Tel: +86-371-86151827

6mm thick cladding steel plate astm a516 gr70 steels

Steel grade:6mm thick cladding steel plate astm a516 gr70 steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

6mm thick cladding steel plate astm a516 gr70 steels Introduction

6mm thick cladding steel plate astm a516 gr70 - cafethuys.nl

6mm thick cladding steel plate astm a516 gr70 - alibaba6mm Thick Cladding Steel Plate Astm A516 Gr70 , Find Complete Details about 6mm Thick Cladding Steel Plate Astm A516 Gr70,6mm Thick Cladding Steel Plate Astm A516 Gr70,Astm Sa387 Low Tempreture Boiler Steel Plate,St44-3 Low Alloy Steel Plates from Steel Sheets Supplier or Manufacturer-Shandong Jingen International …[PDF]

Plate to ASTM A516 - 3.imimg

ASTM A516 plate up to and including 40mm in thickness is normally supplied as rolled but may be ordered normalised. Plate thicker than 40mm as well as plate on which notch toughness tests are required must be normalised. If plate to ASTM A516 is required with improved notch toughness, it may be quenched and tempered,

A516 Gr70 Carbon Steel Plate 6mm Thick for Container

Astm A516(gr55,Gr60,Gr65,Gr70) Factory Supply Steel Plate ... ASTM A516(GR55,GR60,GR65,GR70) Factory Supply steel plate astm a516 gr70 Large Stock weight of steel plate 6mm thick Packaging when each plate weight is under 1 ton, it will be in bundle with steel strips 2-4, when each plate weight is over 1ton, it will be piece by piece.

ASTM A516 Gr.70 boiler plate, A516 Gr.70 boiler steel ...

ASTM A516 Gr.70 boiler plate is an excellent choice for service in lower than ambient temperature applications. A516 Gr.70 boiler steel has excellent notch toughness and is used in both pressure vessels and industrial boilers.. ASTM A516 Gr.70 boiler plate contains manganese, phosphorus, sulfur and silicon at the highest levels allowed by the ASTM.

ASTM A516GR70 Steel Plate - BEBON STEEL

ASTM A516GR70 Steel Plate . ASTM A516GR70 steel plate is a standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASTM A516GR70 Steel Plate can be ordered normalized or stress relieved, or both. ASTM A516 grade plates over 40mm in thickness are recommended being normalized.

China A516 Gr70 Carbon Steel Plate 6mm Thick for …

Carbon Steel Plate, A516 Gr70 Steel Plate, Carbon Steel Plate 6mm Thick manufacturer / supplier in China, offering A516 Gr70 Carbon Steel Plate 6mm Thick for Container, China Supplier A106b Carbon Seamless Steel Pipe for Sale, U Type Hot Rolled Cold Formed Steel Sheet Piles and so on.

ASME SA516 GRADE 70 | ASTM A516 Grade 70 - …

We believe that when our customers require ASTM A516 Grade 70 plates on an ex-stock basis they don’t want to have to buy plates from several different places. So we have one of the largest stocks of ASTM A516 Grade 60 steel plates in Northern Europe to ensure that in most cases we are able to deliver all your requirements on an ex-stock basis.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

Asme sa516 grade 70|sa516 grade 60 steel plate specification

ASTM/ASME SA516 Carbon Steel Plate for Pressure Vessels: ... especialy with thick steel plate. ... If you need more detailed info on ASME A516 Gr-70 of steel plate or boiler steel plate of other standard, don't hesitate to send a message now from our professional sales and expert team!

ASTM A516 Grade 70 Plate,ASME SA516 GR.70 ,SA 516 Gr. …

ASTM A516 Grade 70 Carbon Steel Plates is one of the most popular steels for boilers, pressure vessels and heat exchangers.ASTM A516 Grade 70 carbon steel plates is excellent at low temperature and have good results on standard Charpy V Notch toughness tests. A516 70 is according to the ASTM standard A516/A516M .We are also stockholder of SA516/516M GR.70 plate of all thicknesses and ...

ASME SA516 Grade 70 Boiler Quality Steel and Pressure ...

ASME SA516 Grade 70 Boiler Quality Steel and Pressure Vessels Steel Plate. ASME SA516 Grade 70 Size: Thickness: 6MM to 300MM, Width: 1500mm to 4050mm, Length: 3000mm to 15000mm. ASME SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. For plates thinner than 40mm normally supply as ...

Astm A516 Gr70 Alloy Steel Plate, Astm A516 Gr70 Alloy ...

Alibaba offers 134 astm a516 gr70 alloy steel plate products. About 38% of these are steel sheets. A wide variety of astm a516 gr70 alloy steel plate options are available to you, such as gb, aisi, and astm.

ASTM A516 Grade 70 steel price and A516 Grade 70 ...

BBN steel as a steel exporter,export ASTM A516 Grade 70 steel to all over the world,we can offer all kinds of alloy steel stock,here offer ASTM A516 Grade 70 steel price and A516 Grade 70 Equivalent. ASTM A516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service.

