Tel: +86-371-86151827

plastic low temperturer steel plate

Steel grade:plastic low temperturer steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

plastic low temperturer steel plate Introduction

Plastic low temperturer steel plate - w3s.in

Plastic low temperturer steel plate: Practical 8 Carbon Steel Pipe Cap - acorncontrols.co.in Butt Weld Stainless Steel 304 Cap - zzsteels· SS304 Butt Weld Cap is a stainless steel pipe fittings which butt weld onto the exterior of a pipe to block off the end of a pipeline system.

Q&A : What is the difference between LTCS and Carbon steel?

*LTCS is a Nickel based alloy steel plates especially used for low temperature applications below - 150 deg F. Mainly used in cryogenic construction of space ships, low temperature application in chemical plant below -55 deg C. Examples: SA-203 Steel Plate Grades A, B, D, E and F Nickle Alloy Steel Plates. For low temperatures (-150 deg F)

low temperature lng steel - hopkinsplasticsurgery

Cryogenics - Wikipedia In physics, cryogenics is the production and behaviour of materials at very low temperatures. A person who studies elements that have been subjected to extremely cold temperatures is called a cryogenicist. It is not well-defined at what point on the temperature scale refrigeration ends and cryogenics begins, but scientists assume a ...

AISI 101 low temperature carbon steel plate

AISI 1010 Carbon Steel (UNS G10100) - AZoMAISI 1010 carbon steel is a plain carbon steel with 0.10% carbon content. This steel has relatively low strength but it can be quenched and tempered to increase strength. The following datasheet provides more details about AISI 1010 carbon steel.

Plastic Strip Curtains | McMaster-Carr

Choose from our selection of plastic strip curtains, including door strips and rolls, strip doors, and more. In stock and ready to ship.

Amazon: Plate Steel - Plastic

amazon› Search› Plate SteelJarvis 30 Series 3-1/2" Diameter Advantage Heat Flat Wheel Swivel Plate Caster with Stainless Steel Ball Bearing, 3-5/8" Length X 2-3/8" Width Plate, 225 lbs Capacity

Steel properties at low and high temperatures - Total Materia

Steel Properties at Low Temperatures Aircraft and chemical processing equipment are now required to work at subzero temperatures and the behavior of metals at temperatures down to -150°C needs consideration, especially from the point of view of welded design where changes in section and undercutting at welds may occur.

Polypropylene Sheet / Plate - Online Metal Store

View the "Plastic Guide" for grades, shapes & various properties. Choose a product category Copolymer Polypropylene Sheet / Plate - Black Copolymer Polypropylene Sheet / Plate - Natural[PDF]

I LOW TEMPERATURE METALS

I LOW TEMPERATURE METALS" A. Hurlich General DynamicslAstronautics San Diego, California Before we consider how low temperatures affect the engineering properties 'of spe- cific metals and alloys, we should review the general effects of low temperature upon the properties of metals. As the temperature is lowered, the hardness, yield strength,

DIY Rosin Press – LowTemp Plates

Lowtemp Plates DIY Rosin Press. Turn any press into a commercial scale capable Rosin Press in less than 5 Minutes!

Plastic Strip Curtains | McMaster-Carr

Choose from our selection of plastic strip curtains, including door strips and rolls, strip doors, and more. In stock and ready to ship.

Carbon Steel Low Temperature Bend, Buttweld Fittings ...

Kalikund Steel is one of the Manufacturer & Exporter of Carbon Steel Low Temperature Bend, Low Temperature Buttweld Fittings, Low Temperature Forged Fittings, Low Temperature Outlets, Low Temperature Flanges, Low Temperature Pipe, Low Temperature Plate, Low Temperature Bar.[PDF]

High-Performance Plastic Materials Guide - Plexiglass …

High-Performance Plastic Materials Guide. Polyimide Materials (PI) ... Vespel in manufactured in plates up to 10” x 10”. Meldin® 7001 Polyimide ... 400°C (752°F), or very low, -269°C (-452°F) temperature extremes. Kapton polyimide film is used in a wide variety of applications such as substrates for flexible printed circuits,

supplier of low temperature steel pipe in stock,A36,Q235B ...

