Tel: +86-371-86151827

power plant corrosion of 304 stainless steel plate

Steel grade:power plant corrosion of 304 stainless steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

power plant corrosion of 304 stainless steel plate Introduction

[PDF]

305 STAINLESS STEEL - aksteel

Type 305 is an austenitic chromium-nickel stainless steel that can be spun and deep drawn more easily due to an increased nickel content that decreases work hardening. It is nonmagnetic and cannot be hardened by heat treatment. Typical uses include appliances, kitchen utensils, tank covers and other deep drawn parts. DATA SHEET. 305 STAINLESS STEEL.[PDF]

STAINLESS STEEL - AK Steel Holding

304/304L STAINLESS STEEL. 1. Type 304 Stainless Steel is a variation of the base 18-8 grade, with a higher chromium and lower carbon content. The lower carbon content minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion.

Crazy! There Are 304 Stainless Steel Plate and Stainless ...

304 Stainless Steel Plate 304 Stainless Steel Coil, the most widely used of the stainless and heat resisting steels.Choose our Stainless Steel Clad Plate, you can be …[PDF]

Stainless Steel Plates & Sheets - NSSC 新日鐵住金 ...

Stainless Steel Plates & Sheets Application Examples Chemical tanker(NSSC2120, 316L, 316LN, S31803, e.t.c.) LNG satellite(304) Petrochemical plant(304, 316L, S31803, e.t.c.) Shroud head of light-water reactor for nuclear power plant(316L) Display Manufacturing Equipment(304)

Effect of Flow Rates on Localized Corrosion Behavior of ...

Abstract The effect of flow rates on the corrosion behavior of 304 stainless steel in a solution of 0.5 N NaCl containing 0, 0.02, and 1.2 mg/L dissolved ozone was studied at room temperature. Flow rates ranging from 0.3 to 2.0 m/s were simulated by the use of a rotating cylinder electrode (RCE). Corrosion potentials and passive current densities were measured, and values of breakdown and ...[PDF]

Introduction to Stainless Steels - asminternational.org

tric power plants. The relative importance of ... loys, which are based on type 304 (18-8) stainless steel, as shown in Fig. 1, generally contain 16 to 26% Cr, 10 to 22% Ni, and ... proved corrosion resistance. Ferritic stainless steels are nonhardenable iron-chromium alloys. They include the following:

302 Series 2-Gang 2.15 in. hole Power Outlet Wall Plate in ...

hole Power Outlet Wall Plate in Stainless Steel. $1042 /each. Our wall plates are constructed of an alloy containing 18% chromium and 8% nickel for superior resistance to corrosion. Due to the durable and resistant metal alloy, these wall plates are ideal for use in commercial applications where corrosive atmospheres exist.Price: 10.42[PDF]

CHAPTER 14 Nuclear Plant Materials and Corrosion

CHAPTER 14 Nuclear Plant Materials and Corrosion prepared by ... Figure 12. Typical sensitization mode and IGA of Type 304 stainless steel (after Fontana 1986) 44 Figure 13. Initial (A) and final (B) stages in the development of crevice corrosion of a metal M ... Nuclear Plant Materials and Corrosion – September 2014. 14 ...[PDF]

Stainless Steel in Biogas Production

The digester tanks are made of stainless steel grade En 1.4301/ AISI 304. One of the first biogas plants in China, the Wuxi kaipu CnG System was commissioned in 2010. The plant processes 15,000 Mt of pig manure, 1,500 Mt of rice straw and 20,000 Mt of organic waste water.

Materials Selection - Power Engineering

Materials Selection. For instance, although 304 stainless steel is usually suitable for fresh water applications, it is most inappropriate for seawater because chlorides in the water will cause pitting. As mentioned, copper-based tubes are not suitable for use in waters containing sulfides.[PDF]

Microbiologically Influenced Corrosion of Stainless …

Microbiologically Influenced Corrosion of Stainless Steels by Water Used for Cooling and Hydrostatic Testing ... SST and plain carbon steel tanks and a 2-1/2 mile 304 SST pipeline were constructed near the port of Bandar Shapur, Iran(". ... Replacement of a steam generator at a nuclear power plant resulted in many systems out of service and/or in a[PDF]

STAINLESS STEEL - AK Steel Holding

304/304L STAINLESS STEEL 1 Type 304 Stainless Steel is a variation of the base 18-8 grade, with a higher chromium and lower carbon content. The lower carbon content minimizes chromium carbide precipitation due to welding and its susceptibility to intergranular corrosion. In some instances Type 304 can be used in the "as-welded" condition.

