Tel: +86-371-86151827

1 5 width cold rolled coil

Steel grade:1 5 width cold rolled coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

1 5 width cold rolled coil Introduction

1 5 Width Cold Rolled Steel Coil, 1 5 Width Cold Rolled ...

Alibaba offers 124 1 5 width cold rolled steel coil products. About 57% of these are stainless steel sheets, 16% are steel sheets. A wide variety of 1 5 width cold rolled steel coil options are available to you, such as aisi, en, and astm.

Cold Rolled Coil | North American Stainless

Cold Rolled Coil. NAS provides cold rolled annealed and pickled products in multiple finishes and dimensions. Coils can be supplied in various widths with slitting capabilities both at the mill and at various NAS processing centers throughout the U.S. ... Width: 0.50″ – 60.5 ...

Cold Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsCold rolled steel is commonly used for applications in which dimensional tolerances, strength and surface finish quality are critical. Applications that use cold rolled steel products include metal furniture, automobile components, electronics hardware, home appliances and components, lighting fixtures and construction. Cold Rolled Steel Sheet

CR Coils - CR Sheets, Cold Rolled Coils, Cold Rolled ...

We are offering excellent CR (Cold Rolled) Coils that are made from finest steel metal and produced from hot rolled, before being pickled. The coils are obtained through cold rolling where the metal is melted below its re-crystallization temperature, which enhances their strength.[PDF]

ALUMINIZED COIL AND SHEET COLD ROLLED COIL AND …

Weight per sheet 5-50 GALVALUME COIL AND SHEET 5-23 GENERAL INFORMATION 5-25 HOT AND COLD ROLLED 5-40 Weight per sheet HOT ROLLED COIL AND SHEET General 5-60 Tolerances 5-7 to 5-10 SHEET AND COIL Weight per square foot 5-30 SPECIALTY STEELS 5-24 5MPage 1 5 Sheet and Coil AN/onglets/Fetmet/ Page 9 Eng Tabs_P9 10/18/05 7:20 AM Page 9[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Extra-low-carbon Cold-Rolled Steel Sheets and Coils with excellent deep-drawing workability. Automobile oil pans, high roofs, extra deep drawn parts 2. Special-Purpose Cold-Rolled Steel Sheets and Coils Nippon Steel & Sumitomo Metal’s High-Strength Cold-Rolled Steel Sheets and Coils are classified into the following six

Cold Rolled Metals Coils For Weathering Resistant Steel ...

Cold Rolled Metals Coils For Weathering Resistant Steel , Find Complete Details about Cold Rolled Metals Coils For Weathering Resistant Steel,05cupcrni Cold Rolled Metals Coils --weathering Resistant Steel--cr Crc --size 1.5*1250*c,Cr Coils Plates 1.5*1250*c,Cold Rolled Metal Weather Resistant Steel from Steel Sheets Supplier or Manufacturer-Liaocheng Huajian Steel Co., Ltd.

The Difference Between Hot Rolled Steel and Cold Rolled ...

The diameter of 5.5-40 mm, coil, all is hot rolled material. After cold drawing, it is cold drawing material. Steel Rod. Generally hot rolled in addition to fine bright materials with precise size, also has forging materials (the surface has forged marks). Strip Steel. Both hot rolled and cold rolled, cold rolled materials are generally thinner.[PDF]

Hot-Rolled Steel Sheets and Coils

Hot-Rolled Steel Sheets and Coils meeting a variety of standards ranging ... Size are available from 1.2 mm to 25.4 mm in thickness and from 600 mm to 2180 mm in width. Technical ... strength cold-rolled steel sheets. Automobile structural components, suspensions,

Hot Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsSlit Width Tolerance: +/-.005. Alliance Steel’s hot rolled steel sheet & coil service capabilities include slitting, shearing, blanking, stretcher leveling, degreasing and brushing and metallurgical support. Hot rolled steel products will scale when in contact with oxygen and water vapor after the forming process.[PDF]

Standard Specification for Steel, Strip, High-Carbon, Cold ...

Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For1 This standard is issued under the fixed designation A 682/A 682M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

Steel Warehouse Company: Coil Calculators

Steel Coil Calculators. Below you will find a useful and easy to use online tool for calculating the Coil Weight, Maximum Coil OD, and Coil Lineal Feet.

