Tel: +86-371-86151827

hssd 2738 p20 modified plastic die steel plate

Steel grade:hssd 2738 p20 modified plastic die steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hssd 2738 p20 modified plastic die steel plate Introduction

China Hssd 2738, P20 Modified Plastic Die Steel Plate ...

Mould Steel, Mold Steel, Die Steel manufacturer / supplier in China, offering Hssd 2738, P20 Modified Plastic Die Steel Plate, Structural Alloy Tool Bearing Steel Pipe for Making Tools (SAE52100 EN31), Hot Rolled Alloy Tool Bearing Steel Tube with High Hardness (SAE52100 GCr15 EN31 SUJ2) and so on.

China 1.2738/P20 +Ni B30H Baosteel plate for plastic mould ...

Plate, steel plate, mould steel manufacturer / supplier in China, offering 1.2738/P20 +Ni B30H Baosteel plate for plastic mould, Structural Black Surface Alloy Bearing Steel Pipe For Tools (SAE52100 GCr15 EN31 SUJ2), Hot Rolled Alloy Bearing Tool Steel Pipe with High Hardenability (SAE52100 GCr15 EN31 SUJ2) and so on.

China Tool Steel manufacturer, Special Steel, Die Steel ...

Hssd 2738, P20 Modified Plastic Die Steel Plate ... Cold Work Tool Steel 1.2379, Alloy Steel Plate 1.2379, 1.2379 Alloy Tool Steel

Buy P20 Mould Steel - w3s.in

China Hssd 2738, P20 Modified Plastic Die Steel Plate, Find details about China Mould Steel, Mold Steel from Hssd 2738, P20 Modified Plastic Die Steel Plate . Plastic Mould Steel P20, Plastic Mould Steel P20 .

Din 1.2738 Tool Steel| DIN 2738 Mould Steel | Plastic ...

DIN 1.2738 is specially used for Plastic injection die moulds. The characteristics of a material are right sharpening, photo-etching properties with high purity and good homogeneity. DIN 2738 is upgraded version of plastic mold steel 0f 2311, which normally supply in Pre hardened condition.

W 1.2738 (P20) | Industeel

W 1.2738 (P20) A prehardened mold steel (300 HB/32 HRC) for thick sections Material properties. 300HB (32 HRC) prehardened grade specialty designed for plastic mold industry, for medium and very large – size moulds and tools with good machinability.

P20 Tool Steel - West Yorkshire Steel - Only £25 UK ...

P20 tool steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are stockholders and suppliers of P20 tool steel round bar, flat bar and plate. P20 is an alloy tool steel which offers good machineability even in the hardened and tempered (Brinell 300) condition.

plastic die work hot rolled carbon steel plates - w3s.in

Hot rolled steel plate factory in China offer Plastic mold steel in stock P20 hot rolled Plastic mold steel in stock P20 steel plate ,If you want buy Plastic mold steel in stock P20 price,contact [email protected] at any time. ... P20 Modified Plastic Die Steel Plate, Find details about China Mould Steel, Mold Steel from Hssd 2738, P20 ...

High Quality P20 Mold Steel Made In China

Mould Steel, Die Steel, Mold Steel manufacturer / supplier in China, offering Professional Manufacturer 1.2311 P20 Special Steel Plate for Mold Plastic, 1.4104 AISI 430f Stainless Steel Plate Flat Steel Bar, H13 Special Steel Bar for Making Tool and so on.

plastic die work hot rolled carbon steel plates - w3s.in

Hot rolled steel plate factory in China offer Plastic mold steel in stock P20 hot rolled Plastic mold steel in stock P20 steel plate ,If you want buy Plastic mold steel in stock P20 price,contact [email protected] at any time. ... P20 Modified Plastic Die Steel Plate, Find details about China Mould Steel, Mold Steel from Hssd 2738, P20 ...

P20 Steel Material - hopkinsplasticsurgery

P20 Steel Plate | P20 Mold Steel | 1.2311 - Otai Special Steel. AISI P20 Steel Plate Material is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The special purpose mold steel P20 steel plate is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc.

plastic die work hot rolled carbon steel plates

Wholesaler of Plastic Mold Steel - Mold Steel 2083 ESR, Plastic Mold Steel P20 1.2738, P20 2311 Alloy Steel Plates offered by Bansal Steel … China Hot Sale Alloy Cold Work Special Die Steel Plate … Hot Rolled Seamless Steel Tubing Suppliers - ThomasNet

Knowledge - Hubei Kaixin Supply Chain Management Co.Ltd ...

