Tel: +86-371-86151827

structural steel building material steel plate

Steel grade:structural steel building material steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

structural steel building material steel plate Introduction

GoBob Pipe and Steel - Structural Steel and Plate

Save time and money by calling GoBob Pipe & Steel Sales for your steel requirements. GoBob sells from one of the largest and most diverse steel inventories in the United States. Yet you will enjoy our personal service. GoBob works hard to keep our prices low and our selection high.

Metal Building Materials | Steel Building Supplies | Free ...

Scope: This specification applies only to Company supplied steel building materials including framing and bracing, wall and roof cover, connectors and fasteners required for attaching various parts to each other and to the foundation. The following is a list of materials used in fabrication of the Company’s pre-engineered steel buildings: 3.1.2.

Structural steel - Wikipedia

Structural steel is a category of steel used for making construction materials in a variety of shapes. Many structural steel shapes take the form of an elongated beam having a profile of a specific cross section.Structural steel shapes, sizes, chemical composition, mechanical properties such as strengths, storage practices, etc., are regulated by standards in most industrialized countries.Common structural shapes·

Steel Sheet & Plate - Industrial Metal Supply

Your #1 Source for Hot & Cold Rolled Steel Sheet and Plate. Industrial Metal Supply Co. offers hot and cold rolled steel sheet and hot and cold rolled steel plate in a broad range of lengths, widths, gauges, alloys, and specifications to meet your material requirements.[PDF]

STRUCTURAL STEEL TERMS/ LAYOUT AND FABRICATION …

STRUCTURAL STEEL TERMS/ LAYOUT AND FABRICATION OF STEEL AND PIPE ... buildings, bridges, and advanced base structures. Therefore, you, as a Seabee Steelworker, must have a ... Steel PLATE …[PDF]

SECTION 7 - STRUCTURAL STEEL - New York State Thruway

SECTION 7 STRUCTURAL STEEL 7-1 SECTION 7 - STRUCTURAL STEEL. 7.1 - STRUCTURAL STEEL TYPES ... and availability of material. While Grade 50 and 50 Weathering (W) steels are available in rolled shapes and plates, Grade 36, High Performance Steel (HPS) Grades 70W and 100W steels are only available in plates.

Metal Buildings: Column and Beam Steel Frame Structures

Column and beam steel frames. Column and beam steel frame structures have a skeleton of steel connected by bolts or welds that act as the support for the rest of the building. A column and beam frame can be braced or continuous.[PDF]

STRUCTURAL STEEL DESIGN AND CONSTRUCTION

4 Code – The Code of Standard Practice for Steel Buildings and Bridges as published by the American Institute of Steel Construction. Column – a structural element that usually carries its primary loads in compression or tension parallel its axis. Column Base – usually a thick plate at the bottom of a column through which anchor bolts mechanically connect the column and transfer forces to the[PDF]

B Structural Steel and Steel Connections

APPENDIX B: Structural Steel and Steel Connections from A36 steel plate and were 36 inches x 14–16 inches with plate thickness from 3/4 inch to 4 inches. Above floor 84, rolled or welded built-up I-shaped sections were used.

Steel - Wikipedia

Steel is an alloy of iron and carbon, and sometimes other elements.Because of its high tensile strength and low cost, it is a major component used in buildings, infrastructure, tools, ships, automobiles, machines, appliances, and weapons.. Iron is the base metal of steel. Iron is able to take on two crystalline forms (allotropic forms), body centered cubic and face centered cubic, depending on ...Definitions and ...·

Structural Steel - Metal Mart

Metal Mart offers high quality prefabricated steel buildings, metal roofing, steel building materials, carports, hardware & accessories and much more!

