Tel: +86-371-86151827

hot rolled gb t1591 q460d steel plate

Steel grade:hot rolled gb t1591 q460d steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot rolled gb t1591 q460d steel plate Introduction

GB/T1591 Q460D low alloy high strength steel plates - BBN ...

For any demands or information of Q460D steel plates, welcome to communicate with BBN steel freely. BBN Steel is specializing in GB/T1591 Q460D low alloy high strength steel plates which is under GB/T specification.GB/T1591 Q460D low alloy high strength steel plates has excellent mechanical properties and widely application.

GB/T1591 Q460D HSLA structural steel plates - BEBON steel

BBN steel not only supply GB/T1591 Q460D HSLA structural steel plates, but also provide processing, such as cutting, welding, drilling, bending, etc. For any demands or information of Q460D steel plates, welcome to communicate with BBN steel freely.

Q460D,Q460D PLATE,Q460D STEEL - Mild steel plate ...

GB/T1591 Q460 contains three different steel grades as Q460C,Q460D and Q460E.Structural steel Q460D shall be done impacting test at low temperature minus 20 degree centigrade.Normalised heat treatment suggested to be done for low alloy steel plate Q460D in heavy thickness,Quenched and tempered is also adopt when end users demand.

GB/T1591 steel coil - Sell various grades of steel plates ...

Sell GB/T1591 steel coil - Q345A,Q345B,Q345C,Q345D,Q345E,Q390A,Q390B,Q390C,Q390D,Q390E,Q420A,Q420B,Q420C,Q420D,Q420E,Q460C,Q460D,Q460E with chemical and mechanical ...

GB-T1591 Q690D Steel Plate supplier__Steel Supplier

GB-T1591 Q690D Steel Plate supplier . Gangsteel sellGB-T1591 Q690D Low alloy and high strength steel plate, heavy plate and wide, heavy plate. Q690D Adopt standard: GB-T1591 Standard Specification is for Rolled Steels for Welded Structure; Q690D Specification: Thickness: 1mm to 500mm; Width: 1500mm to 4500mm: Length: 3000mm to 27000mm

Hot Rolled GB/T1591 Q390D steel plate - BEBON steel expert

Hot Rolled GB/T1591 Q390D steel plate is high strength low alloy steel.GB/T1591 Q390D steel plate shall be done impacting test at low temperature minus 20 degree centigrade. Normalised heat treatment suggested to be done for low alloy steel plate GB/T1591 Q390D steel plate in heavy thickness.

Gb t1591 Q345c Carbon High Strength Steel Plate

GB-T1591 Q345C Carbon steel plate__Steel SupplierGB-T1591 Q345C Carbon steel plate . Gangsteel sellGB-T1591 Q345C Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill at Unitedsteel Group. Q345C Adopt standard: GB-T1591 Standard Specification is for Rolled Steels for Welded Structure

GB/T1591 Q345B Carbon and Low-alloy High-strength Steel …

Any request for GB/T1591 Q345B Carbon and Low-alloy High-strength Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

GB-T1591 Q345B Carbon steel plate__Steel Supplier

GB-T1591 Q345B Carbon steel plate . Gangsteel sellGB-T1591 Q345B Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Q345B Adopt standard: GB-T1591 Standard Specification is for Rolled Steels for Welded Structure; Q345B Specification: Thickness: 1mm to 500mm; Width: 1500mm to 4500mm: Length: 3000mm to 27000mm

GB T1591 Q345E supplier - pressure vessel steel plate grades

Professional China GB T1591 Q460D steel sheet factory . ... A36 3/8" steel,Astm A36 Steel Plate High Tensile Hot Rolled 4mm Mild Steel Sheet GB/T1591 Q345B Q345C Q345D Q345E steel plate supplier Find this Pin and more on Steel Plate-Discount Steel by Gnee Steel. ... Hot Rolled Steel Plate, Wide Plate, Carbon Structural Steel Plates ...

Gb t1591 Q460d Carbon High Strength Steel Plate

Offer GB T1591 Q460D steel plate stock - KATALOR STEELGB/T1591 Q460D Carbon and Low-alloy High-strength Steel Plate. GB/T1591 Q460D Steel Plate are used in Construction of Bridges, Highway Construction and Other Engineering construction Steel Name: GB/T1591 Q460D Carbon Structural Steel Plate, GB/T1591 Q460D High Strength Structural Steel Plate, GB/T1591 Q460D …

GB T1591 Q460D steel plate - pressure vessel steel plate ...

GB T1591 Q460D steel plate, steel,Hot sell GB T1591 Q460D steel plate, pressure vessel steel plate grades stock in China,China GB T1591 Q460D steel plate, pressure vessel steel plate grades factory. Keeps more than 10,000 tons hot rolled and cold rolled GB T1591 Q460D steel plate, pressure vessel steel plate grades in stock each month.

GB/T1591 steel coil - Sell various grades of steel plates ...

