Tel: +86-371-86151827

sa514 grade q steel plate specification

Steel grade:sa514 grade q steel plate specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sa514 grade q steel plate specification Introduction

Steel specification ASME SA514GRQ,SA514 Grade Q plate …

Worldwide steel base Xinsteel Group roll high quality and wide-heavy common carbon structural steel plate sa514grq,sa514 grade q steel,sa514grq steel grade,asme sa514 gr q steel plate.

A-514-High Yield Strength, Quenched ... - Alloy steel

aasteel› …› Construction / Bridge Building (HSLA)Overview

SA514 alloy steel,ASME SA514 alloy steel plate - JOIN WIN ...

SA514 alloy steel plate Location: Join-win steel > ... Specification : ASME SA514 is a kind of structural steel. ASME SA514 steel is used for bridge building. ASME SA514 has eight grades: A514 Grade A, A514 Grade B, A514 Grade E, A514 Grade F, A514 Grade H, A514 Grade P, A514 Grade Q, A514 Grade S…

SA514 Grade Q steel plate,SA514 Grade Q steel sheet - JOIN ...

SA514 Grade Q is a high-strength quenched and tempered alloy steel plate under ASME standard. ASME SA514 Grade Q steel plate/sheet is mainly used for welding bridge and other structures with thickness less than or equal to 6in.

SA514 Grade Q - w3s.in

SA514 Grade Q steel plate,SA514 Grade Q steel sheet - … SA514 Grade Q is a high-strength quenched and tempered alloy steel plate under ASME standard. ASME SA514 Grade Q steel plate/sheet is mainly used for welding bridge and other structures with thickness less …

ASTM A514 Steel Plate - Grade B, E, F, H, Q, S | Leeco ...

leecosteel› …› Alloy Quenched & Tempered (Q&T) Steel PlateFor over 130 years, Leeco Steel has distributed ASTM A514 plate steel that is most commonly used as a structural steel in building construction, for cranes or other large machines supporting heavy loads. ASTM A514 steel plate has a strength of 100 ksi/690 MPa. We offer A514 heavy steel plates various thicknesses, lengths, and widths to meet your specifications.

Steel Plate ASME SA514/SA514M Grade P Q M C A in Large …

Steel Plate ASME SA514/SA514M Grade P Q M C A in Large Stock. Mechanical and chemical properties of ASME SA514 GradeQ C Mn P S SI Ni Cr Mo V Ti Zr Cu B 0.14-0.21 0.95-1.30 0.035 0.04 0.15-0.35 1.20-1.50 1.00-1.50 0.40-0.60 0.03-0.08 ~ ~ ~ ~ Thickness ... JIS G3141 steel coil specification; NM500 wear resistant steel; NM450 wear resistant steel ...

ASTM A514 Alloy & Abrasion Resistant Steel Plate | Chapel ...

Alloy & Abrasion Resistant Steel Plate. ... Applications include truck & trailer frames, heavy construction equipment, and crane booms. BBN Steel stocks this material in Grades B, H, E, F & Q. Request Info. Mechanical Properties: Tensile: up to 2.5” 110 to 130 ksi over 2.5” to 6” 100 to 130.[PDF]

Plate - ArcelorMittal

Available Grades ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical ...

ASTM A514 / A514M - 18 Standard Specification for High ...

A514 / A514M-18 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding yield strength~ welded construction~ steel plates~ ... 1.2 If the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized.

Steel specification ASME SA514GRQ,SA514 Grade Q plate …

Worldwide steel base Xinsteel Group roll high quality and wide-heavy common carbon structural steel plate sa514grq,sa514 grade q steel,sa514grq steel grade,asme sa514 gr q steel plate.

SA514 Grade Q - pressure-vessel-steel

Alloy structural steel plate SA514 Grade Q is under American steel standard ASME SA 514/SA 514M. A514 Alloy & Abrasion Resistant Steel Plate | … A514 Steel is a conventional quenched and tempered Alloy Steel Plate designed for structural applications.1-800-745-3962. Steel specification ASME SA514GRQ,SA514 Grade Q …

SA514 Grade T plate - Mild Cold Rolled steel plate

ASME SA514 Grade A steel plate/sheet is mainly used for welding bridge and other structures with thickness less than or equal to 6in.(150mm). Quenched and tempered alloy structural steel plate. SA514 Grade E steel plate,SA514 Grade E steel plate steel . SA514 Grade E is a high-strength quenched and tempered alloy steel plate under ASME standard.