COLD ROLLED COIL SPECIFICATIONS – JIS G 3141 (1996) | …

Cold Rolled Coil Specifications; News; Contact us; Phu My Flat Steel Company (PFS) - Viet Nam Steel Coporation ... COLD ROLLED COIL SPECIFICATIONS – JIS G 3141 (1996) 1.QUALITY AND SYMBOL. Table 1. Symbol of quality. Symbol of quality. Remarks. ... Discrimination according to nominal width. Under 630. 630 or over to and excl. 1000.[PDF]

COLD ROLLING MILL FACILITY for STEEL COIL and SHEET

intended for pickled hot rolled and cold rolled strip Manufacturer FATA Hunter - Production Machinery YoM 1978 Type Pull -through line Coil Coil weight max. 24 t Strip width max. 1.320 mm Strip thickness max. 5 mm Entry/exit coil inside diameter 610 mm Cutting Line Min. slit strip width …[PDF]

Cold Rolled Coils and Sheets - SAIL

Steel Plant also produces cold rolled coils and sheets to the following foreign specifications : ASTM A 568/366, BS-1449-Pt-1, JIS G 3141 SPCC/CD, DIN-1623 St 12.3 or equivalent, if sufficient orders are available. Rourkela Steel Plant : Rationalised Sizes of CR Coils Thickness (mm) Width (mm) 0.35, 0.4 900 0.5, 0.63 900/1000 0.8, 1.0, 1.25 900 ...

Metal Coils - Cold Rolled Coils Manufacturer from Chennai

We offer Cold Rolled Coils ends that are highly demanded in various production industries. At the stage of manufacturing process the HR the ends are removed. Same as in case of CR, the ends are removed. This concept is known as Head End or tail end, which is a part of our trade.

Cold rolled iron or non-alloy steel, coil, width >600mm, t ...

Cold rolled iron or non-alloy steel, coil, width >600mm, t 1-3mm, nes are the 501st most traded product and the 2010th most complex product according to the Product Complexity Index (PCI).. The top exporters of Cold rolled iron or non-alloy steel, coil, width >600mm, t 1-3mm, nes are China ($719M), South Korea ($711M), Belgium-Luxembourg ($524M), Japan ($377M) and Germany ($330M).

430/1.4016 Stainless Steel Coil - STAINLESS STEEL COIL ...

430/1.4016 Stainless Steel Coil. Stainless steel, also known as inox steel, is a steel alloy with a minimum of 10 5% chromium content by mass PRODUCT INQUIRY

2019 trending products cold rolled steel coil suppliers ...

Hot rolled coil is typically 2-25mm thick and up to 1500mm wide. Hot rolled coil is produced as a feedstock for cold rolled coil and coated coil, but also for direct use in a variety of industrial applications including steel tubes used in transport, construction, shipbuilding, gas containers, pressure vessels and energy pipelines.

Cold Rolled

Cold rolled steel is produced by further processing hot rolled steel through cold reduction mills (at room temperature) followed by annealing and/or temper rolling to produce steel with closer dimensional tolerances and a wider range of surface finishes.

Categories Material Shape Archive | All Metals Supply

Portfolio Category: Material Shape . ... PLATE AND FLOORPLATE SIZE AND WEIGHT CHART COLD ROLLED STEEL Standard Specification = CS-Type-B Offers Close Thickness Tolerance Better Surface Finish Than Hot Rolled Better Surface Finish Than Pickled/Oiled Smooth Dull Surface Ideal For Paint Smooth Dull Surface Ideal Electroplate Can Bend Flat On ...

Steel Coils - Hot Rolled Steel Coil Manufacturer from Mumbai

Hot rolled coil is rolled on a hot strip mil fromHot Rolled Steel Coil is rolled on a hot strip mill from slabs. It is usually either in coil or sheet form and is further processed into finished products by the manufacturer. Hot rolled coil is typically 1.5 to 25 mm thick and up to 2,250 mm wide.

Cold Rolled Coils - Manufacturers, Suppliers & Exporters ...

Thickness, mm : 1.6 – 6.0; Width, mm : 1270; Cold rolled coils, Cold rolled close annealed steel coils are made from Hot Rolled Coils. Cold Rolling is a process through which the Hot Rolled steel sheet or strip after Pickling process is introduced between rollers by application of high pressure at temperature below the re-crystallization ...

Cold Rolled Steel(CR) | Dana Steel UAE - Adding Value to ...

Cold Rolled Steel Supplier UAE - DANA STEEL . We are leading suppliers of Cold Rolled Steel coils and sheets in UAE.We are exporting to OMAN,BAHRAIN,SAUDI ARABIA,KUWAIT,AFRICA and other neighboring countries.Our Cold Rolled Steel Coils , Sheets and …

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Available for use in a wide variety of applications, Outokumpu cold rolled coil, strip and sheet products are put to work across all industries and markets. Heat- and corrosion-resistant, lightweight yet strong, durable and fully recyclable, stainless steel coil, strip and sheet is exceptionally versatile.

Cold Rolled Coils : Manufacturers, Suppliers, Wholesalers ...

Find Cold Rolled Coils Suppliers. Request for quotations and connect with international Cold Rolled Coils manufacturers. Page - 1. Help ... Cold Rolled Coil Most common size table Thickness (mm) : 0.3 - 4 Width (mm) : 914 - 1500 Standard : JIS, ASTM, SAE, EN

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.