Structural Steel - Metal Mart

Metal Mart offers high quality prefabricated steel buildings, metal roofing, steel building materials, carports, hardware & accessories and much more![PDF]

STRUCTURAL STEEL DESIGN AND CONSTRUCTION

4 Code – The Code of Standard Practice for Steel Buildings and Bridges as published by the American Institute of Steel Construction. Column – a structural element that usually carries its primary loads in compression or tension parallel its axis. Column Base – usually a thick plate at the bottom of a column through which anchor bolts mechanically connect the column and transfer forces to the

Steel Plate Grades - Continental Steel & Tube Company

ASTM A36 PLATE STEEL is a structural quality product designed for use in welded, bolted, or riveted fabrications such as oil rigs, buildings and bridges.Produced with a min. yield of 36,000 psi, A36 plate can be used in the construction of a variety of lightweight structures and equipment where good welding properties are important.

Steel Building Glossary of Terms for Steel Building Kits

Worldwide Steel Buildings provides this glossary of common terminology & descriptions used with custom metal buildings. When buying a steel building, make sure to be knowledgeable. Find answers to your questions & other information about custom steel buildings by contacting Worldwide Steel Buildings at (800) 825-0316.

Advantages of Steel - Midwest Steel, INC

The structural steel industry continues to pioneer new innovations for both the material and the use of structural steel. The structural steel industry pioneered the movement toward open standards and interoperable software that has most recently resulted in the growth in popularity of Building …

Steel Sheet & Plate - Industrial Metal Supply

Your #1 Source for Hot & Cold Rolled Steel Sheet and Plate. Industrial Metal Supply Co. offers hot and cold rolled steel sheet and hot and cold rolled steel plate in a broad range of lengths, widths, gauges, alloys, and specifications to meet your material requirements.[PDF]

SECTION 7 - STRUCTURAL STEEL - New York State …

SECTION 7 STRUCTURAL STEEL 7-1 SECTION 7 - STRUCTURAL STEEL. 7.1 - STRUCTURAL STEEL TYPES ... and availability of material. While Grade 50 and 50 Weathering (W) steels are available in rolled shapes and plates, Grade 36, High Performance Steel (HPS) Grades 70W and 100W steels are only available in plates.[PDF]

Minimizing Structural Steel’s Impact on Building …

the tried-and-true structural details—half-inch steel plates and angle legs extending out to support masonry, continuous steel canopy and balcony beams cantilevering out from the interior structure through the building wall (see Figure 1), and steel-to-steel …

Metal Buildings 101 – the basics of metal building systems ...

Specification (Metal Building System) A statement of a set of Metal Building System requirements describing the loading conditions, design practices, materials and finishes. Splice A connection in a structural member. Splice Plate 1. See "Butt Plate" 2. In Roofing, a metal plate placed underneath the joint between two sheets of metal. Spud Wrench

Tacoma Steel

Tacoma Steel is the "laser plate cutting" leader in the Northwest. We are able to handle everything from gauge material through 1-1/4" steel plate. Laser cutting is highly accurate. We can consistently save money for our customers by reducing their shop time preparation of parts.

Metal Buildings: Column and Beam Steel Frame Structures

Column and beam steel frames. Column and beam steel frame structures have a skeleton of steel connected by bolts or welds that act as the support for the rest of the building. A column and beam frame can be braced or continuous.

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.[PDF]

Specification for Structural Steel Buildings - AISC Home

16.1-iii Specification for Structural Steel Buildings, July 7, 2016 AMERICAN INSTITUTE OF STEEL CONSTRUCTION PREFACE (This Preface is not part of ANSI/AISC 360-16, Specification for Structural Steel Buildings, but is included for informational purposes only.)[PDF]

SECTION 05120 STRUCTURAL STEEL - Metal Works

SECTION 05120 STRUCTURAL STEEL PART 1 - GENERAL 1.1 SECTION INCLUDES ... ASTM A6 "General Requirements for Delivery of Rolled Steel Plates, Shapes, Sheet Piling and Bars for Structural Use". ... fabricating plant and at the building site. Material or workmanship not complying fully with the Contract Documents will not

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.