Tel: +86-371-86151827

quality assurance aisi t1 high speed steel sheet

Steel grade:quality assurance aisi t1 high speed steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

quality assurance aisi t1 high speed steel sheet Introduction

T1 Tool Steel AISI | 1.3355 | HS18-0-1 | SKH2 HSS - Otai ...

What is T1 High Speed tool steel? AISI/ASTM T1 tool steel is one of the original tungsten high speed steels, although all tungsten steel grades are used to a limited extent because of the cost and questionable availability of tungsten. Of the T group steels, the general purpose T1 tool steels and the high-vanadium-cobalt T15 are most commonly used.

AISI T1 | 1.3355 | SKH2 - Xingsheng Special steel

AISI T1 high speed tool steel manufacturers and suppliers, supplied in round bar,square bar,flat bar,plate,sheet and wire.AISI T1 is the most widely used tungsten type of high speed steel according to ASTM/A600 standard.As original HSS,T1 has good abrasion resistance, high toughness, high hardness (62~66HRC) ,good red hardness,and easy to grinding.

T1 Tool Steel | SKH2 | 2750 | W18Cr4V | HS 18-0-1 | 1.3355 ...

T1 Tool Steel | SKH2 | 2750 | W18Cr4V | HS 18-0-1 | 1.3355 High Speed Steel. AISI T1 Tool Steel is typical W High Speed Steel. HSS T1 is the most widely used tungsten type of high speed steel, high temperature hardness and red hardness is high, easy to grinding.

AISI T1 Steel | 1.3355 | HS 18-0-1 | SKH2 High Speed Steel ...

AISI T1 Applications. As a high quality HSS tool steel AISI T1 is very suitable for make complex blanking, high speed Drill bar, vibration and impact load of the mold: deep drawing die, punching die. Metal cutting saw blades, cold heading and extrusion tools. It have very good hot hardness.

AISI M35 Tool Steel - High Speed Steel | Steel Bar

M35 High Speed Steel. AISI M35 Tool Steel is a Cobalt-Type high speed tool steel.M35 steel is on the basis of M2 Steel, but with 5% Cobalt content increased which makes better hot hardness and wear resistance. AISI M35 Steel is suitable for heat treatment up …

T1 High Speed Steel - fuhongforge

T1 High Speed Steel T1 high speed tool steel manufacturers and suppliers, supplied in round rods,flat/square bars,plates,sheets,wire and blocks. T1 steel is a typical Tungsten-type high speed tool steel according to ASTM standard.It has good comprehensive performance. T1 hss steel has a high hardness (HRC62~66), strength, toughness and heat resistance.The red hardness of T1 tool steel …

hss aisi t1 sheet - w3s.in

AISI T1 high speed tool steel manufacturers and suppliers, supplied in round bar,square bar,flat bar,plate,sheet and wire.AISI T1 is the most widely used tungsten type of high speed steel according to ASTM/A600 standard.As original HSS,T1 has good abrasion resistance, high toughness, high hardness (62~66HRC) ,good red hardness,and easy to grinding.

T1 Flat Bar Alloy High Speed Steel Specification

AISI 4140 Steel Bar | 1.7225 | 42CrMo4 | SCM440. AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist and Exporter. AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like …

T2 High Speed Steel, ASTM A600 (UNS T12002)

ASTM/AISI T2 high speed steel is a Tungsten High Speed Steel grade Tool Steel in specification of ASTM A600. ASTM A600 standard covers tungsten-type and molybdenum-type high-speed steels used primarily in the fabrication of tools. There are seven types of tungsten high-speed tool steels designated T1, T2, T4, T5, T6, T8 and T15 etc.

USA ASTM T1 steel - steel-grades

This page cover the Mechanical Properties, Chemical Element, Cross Reference of USA ASTM T1 steel grade, Application Tungsten series High-Speed Tool Steel ,

Tool Steel T1 | All Metals & Forge Group

Tool Steel T1 Principal Design Features. This alloy is a High Speed, tungsten type tool steel. To Send a Request for Quote, please Click Here, call 973.276.5000, or fax (973) 276 – 5050

High Speed Steel | Steel Bar

High Performance High Speed Tool Steel Supplied in Round / Square / Flat Bars, Plates, Sheets. Featured HSS Steel Grades: M2, M35, M42, T1, T4, 1.3343, SKH9 / SKH51.

M2 high speed tool steel manufacturer-Fuhong

M2 High Speed Tool Steel. M2 high speed tool steel manufacturers and suppliers, supplied in round bar,square bar,flat bar,plate,sheet and wire. M2 is molybdenum based high-speed steel in tungsten–molybdenum series which has a well balanced composition.M2 is by far the most popular high speed steel replacing T1 in most applications because of its excellent properties and relative …

T1 High Speed Steel - fuhongforge

T1 High Speed Steel T1 high speed tool steel manufacturers and suppliers, supplied in round rods,flat/square bars,plates,sheets,wire and blocks. T1 steel is a typical Tungsten-type high speed tool steel according to ASTM standard.It has good comprehensive performance.

