Tel: +86-371-86151827

q345b steel plate weight chemical composition

Steel grade:q345b steel plate weight chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

q345b steel plate weight chemical composition Introduction

q345b steel plate weight chemical composition

q345b steel plate weight chemical composition steel plate is structural steels, used for welding, bolting, and more riveted structure. Toggle navigation 0086-18317160019 [email protected]

Properties of Q345B Steel for Plate Material | Sciencing

Density, Thickness and Mass. The density of Q345B steel is approximately 7.8 (where water is 1.0), and it is commonly available in thicknesses ranging from 2 mm to 12.7 mm (12.7 mm is approximately half-inch thick plates), with sheets typically sold in 1 to 1.35 meter wide splits. By way of comparison, a 2 mm thick sheet...

q345b steel chemical composition weight

q345b steel chemical composition weight steel plate is structural steels, used for welding, bolting, and more riveted structure. Toggle navigation 0086-18317160019 [email protected]

q345b steel specification pdf chemical composition ...

q345b steel specification pdf chemical composition specification can be offered by KATALOR ,we are professional q345b steel specification pdf chemical composition suppliers and manufacturer in China, if you need q345b steel specification pdf chemical composition price and application ,please contact us.

Q345B,Q345B PLATE,Q345B STEEL

Steel grade Q345B is the most common used as high strength low alloy structural steel in industry area.Xinsteel can offer steel coils,steel plates,angles,channels for Q345B materials.The equivalent steel grade with Q345B are EN 10025-2 S355JR,ASTM A572/A572 A572 Grade 50 and DIN 17100 St52-3.

q345b steel chemical composition physical properties ...

q345b steel chemical composition physical properties specification can be offered by KATALOR ,we are professional q345b steel chemical composition physical properties suppliers and manufacturer in China, if you need q345b steel chemical composition …

Q345 Steel, Q345A Q345B Q345C Q345D Q345E Equivalent ...

Q345 Steel Properties and Introduction. Q345 steel is a Chinese steel grade of Low Alloy High Strength Structural Steel, material density is 7.85 g/cm3, tensile strength is 470-630 Mpa, and yield strength is 345 MPa (datasheet tested with 16mm diameter steel bars or steel plates). According to GB/T 1591 – 2008, Q345 material has 5 quality grades: Q345A, Q345B, Q345C, Q345D and Q345E.

steel slab (ss-400)standard weight and chemical composition is

steel plate,steel pipe,steel coil - kouhpayesteelJIS G3101 SS 400 steel plate,JIS G3101 SS 400 steel … · Web viewGrade Chemical Composition, % by weight C. max Si. max Manganese P. max S. max SS400 - - - 0.050 0.050 JIS G3101 SS 400 steel mechanical property: JIS G3101 SS400 is a technical delivery conditions for general purpose structural steel.JIS G3101 SS400 is a type of steel …

Q345 Steel Specification and Equivalent Standard

Q345 steel specification and equivalent standard. Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it …

Q345B (GB ) - Worldwide equivalent grades - Steel Number

Post free buying requirement for product Q345B (GB ) Chemical composition and properties of european equivalents (EN) for Q345B (China, GB ): S355JR (1.0045) , Q345B (China, GB ) - European (EU, EN) and wordwide Steel equivalent grades. These comparison table is only intended as an indication of the closest khown equivalent grades.

Q345 steel property and specification are equivalent to ...

Q345 steel property and specification. The Q345 is a steel with less than 0.2 percent of its composition made up of carbon, less than 0.55 percent of its composition made of silicon and several impurities. This particular grade of steel is a general purpose manufacturing steel in construction equipment field.

GB/T1591 Q345B Carbon and Low-alloy High-strength Steel Plate

Any request for GB/T1591 Q345B Carbon and Low-alloy High-strength Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

q345b steel mechanical properties chemical composition

q345b steel mechanical properties chemical composition steel plate is structural steels, used for welding, bolting, and more riveted structure. Toggle navigation 0086-18317160019 [email protected]

GB-T1591 Q345B Carbon steel plate__Steel Supplier

If you have any requirement in steel plate for Q345B, whether the new plate or stock list of material, please feel free to contact us by email of calling. Tags: Q345B,GB-T1591 Q345B, Q345B Steel Plate, Q345B steel factory, Q345B adopt standard, Q345B Heat treatment, Q345B Technical delivery condition, Q345B Chemical, Q345B Mechanical property ...

Forging material 16mn chemical composition - A36 steel ...

Good Mechanical Properties Low Alloy High Strength 16Mn Steel Plate . alloy steel carbon steel. 16MnCr5 STEEL PLATE Chemical composition H13 Material Steel . Multifunctional 16Mn BK H8 high precision . Multifunctional 16mn Bk H8 High Precision Seamless Steel Tube Made In China , Material. 20#,45#,16Mn,CK45 Chemical Composition.

GB/T 1591 Q345A/Q345B/Q345C/Q345D/Q345E STEEL PLATE …

1) Application Potential: The steel plate of Q345 is applied to manufacture factory building, civil building and all kinds of engineering machinery in mine industry and various of civil construction, such as drilling rig, electric shovel, powered wheel tipper, mining vehicles, excavators, loaders, bulldozers, industrial blowers, various types of ...

supplier of a572 chemical composition,A36,Q235B,Q345B ...

s460 chemical composition,ASTM A572-50,Q345 steel … s420 grade steel chemical composition steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. s420 grade steel chemical composition can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel.

GB/T1591 Q345B Q345C Q345D Q345E steel plate supplier ...

GB/T1591 Q345 steel include Q345A, Q345B, Q345C, Q345D, Q345E steel. GB/T1591 Q345 steel plate external implementation of the standard is: gb709, the internal implementation of the standard is: gb/t1591-94, due to the reasons for the implementation of …

Buy Steel Plate Q345b - natural-elements-online

4x8 steel sheet q345b steel plate 40mm thick-- Katalor. Katalor is a professional 4x8 steel sheet q345b steel plate 40mm thick supplier in China. Buy Q345b l Low Alloy Steel Plate China Manufacturer. Buy Q345b l Low Alloy Steel Plate China Manufacturer steel plate is structural steels, used for welding, bolting, and more riveted structure.

supplier of A 36 CHEMICAL COMPOSITION,A36,Q235B,Q345B ...

astm a36 steel chemical composition - pond-pro. astm a36 chemical composition - natural-elements-online ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min

supplier of chemical composition of ss 348,A36,Q235B,Q345B ...

Stainless Steel – Grade 348 (UNS S34800)Grade 348 stainless steel is similar to that of 321 stainless steel. It uses stabilizing elements such as columbium or tantalum to increase intergranular corrosion resistance. The following datasheet gives an overview of grade 348 stainless steel. Chemical Composition

Q345D,Q345D PLATE,Q345D STEEL - Mild steel plate ...

ADD: No.88 Beihuan Road,Jinshui District,Zhengzhou City Henan Province in China. ■ Overview. GB/T1591 Q345D steel shall be done charpy V-notch impacting test under minus 20 centigrade.Many container manufacturers adpots these high tension strength to make offshore containers which can be used in deep oceans.

A36 chemical composition - steelsheetplate

A36 chemical composition steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. A36 chemical composition can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel. Boiling steel is incompletely deoxidized steel with poor plasticity and toughness.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.