S355 Structural High Tensile Steel Plates Available in Ready Stock of IS 2062 E350 C Steel plates Exporter located in Mumbai, India.

BS EN10025 structural steel plate - S235, S275 and S355 ...

BS EN10025 structural steel plate and equivalent ASTM. HOME > blog. ... 235 – related to the minimum yield strength of the steel (tested at a thickness of 16mm) ... P275NL1 steel plate and equivalent grade. 23 May, 2017. SS400 steel plate. Contact us. Phone: (86)372 5368538.

s355 k2g3 steel plate suppliers | S355MC Plates Supplier ...

We offer high grade S355 K2G3 Steel Plate at affordable price. These S355 K2G3 Steel Plate are manufactured using finest grade raw material available to ensure international quality. These S355 K2G3 Steel Plate are available in different shape size and thickness

S355 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S355 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Offshore Structural Steel Plate | Steel Grade S355

Steel Plate for Offshore structures is Available up to thicknesses of 200mm.The range includes grades and specifications: EN 10025 S355 J2+N, EN 10025 S355 K2+N, C/W -40 Degrees IMPACT TEST, EN10204 3.2 Lloyds.

BSi Steel Ltd - Plate S355

BSi Steel Ltd. Product Guide Flat Products. BSi Steel, offers technical back-up services to their ... valued customers. Our partners are able to draw on our expertise in steel. BSi Steel (Pty) Ltd Flat Products (Plate S355) Plate S355 is available in a huge number of sizes & thicknesses to suit your requirements ... Our Lloyds Plate is grade "A ...

Q345 Steel Specification and Equivalent Standard

Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship, railway and vehicles, bridges, boiler, pressure vessel ...

Structural Steel - S235, S275, S355 Chemical Composition ...

There are many examples of European grades of structural steel such as; S195, S235, S275, S355, S420, S460 etc. However, for the purposes of this article we will focus on the Chemical Composition, Mechanical Properties and Applications of S235, S275, S355. Three common structural steel grades used in all manner of Construction projects across ...

Metals :: Mild Steel (S275, S355 & S460) :: Sheet & Plate

Thickness. 1.0mm; 10mm; 12mm; 15mm; 20mm; 25mm (1") 2mm; 30mm; 32mm; 3mm; ... Material. Mild steel checker durbar; S275 Mild Steel Cold rolled; S275JR Mild Steel; S355 Mild Steel; S460 Steel; No items found matching the search criteria. Price. £10; £10.1 – £ Product type. Mild steel sheet & plate; Mild steel tread plate checker; S460 Steel ...

S355 Structural Steel Plate | Leeco Steel, LLC

leecosteel› …› EN Standard Steel PlateS355 is a non-alloy European standard (EN 10025) structural steel that is high-strength most commonly used after S235. S355 steel covers four of the six categories within the EN 10025: 2004 standard. With minimum yield of 50 ksi, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709.. Careful attention should always be placed on the specific variation of S355 ...

Steel Plate Grades - Continental Steel & Tube Company

Commercial and Specification Grade Steel Plates are stocked to meet a variety of end use requirements that range from the most unsophisticated storage bin to such highly critical applications as Cryogenic Pressure Vessels.. LOW CARBON PLATE STEEL. Low Carbon Plate Steel is manufactured to three separate carbon ranges that relate to thickness and end use requirements.

Steel material properties - Steelconstruction.info

Steel material properties. From Steelconstruction.info. Jump to: ... the primary designation relates to the yield strength, e.g. S355 steel is a structural steel with a specified minimum yield strength of 355 N/mm². ... stress level etc, to a 'limiting thickness' for each sub-grade of steel. PD 6695-1-10 ...[PDF]

Plate Specification Guide 2015-2016 - …

Thickness Carbon/HSLA – 3/16" to 30" Alloy – 1/8" to 15" ... 2015-2016 Plate Steel Specification Guide – Page 6 ASTM Specifications continued SPECIFICATION A299 Grade A A299 Grade B A302 Grade A A302 Grade B A302 Grade C A302 Grade D Type of Steel Carbon Carbon Alloy Alloy Alloy Alloy Requirements for Delivery A20 A20 A20 A20 A20 A20 ...[PDF]

S355 S355J2 S355J2+N Steel - West Yorkshire Steel

West Yorkshire Steel are S355 stockholders and suppliers of flame cut plate, round bar and flat bar. This steel grade can be supplied to your required sizes as one offs or multiple cut pieces. Flame cut plates can also be Lumsden ground to size on thickness. Contact our experienced sales team who will assist you with your S355 carbon steel ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.