Tel: +86-371-86151827

4140 high strength steel plate

Steel grade:4140 high strength steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

4140 high strength steel plate Introduction

Kromite® #3 | HT 4140 Steel | Associated Steel Corporation

High Strength Steels Kromite® #3 4140/4150 (modified) Hot Roll, Heat Treated, High Strength Alloy. Kromite #3 is a modified 4140/4150 steel. Typical hardness is Rockwell “C” 28/34. This chromium and molybdenum based alloy is electric furnace melt, vacuum degassed, stress relieved, and …

4140 Steel | Associated Steel Corporation

Typical tensile strength 156,000 PSI. This proprietary product provides elevated strength and deep uniform hardness, excellent cleanliness, and refinement to the grain structure to enhance the fatigue resistance of the steel. Good choice of steel for machined parts requiring higher resistance to toughness and general impact resistance.

9839 | 4140 | 4140 | ALLOY | Metals | Castle Metals Site

Alloy 4140 (AISI 4140) is one of the most popular direct hardening Cr-Mo alloy steel plates that have the ability to develop an extensive range of hardness and strength. Alloying elements and thermal treatments, such as quenching and tempering, greatly influence the hardness and strength of the steel.

4140 High Tensile Steel | Interlloy | Engineering Steels ...

4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved machinability, which greatly increases feeds and/or speeds, while also extending tool life without adversley affecting mechanical properties.

MetalsDepot® - 4140 Alloy Steel Flat Bar

4140 Alloy Steel Flat is an cold drawn annealed steel of relatively high hardenability with its chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength. 4140 Alloy Steel Flat responds well to heat-treatment and is relatively easy to machine in the annealed condition. 4140 Alloy Steel Flat has good strength and wear resistance ...

4140 Steel Plate | Precision Grinding, Inc.

4140 Steel General Information. 4140 alloy steel is a low alloy steel that contains chromium, molybdenum, and manganese. Because it contains chromium and molybdenum it is sometimes referred to as chromoly steel. It has high fatigue strength, excellent strength to weight ratio, abrasion and impact resistant, good ductility, and has excellent ...

MetalsDepot® - High Strength Steel Plate - Buy Online!

Shop Online for - Impact Resistance A514, T1 steel plate, Pressure Vessel Quality A516 steel plate, High Strength A572 steel plate, A588 Corten weathering steel plate, Abrasive Resisting AR400 steel plate, and Military Grade 46100 Armor Plate. Metals Depot's High Strength steel plates are ideal for a wide range of structural projects, machinery ...

Speedy Metals Information for 4140 As-Rolled Plate

4140 as-rolled plate is a chromium-molybdenun alloy steel that can be oil hardened to relatively high hardenability. The chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength.[PDF]

HIGH TENSILE STEEL AISI 4140 - S&T Stainless

HIGH TENSILE STEEL – AISI 4140 AISI 4140 Chrome - Moly High Tensile Steel, generally supplied hardened and tempered to Condition “T” in sections up to 100mm, with a tensile strength of 850 – 1000 MPa and aiming for this strength range in larger sections. It offers a very good balance of strength, toughness and wear-resistance.[PDF]

4140 HIGH TENSILE STEEL - interlloy.au

4140 HIGH TENSILE STEEL 4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved

YIELD STRENGTH OF STEEL - amesweb.info

Low and Intermediate Tensile Strength Carbon Steel Plates: ASTM A283 Grade A: 165: 24 (24000) ASTM A283 ... High-Yield-Strength, Quenched and Tempered Alloy Steel Plate: ASTM A514 To 2-1⁄2 in. [65 mm], incl ... Normalized at 870 °C (1600 °F) 655: 95 (95000) AISI 4140 Annealed at 815 °C (1500 °F) 414: 60 (60000) AISI 4140 Water quenched ...

Wingate Alloys Inc.

4140 HT is supplied in many forms such as hot rolled or turned, ground and polished rounds and DCF plate to be used as a holder material for high strength structural components. 4140 Prehard is stocked in a DCF, ground finished; 4140 HT is available in plate, flat bar, or rounds; Large Diameter 4140 …

AISI 4140 Steel Bar | 1.7225 - High Speed Steel, Tool ...

AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist and Exporter. AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications.Similar to alloy grade AISI 4130 chrome moly alloy steel but with a slightly higher carbon content.

