Tel: +86-371-86151827

prime cold rolled steel coil steels

Steel grade:prime cold rolled steel coil steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

prime cold rolled steel coil steels Introduction

prime cold rolled steel coil different thickness

Materials 101: Hot Rolled Steel vs. Cold Rolled Steel ...Cold rolled steel sheets and strips are available in a couple of different conditions, including: full hard, half hard, quarter hard and skin rolled. The full hard condition reduces the thickness of the steel by as much as 50 percent, while the other conditions create less of a reduction.

Prime Cold-rolled Steel Coil Wholesale, Home Suppliers ...

And whether prime cold-rolled steel coil is cold rolled, or hot rolled. There are 15,945 prime cold-rolled steel coil suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Vietnam, and Mexico, which supply 98%, 1%, and 1% of prime cold-rolled steel coil respectively.

Products — Camden Yards Steel Company

Camden Yards Steel Company buys prime domestic steel and imports prime foreign steel that it processes to make carbon steel sheets, plates and coils for sale and distribution to manufacturers and other smaller service centers that produce lighting fixtures, truck and trailer parts, cabinets and furniture, tools and dies and many other products.Location: 2500 Broadway, Drawer 14 Camden, NJ 08104 United States

Prime Cold Rolled Steel Coils, Prime Cold Rolled Steel ...

Alibaba offers 16,031 prime cold rolled steel coils products. About 74% of these are steel sheets, 12% are stainless steel sheets, and 4% are stainless steel strips. A wide variety of prime cold rolled steel coils options are available to you, such as jis, aisi, and astm.

prime hot rolled pre painted steel coils

Home - Italiacciai. Founded in 1991, it is an Italian company operating in carbon flat international trading (prime , non prime category ,secondary ) as pre-painted, galvanized, cold rolled, hot rolled, stainless steel , coils and sheet and strip.

Home - Cold Rolled Steel | Specialty Strip & Oscillating, Inc.

Founded in 1994. Supplier of conventional slit 5/8" to 48" or slit oscillated prime coils in cold rolled low carbon, high carbon, alloy and stainless. Provides oscillated prime coils of steel with 20 to 25 miles of continuous strip. Oscillated coils are continuous, connected by welding and if needed, annealed and ground to gauge.

Cold Rolled Steel - Metal Supermarkets

Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling. This process will produce steel with closer dimensional tolerances and a wider range of surface finishes.

Steel Coils - Commerce Steel Corp.

Your #1 Steel Distributor for Hot Rolled, Cold Rolled, and Coated Steel Sheets and Coils. Truth is, with so many types and sizes of steel on the market, it can be a huge challenge to find the exact item you need when you need it. We encourage you to call us.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Nippon Steel & Sumitomo Metal manufactures Cold-Rolled Steel Sheets and Coils under integrated control that manages everything from raw materials to fi nished steel products, utilizing state-of-the-art equipment. The features of our products are as indicated below.

Steel Canada Limited - Official Site

Carbon Flat Rolled. A Hot Rolled Sheet is the most basic type of flat-rolled steel. It can be utilized in its original form or serve as base metal for Cold Rolled and Coated Steel products.

B. PRIME, & PRIME OVERROLLED AND SECONDARY STEEL …

b. prime, & prime overrolled and secondary steel coils/sheets WE TRADE PRIME/ OVERROLLED/ SECONDARY EG/GI/CR AND OTHERS COILS/ SLIT COILS MOSTLY FROM AUSTRALIA, JAPAN, KOREA, TAIWAN , CHINA , EUROPE , CANADA , UAE , SINGAPORE, MALAYSIA , …

China Prime Cold Rolled Galvenized Steel Sheet/Coil ...

Cold Rolled Coil, CRC, Coil manufacturer / supplier in China, offering Prime Cold Rolled Galvenized Steel Sheet/Coil, S235jr, Ss400, A36 Hot Rolled H Steel Beam/H Iron Beam, Standard H Beam for Structure Buildings and so on.