Low Temperature Pipe, Valves, Fittings & Flanges - US MetalsU.S. Metals is a premier worldwide supplier for Low Temperature Pipe, Tubes, Buttweld Fittings, Flanges, Forged Fittings, Forged Valves, Cast Valves. Our ability to provide Low Temperature inventory on a project basis is one of our strongest capabilities and is unmatched in our industry.

P20 Steel Plate | 1.2311 | 3Cr2Mo | Plastic Mold Tool Steel

7. Applications of P20 Steel Plate or Bar. P20 tool steels are used for low temperature applications that include injection molds and die casting dies. Main applications of P20 steel plate and bar: Plastic moulds, die holder, backers, rames for plastic pressure dies, hydro forming mold tools.bolsters, die …

Effects Of Low Temperature on Performance of Steel ...

Designing Equipment For Low Temperatures – Part 1. Related Content: *Note* there is now a Part 2 of the Effects of Low Temperature on Performance of Steel & Equipment When designing equipment for low-temperature applications, it is important to keep in mind that low temperatures can adversely affect the tensile toughness of many commonly-used engineering materials.

High Strength Low Alloy Steel Plate - INFRA-METALS

This application covers carbon steel plates of low and intermediate-tensile strength and is intended for fusion-welded pressure vessels. The plates are available in three grades having different strength levels. ASTM – A515 – Standard specification for pressure vessel plates, carbon steel, for intermediate-and-higher-temperature service.

ASTM 1075 low temperature carbon steel plate - w3s.in

About 83% of these are steel sheets. A wide variety of aisi 1075 carbon steel plate options are available to you, such as astm, aisi, and bs. ... 1 4 inch steel plate low temperature carbon steel plate mild steel checker plate astm a36 steel plate stainless steel deck plate mild steel ... Industry Carbon Steel Sheet Plate Price 1075 Per Ton ...[PDF]

I LOW TEMPERATURE METALS

I LOW TEMPERATURE METALS" A. Hurlich General DynamicslAstronautics San Diego, California Before we consider how low temperatures affect the engineering properties 'of spe- cific metals and alloys, we should review the general effects of low temperature upon the properties of metals. As the temperature is lowered, the hardness, yield strength,[PDF]

Deformation induced martensite in AISI 316 stainless …

Deformation induced martensite in AISI 316 stainless steel(•) N. Solomon* and I. Solomon** Abstract The forming process leads to a considerable differentiation of the strain field within the billet, and finally causes the non-uniform distribution of the total strain, microstrusture and …[PDF]

CHAPTER 1 PROPERTIES OF STRUCTURAL STEELS AND …

example, all steels covered by ASTM A588, “Specification for High-Strength Low-Alloy Structural Steel,” are called A588 steel. Most of them can also be furnished to a metric designation such as A588M. 1.1 STRUCTURAL STEEL SHAPES AND PLATES Steels for structural uses may be classified by chemical composition, tensile properties, and method of[PDF]

Delrin Data Sheet 2/03 - San Diego Plastics Inc.

talline plastic which offers an excellent balance of properties that bridge the gap between metals and plastics. DELRIN® possesses high tensile strength, creep resist-ance and toughness. It also exhibits low moisture absorption. It is chemically resist-ant to hydrocarbons, solvents and neutral chemicals. These properties along with its fatigue ...

Minimum temperature range for common low carbon steels ...

eng-tips› …› Metal and Metallurgy engineering ForumOct 07, 2004· For plates only, a specification like ASTM A 516 - "Pressure Vessel Plates, Carbon Steel, for moderate and lower temperature Service". Order with supplementary requirement S5 Charpy impact test. ASTM A 573 - "Structural Carbon Steel Plates of Improved Toughness". These steels are made to a fine-grain practice.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.