Plastic Mould Steel for Injection Molding (Hssd 2738/P20 modified) [Sep 16, 2017] 1.2738 40crmnnimo8-6-4 Plastic ... [Sep 14, 2017] Plastic Mould Steel Die Steel Round Bar Steel Nak80 P21 [Sep 14, 2017] DIN1.2311 P20 Plastic Mould Steel [Sep 14, 2017 ... Alloy Steel Plastic Mould Steel Plate 1.2083 [Sep 08, 2017] High Quality SKD1 AISI D3 Mould ...

Plastic Mold Steel - P20 1.2738 Plastic Mould Steel ...

Manufacturer of Plastic Mold Steel - P20 1.2738 Plastic Mould Steel, P20 1.2311 DIN Plastic Mold Steel, Plastic Mould Steel P20 1.2311 and Plastic Mould Steel Bar offered by P. B. International, Mumbai, Maharashtra.

China S420N steel plate - pressure vessel steel plate grades

Plastic mold steel in stock P20 - Hot rolled steel plate . Otai Special Steel is a reliable supplier and sincere business partner of high speed steel, hot works and cold works steel, plastic mold steel and engineering steel. China Hssd 2738, P20 Modified Plastic Die Steel Plate. Finished Products Qualified No Hurl 201 Stainless Steel

Tool Steel 1.2738, Tool Steel 1.2738 Suppliers and ...

Alibaba offers 298 tool steel 1.2738 products. About 39% of these are steel round bars. A wide variety of tool steel 1.2738 options are available to you, such as aisi, astm, and din.

High Quality P20 Mold Steel Made In China

Mould Steel, Die Steel, Mold Steel manufacturer / supplier in China, offering Professional Manufacturer 1.2311 P20 Special Steel Plate for Mold Plastic, 1.4104 AISI 430f Stainless Steel Plate Flat Steel Bar, H13 Special Steel Bar for Making Tool and so on.

P20S Tool Steel - West Yorkshire Steel - ISO 9001 Approved

West Yorkshire Steel are stockholders and suppliers of P20S steel round bar, flat bar and plate. P20+S is a high tensile alloy tool steel grade supplied in the hardened and tempered condition. With its higher sulphur content it offer better machinability than P20 plastic mould tool steel grade.[PDF]

04-2014 LKM Steel Rainbow Chart - lkmj.co.jp

Plastic injection mould which requires high wear resistance & toughness, e.g. mould with thin wall design or production of plastic part with high Glass Fiber content (30-50%); hot forging and stamping dies; cold work dies for heavy duty cold blanking (with 10 mm or above thick material), forming and etc.

mould steel die steel - onlineshoppingsitesinindia.co.in

Steel Bar, Steel Plate, Mould Steel manufacturer / supplier in China, offering Pre-Harden P21 Alloy Tool Steel Round Bar, 1.2312 P20 S Plastic Mould Steel Rod Bar, P20 Pre-Harden Die Steel 1.2311 Alloy Tool Steel Round Bar and so on. forged mould making steel - natural-elements-online

D2 1.2379 SKD11 tool steel - srilankasports.org

China DC53/SKD11/D2/1.2379 Cold Work Tool Steel Plate ... D53 modified form D2/1.2379/SKD11 etc, with high wear resisting cold working die steel, HSSD DC53 steel has the properties of high strength and high wear resistant, replace a new generation imported common cold working die steel with high obdurability high wear-resisting.

USA ASTM P20 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. P20 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.[PDF]

TOOL STEEL - P20 PLASTIC MOULD STEEL - Global …

TOOL STEEL - P20 PLASTIC MOULD STEEL RELATED SPECIFICATIONS: Germany W.Nr 1.2738 USA AISI P20 DESCRIPTION: Plastic mould steel prehardened to 29 – 33HRC. Uniform hardness distributed evenly in large cross-sections. Excellent weldability with least hardness elevation. Good mirror polishability and less streak texture making finishing easier.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.