Tel: +86-371-86151827

dx53 steel plate steel coil sheet steels

Steel grade:dx53 steel plate steel coil sheet steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

dx53 steel plate steel coil sheet steels Introduction

What Is the Difference Between Sheet & Plate Steel ...

Steel is an alloy of iron that has enhanced chemical and physical properties. The most commonly found steels are alloyed with between 0.2 percent and 2.15 percent of carbon, but some steels can be found that are alloyed with other materials like tungsten, chromium, vanadium and manganese.

Metal coated steels - SSAB high-strength steel - sheet ...

SSAB Boron . SSAB Boron wider range of steel grades for quench hardening and press hardening. SSAB Boron steel is optimized for products that require complex forming in combination with high wear resistance and strength.

Products | Coil Steels

Coil Steels is committed to providing a safe and healthy work environment. “Coil Steels” is the trading name of Coil Steels Pty Ltd ABN 63 605 323 573 TRUSPEC®, COLORBOND®, TRUECORE®, ZINCALUME®, GALVABOND®, Hot Rolled, Zincanneal, Brightform, AQUAPLATE®, GALVASPAN® and Zinc Hi-Ten are registered trade marks of BlueScope Steel Limited.[PDF]

Steel Plate & Sheet - alro

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

dx53 cold rolled 316 stainless steel coil

dx53 cold rolled 316 stainless steel coil. Stainless Steel Plate - 304 & 316 - Hot Rolled, Cold Drawn | O;Neal . O;Neal Steel carries plate in 304/304L and 316/316L stainless steel alloys. Hot rolled plate has a dull gray, mill finish and cold rolled has a smooth, brighter finish. ... Stainless Steel Sheet, Coil and Plate - Atlas Steels Australia.[PDF]

Stainless Steel Sheet, Coil and Plate - Atlas Steels Australia

Section 2 – Flat Product – Stainless Steel Sheet, Coil, Strip & Plate Stainless Steel Sheet, Coil, Strip & Plate October 2016 Page 3 – Section 2 atlassteels.au Speci cations ASTM A240M. Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and for general applications. ASTM 480M.

Prepainted Steel Coil/Sheet - steels-supplier

Special Coating function For Prepainted Steel Coil/Sheet: The width range of the supplied steel plate for ANSON steel is 700-1550mm; The thickness range of the design is 0.2-2.0 mm, which can provide the steel volume of 508 or 610mm inner diameter.

Steel Sheet & Plate - Industrial Metal Supply

Industrial Metal Supply is your #1 source for steel sheet and plate. We can provide cold rolled steel sheet and cold rolled steel plate in the size and gauge you need, including custom cut-to-size pieces. Contact us for steel sheet, plate, and much more.

Metal coated steels - SSAB high-strength steel - sheet ...

SSAB Boron . SSAB Boron wider range of steel grades for quench hardening and press hardening. SSAB Boron steel is optimized for products that require complex forming in combination with high wear resistance and strength.

dx53 coated steel coils - hopkinsplasticsurgery

Dx53 Gi Coils, Dx53 Gi Coils Suppliers and Manufacturers ...galvanized steel coil dx53 color hdg steel sheet color coated coil ppgi gi cold dx51 ppgi dx51 d gi coil sgcc crc sheet coils en 10130 dc01 dx 51 dx51 z galvanized steel sheet galvanized steel coils gi hot rolled steel coil plate hot rolled coil machin rolled steel carbon coil galvanized t&t steel steele smooth futures coil suppliers ...[PDF]

Steel Plate & Sheet - alro

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29[PDF]

Stainless Steel Sheet, Coil and Plate - Atlas Steels …

Section 2 – Flat Product – Stainless Steel Sheet, Coil, Strip & Plate Stainless Steel Sheet, Coil, Strip & Plate October 2016 Page 3 – Section 2 atlassteels.au Speci cations ASTM A240M. Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and for general applications. ASTM 480M.[PDF]

Stainless Steel Sheet, Coil and Plate - Plucka

ASTM A240M.Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and for general applications. ASTM 480M.General requirements for flat rolled stainless and heat-resisting steel plate, sheet and strip. Production Stainless steel coil and plate consumed by the Australian and New Zealand market is

Prepainted Steel Coil/Sheet - steels-supplier

Special Coating function For Prepainted Steel Coil/Sheet: The width range of the supplied steel plate for ANSON steel is 700-1550mm; The thickness range of the design is 0.2-2.0 mm, which can provide the steel volume of 508 or 610mm inner diameter.

Dx53 Galvanized Steel Coils, Dx53 Galvanized Steel Coils ...

Alibaba offers 111 dx53 galvanized steel coils products. About 78% of these are steel sheets, 1% are stainless steel sheets. A wide variety of dx53 galvanized steel coils options are available to you, such as aisi, astm, and din.

SSAB high-strength steel - sheet, plate, coil, tube ...

SSAB is a Nordic and US-based steel company. SSAB offers value added products and services developed in close cooperation with its customers to create a stronger, lighter and more sustainable world. SSAB high-strength steel - sheet, plate, coil, tube, profile - SSAB

We Supply Stainless Steel Sheet, Coil & Plate Materials

Stainless steels are a family of iron based alloys that contain a minimum of 10.5% chromium (CR). The presence of chromium creates an invisible surface film that resists oxidation and makes the material passive or corrosion resistant (stainless). There are multiple families of stainless steel which are designed for various applications and uses.

Weathering steel products, coil, sheet, plate, flats ...

Central Steel Service Inc provides Corten Steel Equivalent, High Strength, High Strength Weathering and Abrasion Resistant Steel across the following categories. HIGH STRENGTH WEATHERING STEEL PLATE, SHEET, COIL

coil dx53 cold rolled g90 sheet metal sheets - w3s.in

coil dx53 cold rolled g90 sheet metal sheets - aipmt2.incoil dx53 cold rolled g90 sheet metal sheets Majestic Steel - Products Cold Rolled steel gains its strength from the cold rolling process in which the steel is formed into sheets at room temperature.

Material S420MC DX53 for North Thiladhunmathi

DX51,DX52,DX53 Hot dipped Galvanized steel plate sheet ... We have steel mill for manufacturing DX51,DX52,DX53 Hot dipped Galvanized steel plate sheet.we started the ... The material comes with ... S420MC structure steel ... EN 10027 - Designation systems for steels. Steel numbers. Steel Numbers Steel Classification according to EN 10027-2.[PDF]

Hot-Rolled Steel Sheets and Coils

Hot-Rolled Steel Sheets and Coils meeting a variety of standards ranging from mild steels to high-tensile strength steels are available. Variable sizes of cut sheets, coils, and various surface fi nishes such as black fi nish, pickled ... Contact Nippon Steel & Sumitomo Metal about the varieties of steel plates (cut sheets) available. JIS G ...

304l Sheet Ba Finished 304l Stainless Steel Plate

Stainless Steel Sheet, Coil and Plate - Atlas Steels Australia. ... We are the stockholders of stainless steel sheets, plates, coils, tubes, pipes, 304, 304L, 316L, 309, 310S, 430 from 0.30mm to 50.00mm in finishes 2B, BA, No. ... dx53 cold rolled 316 stainless steel coil; Hot Products.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.