Tel: +86-371-86151827

sa633 gr c steel plate specification

Steel grade:sa633 gr c steel plate specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sa633 gr c steel plate specification Introduction

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel ...

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

SA633 Grade C,SA633GrC,SA633 Gr.C steel plate--Xin Steel ...

ASME SA633 Grade C structural quality steel plate meets specifications covering normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction; it is the standard specification for normalized high-strength low-alloy structural steel plates.

ASME SA633 Gr.C/SA633 Grade C structural steel plates ...

ASME SA633 Gr.C/SA633 Grade C structural steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

ASME SA633/SA633M steel coil - Grade A, Grade c, Grade D ...

Sell and export ASME SA633/SA633M steel coil - Grade A, Grade c, Grade D and Grade E with chemical and mechanical properties. Contact us for width, length, thickness and solutions.

ASTM A633 Grade A C D E for Sale

Carbon And Low-Alloy High-Strength Steel Plate; ASTM A633 / ASME SA633; ... Low-Alloy Structural Steel Plates. ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade: ASTM A633Grade A,C,D,E (A633GRA, A633GRC, A633GRD ...

ASTM A633 Marine & OffShore Steel Plate | BBN Steel

A633 is a normalized high-strength low-alloy structural steel plate. It is suited for service at low ambient temperatures of —50°F or higher where notch toughness better than expected is desired.

ASME SA633 Gr. D/SA633 Grade D high strength low alloy ...

ASME SA633 Gr. D/SA633 Grade D high strength low alloy HSLA steel plates are for welded, riveted, or bolted construction.The SA633 Grade D steel plates are mainly used in oil, chemical, power station, boiler and other industries for the production of reactor, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shell, boiler drum ...[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;

ASTM A573 Gr70 steel plate Material steel plate

ASTM A573 Gr70 steel plate is common used in carbon steel plate with improved toughness.ASTM A573 Gr70 steel plate is a kind of common carbon structure steel plates.Regarding to mechanical properties of A573GR70 steel,the minimum yield strength shall above 290 Mpa and tensile strength shall within 485-620 Mpa.

Standard Specification for Normalized High-Strength Low ...

Abstract. This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. This material is suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level.[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

Charpy V-Notch Impact Toughness requirements are not included in the basic specification, but may be ordered as a supplementary requirement. A minimum Charpy V-notch impact energy value of 25 ft-lbs [34 J] at -40°F [-40°C] in longitudinal specimens is a typical ... Thickness, width, and length tolerances for A633 Grade E steel plate are in ...

SA283 Grade C Specs - pressure vessel steel plate grades

A283 Grade C Plates ASTM A283 Grade C Carbon Steel plate, ASME SA283 Gr.C Tensile Strength Plate Exporters ASME SA633 Grade E steel specification China Best Steel BBN steel can offer A36,A283 Grade C,A572,SA283 steel stock in China,if you need ASME SA633 Grade E . SA285 Gr.A Boiler and pressure vessel steel plate

ASME SA633 Grade A Specs - pressure vessel steel plate …

ASME SA633 Gr D steel plate factory - KATALOR STEEL. A302 Grade D China pressure vessel plate Specs-A537 ASME SA302 Grade C pressure vessel plate mill A537CL3 multifunctional pressure vessel plate factory Alloy Steel, (S)A 203/(S)A 203M,Spec,steel materialASTM A302 Grade C steel plate grade specification covers molybdenum alloy

SA633 Gr C data sheet - pressure vessel steel plate grades

ASME SA633 Gr E low alloy steel sheet - braunjp. The ASME SA633 Gr C carbon and low alloy steel plate is the mainly product in BBN, It has a wide range of uses, and many customers buy large quantities of ASME SA633 Gr C carbon and low alloy steel plate from our company every month. ASTM A283 GR C 25mm Carbon - srilankasports.org

SA633 Grade C,SA633GrC,SA633 Gr.C steel plate--Xin Steel ...

ASME SA633 Grade C structural quality steel plate meets specifications covering normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction; it is the standard specification for normalized high-strength low-alloy structural steel plates.

Steel Plate ASME SA633/SA633M Grade A B C D in Large …

Steel Plate ASME SA633/SA633M Grade A B C D in Large Stock. Mechnical and chemical properties of ASME SA633Grade A C max Si Mn P S Mo Ni 0.18 0.15-0.50 1.00-1.35 0 ...

ASTM A573 Gr70 steel plate Material steel plate

ASTM A573 Gr70 steel plate is common used in carbon steel plate with improved toughness.ASTM A573 Gr70 steel plate is a kind of common carbon structure steel plates.Regarding to mechanical properties of A573GR70 steel,the minimum yield strength shall above 290 Mpa and tensile strength shall within 485-620 Mpa.

ASTM A36 Steel Plate - Completely Specifications You ...

The machinability rate of this steel plate is approximately 72 percent, and the average surface cutting feed of this A36 is 120 feet per min. This ASTM steel plate is an easy steel to weld and it can be welded by using any type of welding methods and also the welds and joints that are formed are of …

SA283 Gr D low alloy steel sheet specification

SA283 Gr D low alloy steel sheet specification Advantage: We promise we can offer you the qualified SA283 Gr D low alloy steel sheet specification at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many SA283 Gr D low alloy steel sheet specification stock in our warehouse, So hereby, we sincerely hope you join us, let's join hands to make you ...

supplier of a633 gr c uns number,A36,Q235B,Q345B steel ...

supplier of a633 gr c uns number,A36,Q235B,Q345B steel ...ASTM A633 - SSABThe ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness.

A633 Gr.C steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A633 Gr.C can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

SA633 Grade D carbon and low-alloy steel in Egypt

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel ... ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

ASME SA633 steel plate stock - shareme.in

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel ... ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

supplier of asme sa299 sa299m specification suppliers,A36 ...

ASME SA299 Grade A pressure vessel steel plate are specification for carbon steel and Manganese-Silicon.The thin plate SA299 Grade A is produced from steel coil SA299 Grade AAbout ASME SA537 Class 1 and ASTM A537 Class 1 Pressure Vessel Steel. ... China ASME SA633 Gr C steel plate - KATALOR STEEL ...

SA633 Grade C carbon and low-alloy steel in Singapore

ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel ... ASME SA633 Gr.C/SA633 Grade C low alloy carbon steel plates own the minimum yield strength at 345Mpa and tensile strength within 485-620Mpa for thickness equal and belows 65mm, and shall be above 315Mpa and tensile strength within 450-590Mpa for thickness above 65mm.

Steel Plate Grades - Continental Steel & Tube Company

Commercial and Specification Grade Steel Plates are stocked to meet a variety of end use requirements that range from the most unsophisticated storage bin to such highly critical applications as Cryogenic Pressure Vessels.. LOW CARBON PLATE STEEL. Low Carbon Plate Steel is manufactured to three separate carbon ranges that relate to thickness and end use requirements.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.