A516 Gr70 Carbon Steel Plate 6mm Thick for Container

Astm A516(gr55,Gr60,Gr65,Gr70) Factory Supply Steel Plate ... ASTM A516(GR55,GR60,GR65,GR70) Factory Supply steel plate astm a516 gr70 Large Stock weight of steel plate 6mm thick Packaging when each plate weight is under 1 ton, it will be in bundle with steel strips 2-4, when each plate weight is over 1ton, it will be piece by piece.

A516 Grade 70,A516Gr70---Xinsteel - Mild steel plate ...

A516 Grade 70 boiler steel plates are mainly used in welded pressure vessels where improved notch toughness is important.Generally As rolled is ok for rolling pressure vessel steel plate A516Gr70,however,for improve steel property and toughness,Xinsteel engineers suggest the end users accept rolling A516 Grade 70 steel plates under Normalized,especially for the steel plates thickness …

ASTM A516 Grade 65 Plates, ASME SA 516 GR.65, SA516 …

ASTM A516 Grade 65 Carbon Steel Plates “Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service”, is widely used by designers and engineers . ASTM A516 Grade 65 carbon steel plates is one of the most popular steels for boilers, pressure vessels and heat exchangers. SA516 GR.65 plate is excellent at low temperature and have good results ...

ASTM A516 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A516. The ASTM A516 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service for plates used in pressure vessel applications where excellent notch toughness is required. Four grades having minimum Tensile Strengths ranging of 55 ksi to 70 ksi are available.

ASTM A516 Grade 70 Plate,ASME SA516 GR.70 ,SA 516 Gr. 70 ...

ASTM A516 Grade 70 Carbon Steel Plates is one of the most popular steels for boilers, pressure vessels and heat exchangers.ASTM A516 Grade 70 carbon steel plates is excellent at low temperature and have good results on standard Charpy V Notch toughness tests. A516 70 is according to the ASTM standard A516/A516M .We are also stockholder of SA516/516M GR.70 plate of all thicknesses and ...

ASME SA516 Grade 70 Boiler Quality Steel and Pressure ...

ASME SA516 Grade 70 Boiler Quality Steel and Pressure Vessels Steel Plate. ASME SA516 Grade 70 Size: Thickness: 6MM to 300MM, Width: 1500mm to 4050mm, Length: 3000mm to 15000mm. ASME SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. For plates thinner than 40mm normally supply as ...

Steel Plate Grades - Continental Steel & Tube Company

Steel Plate Grades. Carbon Steel: A36, A572 GR 50, A588 (Corten type), 1045, A516 GR 70, ... ASTM A516 STEEL (GRADE 70) is similar to A515 but is intended for lower temperature applications. It is also silicon killed, but has a finer grain and improved notched …

ASME SA516 Grade 70 HIC Resistant Steel Plates| SA516 ...

Prosaic Steel and Alloys have Huge Ex-Stock Inventory of ASME SA516 Grade 70 HIC Resistant Steel Plates, ASTM A516 Grade 70 HIC Resistant Steel Plates, HIC Tested Plates, HIC Resistant Steel Plates. Premium Supplier and Stockholder of ASME SA516 Grade 70 HIC Resistant Steel Plates, A516 Grade 70 HIC Tested NACE MRO175 Sour Service Plates.

steel plate astm a516 gr70 gr60 gr50 - w3s.in

A572 Gr50, A572 Gr50 Suppliers and Manufacturers at ... astm a387 gr.12 a515 gr70 a572 42 steel plate a516 gr.70 thick plate astm a572 gr50 steel plates rectangular tube astm a572 50 erw astm a333 gr8 low temperature pipe hot astm a334 gr3 astm 516 gr 70 gr p11 pipe a516 carbon steel plates a516 astm a 516 gr 70 a516 gr60 steel plate gr 01 gr 60 70 steel plate astm a53 gr a alloy steel astm …

hot rolled SA516 GR70 steel plate - hopkinsplasticsurgery

SA516 Gr 70 Carbon Steel Boiler Plate Suppliers and … Tags Carbon Steel plate Suppliers, Boiler Plates, ASTM A516 plate Stockists, Grade 70 Boiler Quality Plates, ASME SA516 Gr 70 Plates Exporters, SA516 Gr.70 Pressure Vessel Plates Manufacturers, A516 GR70 Dealers, SA516 Gr 70 steel plate …

carbon steel backing thick a516 gr70 - srilankasports.org

About 100% of these are steel sheets. A wide variety of a516 gr70 steel plate weight options are available to you, such as free samples. ... plate a516 gr70 steel plate astm a516 gr70 alloy steel plate a516 gr70 steel plate for pressure vessel hot rolled astm a516 gr70 carbon steel plate astm a516 gr70 hot ... carbon steel backing thick a516 ...[PDF]

CHARACTERIZATION OF AISI 317L STEEL WELD …

CHARACTERIZATION OF AISI 317L STEEL WELD CLADDING ON ASTM A516 GR 60 STEEL USED IN OIL AND GAS SECTOR ... stainless steels are deposited onto carbon steel ...

A516 Gr70 Steel Plate, A516 Gr70 Steel Plate ... - Alibaba

Alibaba offers 442 a516 gr70 steel plate products. About 79% of these are steel sheets, 1% are stainless steel sheets. A wide variety of a516 gr70 steel plate options are available to you, such as aisi, astm…

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.