Tel: +86-371-86151827

astm a285 grade a steel plate size

Steel grade:astm a285 grade a steel plate size

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a285 grade a steel plate size Introduction

ASTM A285 - SSAB high-strength steel - sheet, plate, coil ...

astm a285 The ASTM A285 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength intended for fusion-welded pressure vessels. Three grades having different strength levels are available in thicknesses up to 2", inclusively.

ASTM A 285/A283 Grade C Sheets and Plates, A285 Gr.C ...

A285 / A283 Grade C Sheets and Plates ASTM A 285 / A283 Grade C Sheets and Plates, ASME A 285 / A283 Grade C Sheets and Plates Pressure Vessel Steel Plate Exporters, Suppliers and Stockists in …Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical

ASTM A285 and ASTM A283 steel plate comparsion - AGICO

ASTM A285 Steel Introduction: With 3 steel grades (Grade A, Grade B, Grade C) covering tensile strength range from 310-515Mpa,usually ASTM A285 steel plate is delivered as-rolled condition. made by killed, semi-killed, capped or rimmed steel practices according to the end users’ requirement. ASTM A285 steel could be manufactured into many steel...

ASTM A285 Steel Plate-EPC Steel and Processing Co., Ltd.

epcsteel› Steel Plate› Pressure Vessel Steel Plateⅱ. Size of ASTM A285 Steel Plate. The maximum thickness of astm a285 steel plates is limited to a maximum thickness of 2 in. [50 mm] for all grades. And the length and width need to be made according to both customer’s needs and the manufacturers’ production capability.

ASTM A285 Grade C Carbon Steel Pressure ... - csecplates

Champak steel is a Stockholders and Suppliers of ASME SA 285 Gr C Plates, A285 Grade C Carbon Steel Plate, ASTM A285 Grade C pressure vessels Plates, SA285 Gr.C Boiler Steel Plate, A285 Grade C Welded Steel Plates

A285 PVQ Steel Plate - ASTM A285 Grade C | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA285 steel plates are intended for fusion-welded pressure vessels. Plates are normally supplied in the as-rolled condition. Please call Leeco Steel at 1-888-828-7897 to be connected to a member of our sales team who can share more information about A285 plate steel.

ASTM A285 Grade A|A285 Gr.A|A285GrA Vessel Steel Plate ...

ASTM A285 Grade A|A285 Gr.A|A285GrA Vessel Steel Plate ASTM A285 standard specification for pressure vessel plates, carbon steel, low- and intermediate-tensile strength. ASTM A285 plates are normally supplied in the as-rolled condition.[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 5 ASTM Specifications continued SPECIFICATION A283 Grade C A283 Grade D A285 Grade A A285 Grade B A285 Grade C Type of Steel Carbon Carbon Carbon Carbon Carbon Requirements for Delivery A6 A6 A20 A20 A20 Tensile Strength (ksi) 55/75 60/80 45/65 50/70 55/75 Yield Strength (Min. ksi) (Yield Point ...

A285 PVQ Steel Plate - ASTM A285 Grade C | Leeco Steel, …

leecosteel› …› Pressure Vessel (PVQ) Steel PlateLeeco Steel distributes A285 PVQ steel plates that are intended for fusion-welded pressure vessels. ASTM A285 plates are normally supplied in the as-rolled condition. Our A285 steel plates are used in a variety of industries including construction, military, and more. We offer various thicknesses, lengths, and widths to meet your specifications.

ASTM A285 Grade A|A285 Gr.A|A285GrA Vessel Steel Plate ...

ASTM A285 Grade A|A285 Gr.A|A285GrA Vessel Steel Plate ASTM A285 standard specification for pressure vessel plates, carbon steel, low- and intermediate-tensile strength. ASTM A285 plates are normally supplied in the as-rolled condition.

ASTM A285 Grade B steel plate steel plate

ASTM A285 Grade B steel plate is intended for use in standard tanks and boilers rather than high pressurised vessels due to its lower yield strength. With good forming and welding characteristics, ASTM A285 Grade B steel plate is supplied throughout the oil gas and petrochemical industry.

ASTM A285 steel plate size - pressure vessel steel plate ...

ASTM A285 Grade B steel plate steel plate. ASTM A285 Grade B steel plate is intended for use in standard tanks and boilers rather than high pressurised vessels due to its lower yield strength. With good forming and welding characteristics, ASTM A285 Grade B steel plate is supplied throughout the oil gas and petrochemical industry.

Steel Plate Grades - Continental Steel & Tube Company

ASTM A285 STEEL (GRADE C) in fire box and flange quality designed for fusion welded boilers and pressure vessels where moderate strength and good forming is required. ASTM A515 STEEL (GRADE 70) has greater strength than A285 and intended for intermediate and high temperature boilers and pressure vessels.

Pressure Vessel Steel Plate - Carbon Steel ASTM A516 Steel ...

A285 Grade C . ASTM A285 specification covers carbon steel plates of low- and intermediate-tensile strengths which may be made by killed, semi-killed, capped, or rimmed steel. ASTM A285 plates are intended for fusion-welded pressure vessels. ASTM A285Plates are normally supplied in …

Carbon Steel Plate - Ryerson

Our stock includes a range of sizes and grades that can be difficult to find from a single supplier, including A36 /SA36, A572 Grade 50, A516 Grade 70, A514, AR400, AR500, 1020, 1045, 4140, ABS Grade A, ABS Grade AH36, ABS Grade DH/EH36 and API 2H Grade 50.

ASTM A285 Grade C Steel Plates

steelplates.in› Pressure Vessel Steel Plate› ASTM A285If you are interested in purchasing ASTM A285 Grade C steel plates, or have any queries, please feel free to email us on [email protected] or call us on +919892451458. Metline is a specialized supplier of ASTM A285 Grade C steel sheets and plates. We can offer A285 Grade C pressure vessel steel plates in a variety of thickness and sizes at ...

Standard Specification for Pressure Vessel Plates, Carbon ...

ASTM A285 / A285M-17, Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength, ASTM International, West Conshohocken, PA, 2017, astm…

Astm A285 Grade C Plate, Astm A285 Grade C Plate ... - …

Road Plate astm a285 gr c steel plate Professional Supplier for astm a36 astm a106 astm a53 grade b sch40 black Steel Plate Cutting & Welded & Painting * 1 . cutting the larger plate into the small sizes customer demand, cut by drawing, cut to specialsizes * 2 .

GUIDE TO SELECTION- PLATES | The Metal Store

The Metal Store stocks carbonand alloy steel PVQ plates to the following ASTM specs: ASTM A285 – Apopular, moderate strength steel for stationary service vessels and boilers.Stocked up to 2” thick, they have excellent formability and weldability.Stocked in PVQ-S4 Grade C. Ident. Color: blue and gold.

ASTM A283/ ASME SA283 PVQ Steel Plate | BBN Steel

astm a131 a&b / abs a&b astm a131 / abs ah36 / abs dh36 / abs eh36 api 2h grade 50 astm a633 PVQ Steel Plate ASTM A516/ ASME SA516 ASTM A537/ ASME SA537 ASTM A283/ ASME SA283 ASTM A285/ ASME SA285

ASTM A285 GR C Steel Plate-GNEE GROUP Discount Steel …

A285 Gr C Boiler & pressure vessel steel plates,also named as pressurevessel steel plates which including carbon steel and alloy steel for High or intermediate and low temperature services.Main steel grades in boiler steel plates supplied by Xinsteel were approved by …

ASTM A285 - SSAB

The ASTM A285 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength intended for fusion-welded pressure vessels. Three grades having different strength levels are available in thicknesses up to 2", inclusively.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.