B. PRIME, & PRIME OVERROLLED AND SECONDARY STEEL COILS ...

b. prime, & prime overrolled and secondary steel coils/sheets WE TRADE PRIME/ OVERROLLED/ SECONDARY EG/GI/CR AND OTHERS COILS/ SLIT COILS MOSTLY FROM AUSTRALIA, JAPAN, KOREA, TAIWAN , CHINA , EUROPE , CANADA , UAE , SINGAPORE, MALAYSIA , …

prime high quality cold rolled steel coils sheet

Cold Rolled Steel - Cold Rolled Steel Sheet & Coil Supplier | Curtis . Curtis Steel is a leading supplier of cold rolled steel sheet & coil for a variety of applications Cold Rolled Steel is a mill product made with a high degree of gauge at all its facilities to ensure our coils and sheets arrive to you in prime …

Prime Cold Rolled Steel Coils | Salvex

Auction for Prime Cold Rolled Steel Coils. Global Marketplace for Asset Recovery & Surplus Inventory

Steel Prices: Cold-Rolled Coil Hits a 5-Year High, Will ...

agmetalminer› Metal PricesU.S. Cold rolled-coil prices rose to their highest levels since March of 2012 this week. Spot steel prices saw some upward action in January, however, prices really came under pressure in early ...

prime hot rolled steel coil for pipe

BBN steel is world class raw iron and steel materials supplier, A36 prime hot rolled steel sheet in coil for steel pipe and profile,the main steel materials we supply are mild steel, low alloy steel, alloy steel, vessel steel, corten steel and weatherproof steel, pipeline steel, gas cylinder steel, shipbuilding steel, stainless steel., etc.

Grade 201 Prime Hot Rolled Cold Rolled Stainless Steel Coils

201 304 400 stainless steel strips or coils: We have own stainless steel factories and experienced international business team. So our prime products and best …

China Prime Cold Rolled Steel Coils - China Cold Steel ...

Prime cold rolled steel coils Our Services Application 1. Heat-resistant kitchen utensils 2. Electrical accessories 3. Medical equipment 4. Auto parts 5. Construction decoration and other fields JIS-410s: Heat-resistant kitchen utensils, blades, bucket covers, pump parts and press plates, burner etc.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Nippon Steel & Sumitomo Metal’s High-Strength Cold-Rolled Steel Sheets and Coils are classified into the following six categories, depending on their forming properties such as strength, ductility, and balance between strength and yield point.

Cold rolled coil News, Prices & Expert Analysis | Metal ...

Global Cold rolled coil news, Cold rolled coil prices and expert analysis. Fastmarkets MB. ... Hot Rolled Coil; Cold Rolled Coil; Coated steels; Plate; Electrical steels; Latest news. CIS FLAT STEEL: Market steady but insiders disagree on next moves ... Steel; Flat products; Cold Rolled Coil; Cold Rolled Coil Top news stories.

Coil Steels

Coil Steels carries a full range of Hot Rolled, Cold Rolled, Coated and Painted BlueScope products. To complement our BlueScope products range we also carry a wide range of high quality, imported steel products that are not readily available from other sources.

China Prime Quality Laiwu Steel Cold Rolling Coils SPCC ...

Cr Coil, Steel Coil, Coil manufacturer / supplier in China, offering Prime Quality Laiwu Steel Cold Rolling Coils SPCC, B500b Reinforced Deformed Steel Bar, High Quality Deformed Steel Bars HRB400! ! ! Deformed Steel Bar! ! ! Deformed Steel Bars for Construction! ! ! and so on.

Secondary Steel - Excess Prime Steel - Over Rolled Steel ...

Secondary Steel, Excess Prime Steel, Over Rolled Steel. Steel Canada Limited (SCL) North America`s largest direct exporter of Secondary, Excess Prime and Over Rolled steel.

Prime flat rolled steel products - srilankasports.org

Steel calculator for flat rolled steel, prime steel, and more. If you’re considering placing an order for flat rolled steel, cold rolled steel, or any of our other steel products, we encourage you to use this online steel calculator to determine the weight, length, outside diameter, and pounds per inch of your order.

Prime Cold Rolled Steel Coil(id:5500044). Buy Taiwan CR ...

cold rolled steel coil (prime):quality:jis g3141 spcc-sd.sb (cq1 , cqs , cq2) leeway cold rolled / hot rolled steel coil galvanized steel sheet in coils (prime) secondary cold rolled steel sheet /coil(1b full hard quality) secondary pickling rolled and hot rolled steel sheet /coils (po soft quality)

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.