4140 Alloy Steel | 1.7225 | SCM440 | 42CrMo4 - OTAI ...

1. SAE AISI 4140 steel Form of Supply. ASTM / AISI 4140 Alloy structural steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and square, block. 4140 alloy steel Round bar can be cut to your required lengths as one offs or multiple cut pieces. Rectangular pieces can be cut from flat bar or plate to your specific sizes.

4140 Alloy Steel Data Sheet - Simply Tool Steel

4140 Alloy Steel Data Sheet. 4140 is an alloy steel that is supplied in either the annealed or prehardened condition. The prehardened condition is heat treated to a medium hardness (HRC 28/32) and is designated as 4140 HT. 4140 annealed is supplied in the soft condition and can be hardened to RC 54. 4140 annealed is designated as 4140 Ann or simply 4140. 4140 HT is supplied in many forms …

YIELD STRENGTH OF STEEL - amesweb.info

Low and Intermediate Tensile Strength Carbon Steel Plates: ASTM A283 Grade A: 165: 24 (24000) ASTM A283 ... High-Yield-Strength, Quenched and Tempered Alloy Steel Plate: ASTM A514 To 2-1⁄2 in. [65 mm], incl ... Normalized at 870 °C (1600 °F) 655: 95 (95000) AISI 4140 Annealed at 815 °C (1500 °F) 414: 60 (60000) AISI 4140 Water quenched ...

4140-HT | Lindquist Steels

4140-HT is a high alloy tool steel that has good strength, toughness, and mechanical properties. 4140-HT comes supplied pre-hardened at 26-32 HRC and is available in Plate, Block, and Round bar forms. For more detailed information download the tech bulletin PDF below: AISI 4140HT Heat Treated

4140 Alloy Steel Supplier | Southern Tool Steel, Inc.

southerntoolsteel› Metals› Alloy SteelMolybdenum, which imparts uniform hardness and high strength Manganese Particularly suitable for forging due to self-scaling properties, 4140 responds favorably to heat treatment—a condition that makes this steel easy to machine.

4140 AISI 4140 SAE 4140 Alloy Steel - SAE AISI 1010 1015 ...

Alloy 4140 is an oil-hardening steel of relatively high hardenability. Its chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength. C4140 responds well to heat-treatment and is comparatively easily machined in the heat-treated condition.

Grade Guide: AISI 4140 Steel | Metal Supermarkets - Steel ...

AISI 4140 steel is a low alloy steel containing chromium, molybdenum, and manganese. It is widely used across numerous industries and is an excellent material choice due to its toughness, high fatigue strength, and abrasion and impact resistance. Not many grades can match the versatility and usefulness of 4140.

4140 Tool Steel Grade, Shape, Size, Tech - Tool Steel ...

It is characterized by its high fatigue strength, torsional strength, abrasion resistance, toughness. The prehardened condition is heated to medium hardness (HRC 26/34) plate to be used as a holder material for high strength structural components. 4140 Tool Steel Shapes and Sizes. 4140 tool steel is available in the following thickness sizes ...

AISI 4140 Chrome-Molybdenum High Tensile Steel

AISI 4140 is a chromium-molybdenum alloy steel. The chromium content provides good hardness penetration, and the molybdenum content ensures uniform hardness and high strength. AISI 4140 chrome-molybdenum steel can be oil hardened to a relatively high level of …

Products – American Metals Corporation

656-80 & 715-80 High Yield; 516-70 Standard specification for pressure vessel plates, carbon steel, for moderate-and-lower-temperature service; AR – 235/400/500 & A514 Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding; Formalloy 400 Standard specification for forming grade high-yield ...

Reliable Steel Supplier

Your Reliable Steel Source. Specialty Steel Company has been selling to steel distributors large and small for over 40 years. In that time, we have become a well-respected and reliable source for your high strength alloys; such as 4140 CF, 4150 HT, and 4150 HT TGP.

A829-4140 Heavy Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate Products› Heavy Steel PlateA829-4140 heavy steel plate is a structural quality, alloy-steel plate that can be supplied in the following conditions: as rolled, annealed, normalized, and normalized and tempered. 4140/4130 heavy steel plate can be used for a wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades.[PDF]

Section G - emjmetals

Sec. G Page 4 4140/42/45/50 unS G41400, G41420, G41450, G41500 41l40/42, 41l50 (leAded) chromium-Molybdenum Steel Bars and Plates color Marking 4140/42/45: Annealed Bars – Ends painted Black and Red Heat Treated Bars – Ends painted Brown and Gold

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.