Tel: +86-371-86151827

38wt a516gr70 plate

Steel grade:38wt a516gr70 plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

38wt a516gr70 plate Introduction

ASTM A516/ ASME SA516 PVQ Steel Plate | BBN Steel

PVQ Steel Plate. SA516 is a carbon steel plate grade utilized primarily in welded pressure vessels for moderate to lower temperature service. This material is produced in grades 55, 60, 65 and 70. This material is also offered in the normalized condition where improved notch toughness is required.

Charpy V-Notch Impact Test for ASTM A516 Plates

The Charpy V-notch impact test for ASTM A516(ASME SA-516) pressure vessel plates: standards, specimen preparing, energy absorption criteria, test temperatures depending on plate thicknesses.

Canadian Plate and Profiles

Canadian Plate & Profiles main objective is the quality supply of Plasma and Flame cut product. Every piece of every order is processed in accordance with strict guidelines set out in our ISO Quality Management System. We process cut material from stock plate sizes 96 x …

Canada CSA 38WT steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 38WT can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

A516Gr70 steel plate - steel plates - BEBON INTERNATIONAL

A516Gr70 steel plate. ASTM A516 Gr 70 /ASME SA516 Gr 70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels and industrial boilers.ASTM A516 Gr 70/ ASME SA516 Grade 70 offers greater tensile and yield strength when compared to ASTM A 516 Gr65 /ASME SA516...

Which material is better between SA515 and SA516?

A516GR70 boiler and pressure vessel steel plates of a similar material is A515GR60, you can buy according to your needs. Both of these materials we can provide, and we are just two kinds of materials can be processed, rolls are made you will need lots of curves.

Asme sa516 grade 70|sa516 grade 60 steel plate specification

Delivery State: SA516-70n reffers to normalized steel plate product, for steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil. Plates with thickness above 40mm are supplied normalized. SA516 grade 70 steel plate density is 0.284 cu/in3 (7861 kg/m3).. Mild test: ASME SA 516-carbon steel plates are manufactured with mill certification following EN10204 3.1 or ...

Standards - CSA Standards - High Strength Plates

The Canadian Standards Association (CSA) provides certification standards for structural steel under the following standards:CSA G40.20-04, "General requirements for rolled or welded structural quality steel" This standard sets out the general requirements and related definitions governing the delivery of structural steel conforming to CSA G40.21.

A516 Grade 70 Steel Plate Suppliers|ASTM A 516 Gr.70 Plate

As well as being available from stock all A516 Grade 70 Steel Plate can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems.Our A516 Grade 70 Steel Plate are sourced from the highest quality steel manufacturers in the world and, like all our suppliers, these manufacturers ...

Asme sa516 grade 70|sa516 grade 60 steel plate specification

Delivery State: SA516-70n reffers to normalized steel plate product, for steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil. Plates with thickness above 40mm are supplied normalized. SA516 grade 70 steel plate density is 0.284 cu/in3 (7861 kg/m3).. Mild test: ASME SA 516-carbon steel plates are manufactured with mill certification following EN10204 3.1 or ...

Canada CSA 38WT steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 38WT can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

A516 Steel Plate - Grade 55, 60, 65, 70 | Leeco Steel, LLC

leecosteel› …› Pressure Vessel (PVQ) Steel PlateA516 steel plate is intended primarily for service in welded pressure vessels where improved notch toughness is important. Plates 1.50” and under in thickness are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. Plates over 1.50” in thickness shall be normalized.

A36 steel plate,steel grades - BBN steel - stupidquotes.info

A36 steel plate,steel grades,offer h beam a36 a572 gr50 spplier price,equivalent g 3116 sg295,erw b e api 5lb astm a53b,low price a36 a572 gr50 spplier,a516gr70 3mm,asme sa537cl2 factory,nm400 steel specifications,09cupcrni-a steel,corten a or b,lr ah36 manufacturers,abs ah36 factory,q345d steel grade,s355jr plate.

A516 Grade 70,A516Gr70---Xinsteel - Mild steel plate ...

A516 Grade 70 boiler steel plates are mainly used in welded pressure vessels where improved notch toughness is important.Generally As rolled is ok for rolling pressure vessel steel plate A516Gr70,however,for improve steel property and toughness,Xinsteel engineers suggest the end users accept rolling A516 Grade 70 steel plates under Normalized,especially for the steel plates thickness …

hot rolled a516gr70 steel plates - alibaba

Alibaba offers 522 hot rolled a516gr70 steel plates products. About 58% of these are stainless steel sheets, 41% are steel sheets. A wide variety of hot rolled a516gr70 steel plates options are available to you, such as aisi, astm, and din.

ASTM A516 Grade 70 Plate,ASME SA516 GR.70 ,SA 516 Gr. …

Superior Steel Oveseas is highly acclaimed manufacturer, supplier & exporter of ASTM A516 GR.70 Plates.We supply high quality Carbon Steel ASME SA516 GR.70 Plates for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry. ASTM A516 Grade 70 Plate is an excellent choice for service in lower than ambient temperature ...

steel plate,steel pipe,steel coil - kouhpayesteel

ASTM A131 Grade B steel plate is a kind of shipbuilding steel which is mainly for shipbuilding and platform.Grade B shipbuilding steel plate is a common tensile strength steel. As a professional A131 Grade B shipbuilding steel plate exporter, Bebon international can supply high quality Grade B steel plate in most competitive price.

supplier of A516 steel equivalent,A36,Q235B,Q345B steel ...

s355jr Boiler and Pressure Vessel Steel Plate. S355JR is a kind of low alloy steel under EN10025 standard. S355JR steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually used to build workshop, bridge, vessels and so on.[PDF]

steels ASTM A516Gr 70 steel plate/sheet for Weldable ...

ASTM A516Gr70 steel plate /sheet ,ASTM A516Gr70 steel plate/sheet ,under ASTM standard, we can regard A516Gr70 steel plate/sheet for simple pressure vessels steel . ASTM A516Gr70/ASME SA516Gr70 is an excellent choice for service in lower than ambient temperature applications, has excellent notch toughness and is used in both pressure vessels ...

A572 Gr 42 standard structural profiles stock - pressure ...

Keeps more than 10,000 tons hot rolled and cold rolled A572 Gr 42 standard structural profiles stock, pressure vessel steel plate grades in stock each month. We …

ASTM A516 Grade 70|A516Gr.70|A516GR70|SA516GR70 …

ASTM A516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASTM A516 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. ASTM A516 grade plates over 40mm in thickness shall be normalized.[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.