High Speed Steel | Steel Bar

High Performance High Speed Tool Steel Supplied in Round / Square / Flat Bars, Plates, Sheets. Featured HSS Steel Grades: M2, M35, M42, T1, T4, 1.3343, SKH9 / SKH51.

AISI M35 Tool Steel - High Speed Steel | Steel Bar

M35 High Speed Steel. AISI M35 Tool Steel is a Cobalt-Type high speed tool steel.M35 steel is on the basis of M2 Steel, but with 5% Cobalt content increased which makes better hot hardness and wear resistance. AISI M35 Steel is suitable for heat treatment up …

tool steel t1 w18cr4v - pond-pro

Product Description AISI T1 DIN 1.3355 Hot rolled tool steel plate W18Cr4V high speed steel sheet plate in alibaba. T1 high speed steel is a kind of high speed steel of tungsten with the exclusive nature of hardness, red-hardness and hot hardness. TOOL & DIE STEEL (MOULD STEEL SLAB) - …

HIGH SPEED STEEL - Xingsheng Special steel

HIGH SPEED STEEL admin 2018-11-23T11:32:35+00:00 ... AISI T1 | 1.3355 | SKH2. High Speed Steel. admin 2018-11-06T12:42:15+00:00 ... AISI M2 | 1.3343 | SKH51. High Speed Steel. Featured Product. Engineering Steel; High Speed STeel; Tool Steel; ISO 9001 Quality Assurance. Follow us. Contact Us: +86 158 52726305: +86 510 8330 2896: [email protected] ...

Hot sell hot rolled steel plate W18Cr4V - rdblegend.co.in

Hot Sell Aisi 420 Die Steel Hot Rolled Steel Sheet Mould ... MS PLATE from Search High Quality MS PLATE Manufacturing and Trade Assurance 2014 Hot Selling 20mm Thick Steel Plate Price & Chemical For Hot Rolled Ship Building A204GRB/A515/SA537CL 1 HOT ROLLED CARBON STEEL PLATE&SHEET&COIL ... AISI T1 DIN 1 3355 Hot rolled tool steel plate W18Cr4V ...

USA ASTM T1 steel - steel-grades

This page cover the Mechanical Properties, Chemical Element, Cross Reference of USA ASTM T1 steel grade, Application Tungsten series High-Speed Tool Steel ,

steel price of China supplier aisi 1060 t1 steel plate hot ...

Brass Sheet, Brass Plate, Cuzn30 Brass Sheet manufacturer / supplier in China, offering High Quality 1mm Cuzn30 Cuzn32 Cuzn35 Brass Sheet / Brass Plate Price List, Pure Aluminum Sheet and Plate 1060, AISI 201, SS304, Ss 316 Cold Rolled Stainless Steel Coils and so on. ... AISI T1/DIN 1.3355 Forged High Speed Steel Bar Hot dip aluminum-zinc ...

HSS Steels at Best Price in India - dir.indiamart

AISI M35 Tool Steel is a Cobalt-Type high speed tool steel. M35 steel is on the basis of M2 Steel, but with 5% Cobalt content increased which makes better hot hardness and wear resistance. ... The High Speed Steel T1 Flats Offered B Y Steel Mart Is 100% Ok – Tested Steel Mart Is Renowned For The Supply Of Genuine High. ... We are instrumental ...

SAE T1 steel | 1.3355 | HS 18-0-1 | SKH2 | 2750 High Speed ...

T1 Steel is a tungsten high speed tool steel. It is used to high strength,hardness, high temperature tools products. Free sample. ... As a high quality HSS tool steel ASTM AISI – SAE T1 is very suitable for make complex blanking, high speed Drill bar, vibration and impact load of the mold: deep drawing die, punching die. Metal cutting saw ...

hss 4341 steel sheet, View hss 4341 steel sheet, SMC ...

Application of High Speed Steel Strip/Tape/Sheet: High Speed Steel can be used in various applications, it features for resistant of high speed hardability, and it's ideal material for cutting blade. For carpenter's steel blade, high speed steel strip plays an important role. 1. Gear Cutter 2. Hacksaw blade 3. Saw blades 4. Slitting saw 5 ...

Tool Steels Forgings - Forged High Carbon Steel | All ...

There are a multitude of tool steel groups, such as air hardening, oil hardening, water hardening, and shock resisting, as well as cold working, hot working, high speed, mold steels and special purpose tool steel. Please see our complete list of alloys for more information. Manufactured Components using …

High Speed Steel Price - made-in-china

High Speed Steel Price - Select 2019 high quality High Speed Steel Price products in best price from certified Chinese High Strength Steel manufacturers, High Quality Steel Plate suppliers, wholesalers and factory on Made-in-China

aisi 430 stainless steel sheet 2b finished

China Stainless Steel Sheet manufacturers - Select 2019 high quality Stainless Steel Sheet products in best price from certified Chinese Stainless Steel Material manufacturers, Steel Pipe suppliers, wholesalers and factory on Made-in-China ... aisi 430 stainless steel sheet 2b finished: ... T1 Flat Bar Alloy High Speed Steel Specification ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.