SA514 Grade Q steel plate,SA514 Grade Q steel sheet - …

SA514 Grade Q is a high-strength quenched and tempered alloy steel plate under ASME standard. ASME SA514 Grade Q steel plate/sheet is mainly used for welding bridge and other structures with thickness less than or equal to 6in.

SA514 Grade Q - carbon-steeltube

ASME SA514 Grade Q steel plate - sa204steel. SA514 Grade Q is a high-strength quenched and tempered alloy steel plate under ASME standard. ASME SA514 Grade Q steel plate/sheet is mainly used for welding bridge and other structures with thickness less than or equal to 6in. SA514 Grade Q steel plate,SA514 Grade Q steel sheet - …

Give You Our Best Carbon Steel Plate ASME SA514 Grade Q ...

SA514 Grade A steel plate,SA514 Grade A steel sheet - … SA514 Grade A is a high-strength quenched and tempered alloy steel plate under ASME standard. ASME SA514 Grade A steel plate/sheet is mainly used for welding bridge and other structures with thickness less than or equal to 6in. SA514 Grade A steel plate - sa204steel

ASME SA514/ SA514M Grade B Quenched and ... - TJC Steel

ASME SA514/ SA514M Grade B Quenched and Tempered Alloy Steel Plate TJC Steel can supply SA514 Grade B/ SA514 GrB Quenched and Tempered Alloy steel plate, mainly used in construction with high request of yield strength and welding.

ASME SA514 Gr.B Plate, ASTM A514 T-1 steel, ASTM A514 ...

ASTM A514 T-1 Steel Plates high strength alloy steel which has been mill heat treated and has excellent weldability.ASTM A514 Grade S platesprovides good formidability and toughness in a high strength low weight steel.SA514 Grade B High yield Strength plate used in cranes, trailers, mining and hauling equipment all use A514 steel. ASME SA514 Grade E Plate can be cut with a variety of methods ...

SA514 Grade R Specs - steel grade steel material

(As Hot Rolled only),TMCP ASME SA533/SA533MManufacturer of ASME SA514 Grade B Plates,ASTM A514 GR.B . steel price of BV AH36 Specs,A36,A516GR70 steel plate . ASME SA514 grade Q steel plate is a high strength weldable steel plate quenched and tempered under ASME SA514…

SA514 Grade P distributor - Mild Cold Rolled steel plate

China ASME SA514 Grade T HR plate sheet specification . ASME SA514 Gr.B Plate, ASTM A514 T-1 steel, ASTM A514 ASME SA514 Grade E Plate can be cut with a variety of methods and can be machined using conventional equipment and carbide tools.Buy SA514 Tempered Steel plates at affoirdable price from us. ... ASME SA514 Grade Q mild steel plate ...

Give You Our Best Carbon Steel Plate SA514 Gr T steel ...

ASME SA514 has eight grades: A514 Grade A, A514 Grade B, A514 Grade E, A514 Grade F, A514 Grade H, A514 Grade P, A514 Grade Q, A514 Grade S. Steel specification ASME SA514GRA,SA514 Grade A plate … As the most expert structural steel plate supplier,BBN Steel offer customers sa514gra,sa514 grade a steel,sa514gra steel grade,asme sa514 gr a ...[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;[PDF]

Plate - usa.arcelormittal

Available Grades ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical ...

ASME SA514 Grade Q HSLA steel sheet property

ASTM A-572 Grade 50 This high strength, low alloy steel plate offers an optimum combination of strength, weldability and notch toughness with economy. ... this grade of ASTM A516/ ASME SA516-70 is normally found in moderate and lower temperature applications. ... Steel Aluminum Sheet/Plate Inquire on minimum hole capability.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.