Home - Advanced Global Materials, Alloys, Stainless Steel ...

Advanced Global specializes in a wide variety of metals to accommodate this industry. Supplying high strength alloys, corrosion resistant nickels, stainless steel grades, high pressure quality materials . available in plate, sheet, bar, pipe, tube

Corrosion types of stainless steel - Yaang

The stress corrosion of stainless steel is the most serious corrosive form in the failure of stainless steel. If there is a slight crack in the process of corrosion, the expansion rate is several orders of magnitude faster than other types of corrosion, causing catastrophic consequences. Chemical plants, nuclear power plants, boilers and other ...[PDF]

Corrosion-resistant steel plates - Nippon Steel & …

Corrosion-resistant Steel Plates Corrosion-resistant Steel Plates are used as special steel stock for corrosion protection. They are steel materials with corrosion resistance improved by adding anti-corrosion elements (Cr, Cu, Ni, etc.) in an amount that most suits the environment in which the steel …[PDF]

Stainless Steel in Biogas Production

Stainless steel biogas tanks are assembled from top to bottom and lifted into place using a simple system. Stainless steel reduces construction time and logistic costs. It has excellent corrosion resistance against H 2 S or ammonia and this makes maintenance easier. worldstainless.org 5 STAInLESS STEEL In A BIOGAS PLAnT[PDF]

Stainless Steel in Solar Energy Use

Direct thermosiphon systems can be used in parts of the world grade 304 stainless steel (Photo: sansung.tw) where there is no risk of frost. Thermosiphon systems consist of tanks with an inner and an outer shell (Figure 2). Stainless steel is an excellent candidate material for both.

Failure analysis of type 304 stainless steel amine ...

The plates were made from ASTM 304 stainless steel, while other parts of exchanger were made from ASTM A516 carbon steel. One side of the sheet plates were in contact with lean amine solution while the other sides were in contact with semi-lean amine solution. Fig. 2. shows a schematic of a plate type amine exchanger unit.

Alloy 904L Stainless Steel Plate - Sandmeyer Steel

Corrosion Resistance. Conventional stainless steels such as 304L and 316L are susceptible to chloride stress corrosion cracking (SSC) under certain conditions. Resistance to SSC increases with the increased content of nickel and molybdenum. Therefore, the higher performance austenitic stainless steels such as 904L have very good resistance to SSC.[PDF]

Special Austenitic - India’s largest stainless steel ...

India's largest fully integrated stainless steel manufacturer. It has grown from an indigenous single-unit stainless steel plant in Hisar, Haryana, to the present multi-location and multi-product conglomerate. CORPORATE Jindal Stainless is a globally recognized producer of stainless steel flat products in Austenitic, Ferritic, Martensitic and ...[PDF]

STAINLESS STEEL - AK Steel Holding

AK Steel is a leading producer of flat-rolled carbon, stainless and electrical steel products, and carbon and stainless tubular products, primarily for automotive, infrastructure and manufacturing, construction and electrical power generation and distribution markets. Headquartered in …

Austenitic Stainless Steel - an overview | ScienceDirect ...

S. Prakash, in Structural Alloys for Power Plants, 201410.3.4 Development of austenitic steel. Austenitic stainless steels are among the most widely used types of stainless steel. The most commonly used grades are the American Iron and Steel Institute (AISI) 300 series of alloys.

Alloy 303 Austenitic Stainless Steel Plate - Sandmeyer Steel

Alloy 303 (UNS S30300) is a non-magnetic, austenitic, free-machining stainless steel that is a modification of the basic 10% chromium -8% nickel stainless steel specially designed to exhibit improved machinability while maintaining good mechanical and corrosion-resistant properties.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.