Sell GB/T1591 steel coil - Q345A,Q345B,Q345C,Q345D,Q345E,Q390A,Q390B,Q390C,Q390D,Q390E,Q420A,Q420B,Q420C,Q420D,Q420E,Q460C,Q460D,Q460E with chemical and mechanical ...

GB T 4171 Q295GNH weather proof hot rolled steel sheet ...

BBN Steel mainly export GB T 4171 Q295GNH weather proof hot rolled steel sheet size,Corten A, A588 Grade A, A588 Grade B, A588 Grade C, A588 Grade K,S235J0W, S355J0WP, 09CuPCrNi-A,S355J0W,Q355GNH, Q355NH, SPA-H,A242 Type 1, S355J0WP, S235J0W, Q460NH, Q295NH weather resistant steel plate stock,looking forward to our cooperation!

Gb t1591 Q460d Carbon High Strength Steel Plate

Offer GB T1591 Q460D steel plate stock - KATALOR STEELGB/T1591 Q460D Carbon and Low-alloy High-strength Steel Plate. GB/T1591 Q460D Steel Plate are used in Construction of Bridges, Highway Construction and Other Engineering construction Steel Name: GB/T1591 Q460D Carbon Structural Steel Plate, GB/T1591 Q460D High Strength Structural Steel Plate, GB/T1591 Q460D …

GB/T1591 - steel-plate-sheets

gb/t1591 Main Application: Carbon and Low-alloy High-strength Steel Plate is Widely Used In Construction of Bridges, Riveted, Bolted, And Other Structural Elements Included Drilling Machine, Power Shovel, Electricity Drive Wheel Counter- Mine Trolley, Mineral Product Automobile, Excavator, Car …

GB T1591 Q345E steel plate data sheet - KATALOR STEEL

GB T1591 Q345E steel plate data sheet Advantage: We promise we can offer you the qualified GB T1591 Q345E steel plate data sheet at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many GB T1591 Q345E steel plate data sheet stock in our warehouse, So hereby, we sincerely hope you join us, let's join hands to make you be the No.1 in …

GB/T1591 Q345E Carbon and Low-alloy High-strength Steel Plate

Any request for GB/T1591 Q345E Carbon and Low-alloy High-strength Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

GB-T1591 Q460D, Q460D,Q460D Steel Plate,Q460D Stock,Q460D ...

GB-T1591 Q460D, Q460D,Q460D Steel Plate,Q460D Stock,Q460D supplier Category: Low High Strength and Super Thick Steel Plate Model: Gangsteel Carbon Plate Factory are specialized in exporting GB-T1591 Q460D Low alloy and high strength steel plate, heavy plate and wide, heavy plate, Which is a large steel plate supplier mill at Gangsteel Group.

GB T 4237 1Cr17 advantages - steel grade steel material

1 GB/T 1220 (1992) Stainless steel bars 2 GB/T 3280 (1992) Cold rolled stainless steel sheets and plates 3 GB/T 4237 (1992) Hot rolled stainless steel sheets and plates 4 GB/T 4239 (1991) Cold rolled stainless steel and heat resisting steel strips with advantages of technologies, equipment and price. We serve you with our honesty

steel plate,steel suppliers,carbon steel - GB/T - BEBON ...

GB/T 1591 Q390C hot rolled HSLA steel plates steel plate/sheet GB/T700 Q275 China structural carbon steel plates for welding construct steel plate/sheet 60 1 2 3 Next Last

Give You Our Best Carbon Steel Plate GB T3274 Q420E hot ...

Hot Rolled Products ... Low-alloy steel plate: [Hot Item] Q420e Carbon Structural and Low Alloyed Steel ... China Q420e Carbon Structural and Low Alloyed Steel Plates/Wide Plate, Find details about China Hot Rolled Steel Plate, Wide Plate from Q420e Carbon Structural and Low Alloyed Steel Plates/Wide Plate - Laiwu Royal Trade Co., Ltd.

GB/T1591 Q345B hot rolled high ... - steel-plate-china

GB/T1591 Q345B hot rolled high strength low alloy structural steel plates are 'general purpose' manufacturing steel plates, used for sheet metal, light structural elements of household goods, and similar uses where it won't be used as a major structural component.

GB/T1591 Q345D hot rolled high ... - steel-plate-china

In grade Q345D, Q is the symbol for yield strength, 345 means Q345D steel can bear a minimum yield strength of 345MPa. Moreover, GB/T1591 Q345D steel is a kind of Carbon and Low-alloy High-strength Steel, and GB/T1591 Q345D Steel Plates find their broad application areas in Construction of Bridges, Highway Construction and Other Engineering construction.

Gb t1591 Q420d Carbon High Strength Steel Plate

GB/T1591 Q420D Carbon and Low-alloy High-strength Steel Plate Any request for GB/T1591 Q420D Carbon and Low-alloy High-strength Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

Q460C,Q460C PLATE,Q460C STEEL

High strength low alloy structural steel plate Q460C owned the minimum yield point above 460 Mpa for the thickness equal or above 16mm,and tensile strength shall be above 550 Mpa.Charpy V-notch impacting test shall be done at 0 centigrade for steel plate for Q460C.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.